• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1158-1168
• /
• 1994

For BEM analyses of the impact problems of dissimilar materials, the connected multi-region method using perfect bonded conditions on the interface boundaries was added to two-dimensional Laplace transformed-domain BEM program for a single region analysis. It was confirmed that the BEM results of impact problems of a single-region and multi-regions for a homogeneous isotropic material are agreed well. The two-dimensional Laplace transformed-domain BEM program combined with connected multi-region method was applied to analyse several impact problems of dissimilar materials. Also the feasibility of BEM impact analyses was investigated for dissimilar materials by the analysis of the BEM results for impact problems of dissimilar materials in terms of physical aspects. As for an application, the two-dimensional Laplace transformed BEM concerning impact problems of cracks at the interface of dissimilar materials and the determinating process of the dynamic stress intensity factors by extrapolation method are presented in this paper.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.109-118
• /
• 2019

This paper presents the numerical simulation of membrane structure under impact load. Firstly, the numerical simulation model is validated by comparing with the test in Hao's research. Then, the effects of the shape of the projectile, the membrane prestress and the initial impact speed, are investigated for studying the dynamic response and failure mechanism, based on the membrane displacement, projectile acceleration and kinetic energy. Finally, the results show that the initial speed and the punch shape are related with the loss of kinetic energy of projectiles. Meanwhile, the membrane prestress is an important factor that affects the energy dissipation capacity and the impact resistance of membrane structures.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.311-317
• /
• 2001

The notched Charpy and Izod impact tests are the most prevalent techniques used to characterize the effects of high impulse loads on ploymeric materials. An analysis method for rubber toughened PVC is suggested to evaluate critical strain energy release rates(Gc) from the Charpy impact energy measurements. An Instrumented Charpy Impact tester was used to extract ancillary information concerning fracture properties in addition to total fracture properties and maximum critical loads. The stress intensity factor Kd was computed for varying amounts of rubber contents from the obtained maximum critical loads and also toughening effects were investigated as well.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.335-340
• /
• 2020

본 연구는 도시철도 침목플로팅궤도인 STEDEF궤도구조에 사용되는 침목방진패드의 교체 필요성 및 궤도전반의 거동에 미치는 영향을 실험적으로 분석하고자 침목방진패드 교체 전, 후의 궤도 동적거동을 현장측정을 통해 비교 분석하였다. 연구결과, 노후된 침목방진패드를 신품으로 교체하는 것만으로도 궤도지지강성의 균일성을 확보할 수 있는 것으로 분석되었다. 또한 침목방진패드 교체를 통해 당초 설계 시 고려했던 궤도지지강성의 수준을 회복할 수 있음을 실험적으로 입증하였다. 침목방진패드 교체 이후 측정 궤도충격계수가 대부분 설계기준 이하로 크게 저감되는 것으로 나타나 침목방진패드의 교체를 통해 궤도지지강성을 설계 당시의 수준으로 회복함으로써 동적 윤중 증폭을 감소시킴으로서 궤도에 작용하는 충격을 저감시킬 수 있는 것으로 분석되었다. 따라서 시기적절한 침목방진패드의 교체를 통해 궤도지지강성을 설계 시 고려했던 수준으로 회복시키고 궤도충격수준을 저감시킬 수 있으며 이는 궤도재료 전반의 내구성 확보 및 사용수명을 향상을 위해 중요한 요인인 것으로 분석되었다.

• 대한조선학회지
• /
• 제15권3호
• /
• pp.1-7
• /
• 1978

The dynamic pressures on the bottom of high speed small crafts are studied. Using the dynamic load factor the dynamic pressure can be replaced by equivalent static pressure. Assuming that (1) the system is undamped with a single degree of freedom and (2) the load is applied triangularly, we obtained the max, value of the dynamic load factor of 1.455. We believe that this method could provide a guide to the designer who has no data on the craft in the preliminary structural design stage.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권12호
• /
• pp.19-29
• /
• 2021

This study aims to measure financial inclusion and examine its impact on income inequality in a panel of 18 Asian countries over the period 1997-2017. Two alternative approaches for developing financial inclusion index are used: one approach following the methodology of Sarma (2008), while the other is the Dynamic Factor Model (DFM)-based index. The impact of individual indicators and index of financial inclusion on inequality in income is analyzed. The Generalized Method of Moment (GMM) approach is used for empirical analysis. The results indicate that micro-level financial inclusion has a weak negative and statistically significant impact on income inequality. Macro-level index and all individual indicators of financial inclusion do not affect income inequality in the selected sample of economies. The income inequality issues have different natures and cannot be fixed by financial inclusion only. It needs holistic structural reforms to enable fair distribution of income and make an equitable financial system. Financial inclusion is a relatively less important intervention tool regarding fixing the issue of income inequality. This is one of the first studies that used the DFM method for financial inclusion indices construction.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.44-50
• /
• 2003

If the accelerometers are used in measuring the response, the absolute values of the velocity and displacement are not usually obtainable because their initial values are not accounted for in the integration of the acceleration response. A new dynamic response conversion algorithm of both the time domain and the frequency domain is proposed for the problem in estimating the displacement data by defining the transformed responses. In this algorithm, the displacement response can be obtained from the measured acceleration records by integration without requiring the knowledge of the initial velocity and displacement information. The applicability of the technique is tested by an example problem using the real bridge's superstructure under several cases of moving load. In the response conversion procedure of the frequency domain, the identified response according to the frequency can be estimated by changing over the limits of integration. If the reliability of the identified responses is ensured, it is expected that the proposed method for estimating the impact factor can be useful in the bridge's dynamic test. This method can be useful in those practical cases when the direct measurement of the displacement is difficult as in the dynamic studies of huge structure.

• 한국방재학회 논문집
• /
• 제10권6호
• /
• pp.17-25
• /
• 2010

본 연구는 U-채널 세그멘탈 콘크리트 교량의 차량 충돌 안전성에 대한 연구를 수행하였다. U-채널 세그멘탈 콘크리트 교량은 추가 고정하중을 감소시키고, 측보가 방호벽 역할을 동시에 수행하는 교량이라는 장점을 가지고 있다. 그러나 측보의 파괴는 전체 교량의 붕괴로 이어질 수 있는 위험 요소를 가지고 있다. 따라서, U-채널 세그멘탈 콘크리트 교량 측보의 차량 충돌에 따른 거동분석 및 특성파악이 필요하다고 판단된다. 본 논문에서는 AASHTO LRFD 설계기준 (2007)의 정적 및 동적 차량 충돌해석 기준을 적용하여 U-채널 세그멘탈 콘크리트 교량의 충돌해석을 수행하였다. 정적차량충돌해석의 경우에는 AASHTO LRFD 설계기준 (2007)에서 제시하고 있는 등가정적하중 재하하여 해석을 수행하고, 동적차량충돌의 경우에는 AASHTO LRFD 설계기준 (2007)의 방호벽 충돌실험기준에 근거한 실제 차량을 모델링하여 충돌해석을 통한 안전성 검토를 수행하였다. 검토결과, AASHTO LRFD 설계기준 (2007)을 만족하는 정적 및 동적 충돌하중에 대해 U-채널 교량시스템은 안전성을 확보하고 있는 것으로 판단된다.

• 산경연구논집
• /
• 제9권3호
• /
• pp.69-79
• /
• 2018

Purpose - Competition among cities around the world are rapidly shifting from competition of production factors such as labor costs and quality of raw materials to competition between the consumption factors such as quality of life, settlement environment, culture, and place. The entry into the era of competition between consumption factors is not only attracting investment for strengthening city competitiveness, but also actively inducing urban image reconstruction and new image making. Therefore, various studies related to urban marketing are being carried out. The object of this study is to investigate the effect of city brand image on city brand recognition and city loyalty based on the questionnaire of external citizens about Changwon city. Research design, data, and methodology - The data were collected from 200 Seoul and Busan citizens. Reliability and exploratory factor analysis were conducted through the SPSS program, and confirmatory factor analysis and structural equation modeling were conducted by using the AMOS program. Results - As a result of the hypothesis test, six hypotheses were adopted among the nine hypotheses. In summary, pleasant image, dynamic image, and good administrative image have a significant positive impact on city brand recognition. The magnanimous image did not have a significant effect on city brand recognition. In the impact of city brand image on city loyalty, magnanimous image and good administrative image had significant positive impact on city loyalty. Pleasant images and dynamic images did not significantly affect city loyalty. In addition, city brand recognition positively influenced city loyalty. Conclusions - First, it is possible to say that there is an academic significance of this research in its contribution to regional revitalization by investigating mutual influences in urban aspect by combining place marketing with image, recognition, and loyalty. Secondly, kinetic images such as pleasant image and dynamic image have more influence on recognition, and static images such as magnanimous images have more influence on loyalty. So, further research will be necessary to establish theories. Finally, In order to increase city brand recognition and city loyalty to local city, efforts should be made to improve urban images such as pleasant image, magnanimous image, dynamic image, and good administrative image.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.643-660
• /
• 2013

In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.