• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.335-346
• /
• 2013

AASHTO LRFD 및 도로교한계상태설계기준에서는 신뢰도 기반 활하중 모델로부터 결정된 트럭하중과 차로하중을 동시에 재하하도록 하고 있으며, 트럭하중은 충격계수를 고려하되 차로하중은 충격계수를 적용하지 않도록 규정하고 있다. 본 연구에서는 중앙경간 230m, 400m 및 540m의 멀티케이블 강합성 사장교를 대상으로 트럭하중과 차로하중이 동시에 주행하는 경우에 대해 차량-교량 상호작용 해석을 수행하고 케이블과 보강거더의 충격계수를 평가하였다. 트럭하중은 6-자유도의 차량 모델을 사용하였으며, 차로하중은 일련의 1축 차량이 연행해서 주행하는 것으로 모사하였다. 교량의 감쇠비가 충격계수에 미치는 영향을 평가하였으며, 충격에 영향을 미치는 주요 인자인 노면조도와 주행속도를 해석변수로 고려하였다. 노면조도는 ISO 8608 규정에 근거하여 랜덤 생성하였으며, 차량-교량 상호작용해석 시 노면조도는 트럭하중에만 적용하였다. 한편, 사장교의 충격계수 평가를 위해 실무에서 사용되고 있는 영향선 기법에 의한 충격계수를 동적 상호작용 해석에 의한 결과와 비교하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.70-76
• /
• 2013

본 연구에서는 강거더 연속교에 대해 국내외 설계기준에 규정되어 있는 활하중으로 인한 충격계수를 실험을 통해 검증하였다. 대부분의 도로교의 설계기준에서는 도로교의 경우 충격계수를 약 0.3 정도의 값으로 규정하고 있으나, 연속교의 경우에는 명확한 규정 및 명시가 없는 상황이다. 그러므로 단순교에 적용되는 충격계수를 연속교에 동일하게 적용하는 것이 일반적이다. 이 연구에서는 현장실험을 통해 연속교의 충격계수가 단순교에 적용되는 경우와 같이 사용될 수 있는지를 검증하였다. 현장실험 결과 얻어진 충격계수는 2차선 교량에서 1대의 만재트럭이 통과했을 경우 가장 하중이 많이 작용한 거더에서 0.2 이내의 충격계수가 계측되었으며, 2개의 차선을 통시에 만재트럭이 통과한 경우 그 충격계수는 0.05 이내의 값을 얻었다.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.567-582
• /
• 2022

In the present study, a series of physical experiments and numerical simulations were conducted to investigate the effects of mode I and mixed-mode I/II cracks on the fracture modes and stability of roadway tunnel models. The experiments and simulations incorporated different inclination angle flaws under both static and dynamic loads. The quasi-static and dynamic testing were conducted by using an electro-hydraulic servo control device and drop weight impact system (DWIS), and the failure process was simulated by using rock failure process analysis (RFPA) and AUTODYN software. The stress intensity factor was also calculated to evaluate the stability of the flawed roadway tunnel models by using ABAQUS software. According to comparisons between the test and numerical results, it is observed that for flawed roadways with a single radical crack and inclination angle of 45°, the static and dynamic stability are the lowest relative to other angles of fractured rock masses. For mixed-mode I/II cracks in flawed roadway tunnel models under dynamic loading, a wing crack is produced and the pre-existing cracks increase the stress concentration factor in the right part of the specimen, but this factor will not be larger than the maximum principal stress region in the roadway tunnel models. Additionally, damage to the sidewalls will be involved in the flawed roadway tunnel models under static loads.

• 전산구조공학
• /
• 제10권4호
• /
• pp.337-347
• /
• 1997

통행차량에 의한 도로교의 동적응답은 차량이나 교량의 다양한 특성에 따라 변화하는 특성을 가지고 있다. 본 연구에서는 중차량의 통행에 의한 동적응답확대계수의 확률적인 특성을 해석적인 기법으로 분석하였다. 도로교 통행차량들 중에서 대표적인 중차량인 텐덤축트럭과 세미트레일러를 대상으로 하여 동적응답확대계수를 평가하고, 이들을 동적재하시험의 결과와 비교하여 해석기법의 타당성을 검토하였다. 차량형식, 총중량, 노면조도, 재하차량수, 재하위치 등에 따른 동적응답확대계수의 확률적 특성의 변화를 분석하고 현행 시방서 기준과 비교하였다.

• 유통과학연구
• /
• 제19권5호
• /
• pp.5-12
• /
• 2021

Purpose: Research on supply chain sustainability is important for exporters When the factor of sustainable development is considered by the businesses as well as governments of all countries. Research on supply chain sustainability is important for exporters. Sustainable supply chain management and supply chain dynamics will help enterprises adapt to changes in the business environment. This study analyzes the impact of sustainable supply chain management, and supply chain dynamic capabilities on the sustainable development of exporting enterprises in Vietnam. Research design, data, and methodology: The research model and survey are designed based on previous studies after surveying export enterprises. With 185 samples collected from export enterprises. The Structural Equation Modeling (SEM) analysis technique is used. Data analysis is performed on SPSS and AMOS software (Reliability test, Confirmatory Factor Analysis, SEM). Results: Sustainable supply chain management and supply chain dynamic capabilities all have positive effects on the sustainable development of businesses (sustainable development is measured by distribution: measuring economic efficiency, social efficiency, and environmental performance). Conclusions: From the results of this study, the authors also made several recommendations to help export enterprises develop sustainability based on sustainable supply chain management and supply chain dynamic capabilities.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.31-37
• /
• 2018

이 논문은 압축강도 수준(100, 140, 180 MPa급)에 따른 HPFRCC의 동적충격 인장강도를 평가하였다. 먼저 100, 140, 180 MPa급 HPFRCC의 압축응력-변형률 관계를 분석한 결과 압축강도는 각각 112, 150, 202 MPa로 나타났으며, 압축강도가 높아짐에 따라 탄성계수도 증가하는 경향을 나타내었다. 100, 140, 180 MPa급 HPFRCC의 정적 인장강도는 각각 10.7, 11.5, 16.5 MPa로 나타났으며, 압축강도가 높아질수록 인장강도도 증가하는 경향을 나타내었다. 반면 100 및 140 MPa급 HPFRCC에서의 인장강도 및 에너지 흡수능력은 압축강도 수준에 따라 큰 차이를 보이지 않았다. 이는 시험체의 규격 및 강섬유의 배열에 영향을 받은 것으로 판단된다. HPFRCC의 동적충격 인장강도를 평가한 결과, 변형률 속도가 10-1/s에서 150/s로 증가할수록 모든 HPFRCC의 인장강도와 동적증가계수는 증가하는 경향을 보였다. 한편 동일한 범위의 변형률 속도에서 HPFRCC의 압축강도가 낮을수록 인장강도에 대한 DIF가 높게 측정되어 효율적인 측면에서는 100 MPa급 HPFRCC가 가장 우수한 것으로 나타났다. 따라서 높은 수준의 인장성능이 요구되는 경우 높은 압축강도를 가지는 HPFRCC를 사용하는 것이 유리하며, 폭발과 같은 고속변형률 속도에서 보다 효율적인 접근을 위해서는 목표 압축강도에 근접한 HPFRCC를 사용하는 것이 바람직한 것으로 판단된다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권10호
• /
• pp.109-117
• /
• 2021

This study investigates the effects of FDI and other macroeconomic variables on Total Factor Productivity (TFP) in selected ASEAN+3 countries from 1981 till 2016. Total Factor Productivity (TFP) for each ASEAN+3 country was constructed using the Malmquist productivity index method. Then, a panel ARDL framework (dynamic heterogeneous panel), namely Pooled Mean Group (PMG), Mean Group (MG), and Dynamic Fixed Effect (DFE) are employed in examining the effects of FDI and other controlling variables on TFP. The new findings show that FDI has a significant and positive impact on TFP in the long run and the short run in ASEAN+3 countries. Besides, the results also reveal that in the long run, other variables such as the average number of years of schooling and the ratio of high-skilled to low-skilled labor also have a significant and positive effect on TFP. However, economic openness, government expenditure on R&D, and interaction between countries and FDI have a negative and significant impact on TFP. These findings implied that the recipient countries must ensure their political stability and offer various incentives to attract more investors. Furthermore, the influx of foreign investors, especially large ones and lower costs, should be encouraged by each country as FDI inflows can boost their TFP growth.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.245-255
• /
• 2019

In this paper, an inverted-pendulum model consisting of a point supported by spring limbs with roller feet is adopted to simulate human walking load. To establish the kinematic motion of first and second single and double support phases, the Lagrangian variation method was used. Given a set of model parameters, desired walking speed and initial states, the Newmark-${\beta}$ method was used to solve the above kinematic motion for studying the effects of roller radius, stiffness, impact angle, walking speed, and step length on the ground reaction force, energy transfer, and height of center of mass transfer. The numerical simulation results show that the inverted-pendulum model for walking is conservative as there is no change in total energy and the duration time of double support phase is 50-70% of total time. Based on the numerical analysis, a dynamic load factor ${\alpha}_{wi}$ is proposed for the traditional walking load model.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1582-1589
• /
• 2004

The dynamic response of an eccentric Griffith crack in functionally graded piezoelectric ceramic strip under anti-plane shear impact loading is ana lysed using integral transform method. Laplace transform and Fourier transform are used to reduce the problem to two pairs of dual integral equations, which are then expressed to Fredholm integral equations of the second kind. We assume that the properties of the functionally graded piezoelectric material vary continuously along the thickness. The impermeable crack boundary condition is adopted. Numerical values on the dynamic stress intensity factors are presented for the functionally graded piezoelectric material to show the dependence of the gradient of material properties and electric loadings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.185-190
• /
• 2001

The structure borne noise of the air-conditioner, which degrades the noise quality, is hardly reduced by the general noise treatments. It can be effectively reduced by eliminating the structural vibration which the noise originates from. The rubber vibration isolator prevents the dynamic force induced by the fan driving motor from exciting the chassis structure, which finally reduces the structure borne noise. The dynamic properties of the vibration isolation system such as the natural frequency of the vibration isolation and loss factor of the rubber isolator, need to be experimentally evaluated. In this paper, these dynamic properties were obtained by the resonant method using the impact hammer for 3 types of the isolator specimens. It is known that the isolation natural frequency of the axial direction of the rubber isolator is two times higher than that of the radial direction, and is proportional to the hardness of the rubber specimen.