• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.558-567
• /
• 2003

The catenary wires are damaged by periodic running of train as well as repeated stress. The wires are also degraded by atmosphere corrosion at fields. Corrosion of wires increased surface roughness and deteriorated mechanical properties by providing fatigue crack initiation sited resulting in a bad effect on service life of the wires. Fatigue test of catenary wires performed to estimate service lifetime. Also, simulation to analyze stress on catenary wires was conducted through modelling the finite elements for dynamic behaviors of wires. Fatigue life of catenary wires was estimated with fatigue and simulation tests.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1109-1114
• /
• 2005

The rolling contact fatigue of wheels for high speed trains is a matter of increasing importance. The wheel damages from fatigue crack makes noise up and safety down. RCF-casued accidents cause traffic congestion and economical costs as well as personal injuries. In this study, we examine the rolling contact fatigue of wheels for power car running at 300km/h. Using the results of multi-body dynamic analysis and the proposed procedure of Ekberg, we calculate the fatigue index of surface-initiated fatigue, subsurface-initiated fatigue and fatigue initiated at deep material defects. As a result. the fatigue index shows us whether fatigue will appear and in which form. In addition, we present Shakedown map on surface-initiated fatigue.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.32-37
• /
• 2003

Evaluation of fatigue strength on the spot welded part is very important for strength design of spot welded steel structures. In this paper, we could get the life cycle of the spot welded part using the lethargy coefficient obtained through the quasi-static tensile shear test for the specimen welded by current 10kA. The reliability evaluation of the life cycle is completed by comparing the life cycle calculated under the constant loading rate with the life cycle obtained by dynamic fatigue test. And then the result calculated by the lethargy coefficient is verified through the lift cycle calculated using the dynamic final tensile stress formula under the increased loading speed. This way can make save the time and cost in processing of predicting the life cycle of a structure.

• Proceedings of the KSR Conference
• /
• 2003.10a
• /
• pp.187-191
• /
• 2003

Aluminum carbody for rolling stocks is light and perfectly recycled, but includes severe defects which are very dangerous to fatigue strength. Static load test has been performed up to date to assess structural safety of the carbody. However, static load test is not sufficient to evaluate fatigue strength of the carbody, because fatigue failure is caused by dynamic load. In this study, the established load test methods for carbody are described and the characteristics of the methods are discussed. Also, a testing method to simulate dynamic loading condition is proposed for evaluation of fatigue strength of the carbody The results by the proposed testing method are compared with the results by the static load test and new findings are discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.94-100
• /
• 2004

A dynamic finite element analysis of a rig test model for truck chassis systems is conducted to establish an appropriate model designed to predict the fatigue life. A reference Belgian road input, which has been obtained from a field test, is imposed on the finite element model in the modal finite element analysis, and the resulting strain history is employed for the prediction of the fatigue life. This is compared with the prediction based upon the strain history measured in the field test. The two agree with each other within the limitation of the field data and the input data to the model. The high frequency responses over 50 Hz are confirmed to be negligible as far as their effect on the fatigue life is concerned.

• Tribology and Lubricants
• /
• v.13 no.3
• /
• pp.48-55
• /
• 1997

The ball bearing with thin-section raceways which is much lighter than other conventional bearings used in most modem passenger cars and small tracks. The important design parameters of this bearing is the groove radius of raceways, the diametral clearance, the free contact angle and so on. The optimal value of these parameters were determined by considering the dynamic load capacity, the contact angle and the calculated fatigue life. The contact angle between a ball and raceways was calculated by considering the local contact deformation and the structural deformation of thin-section raceways which was estimated by FEM. The raceways were made by means of the press-forming process. The fatigue life tester was designed and manufactured. The fatigue life test was executed and the reliability of this bearing was confirmed.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.3
• /
• pp.140-145
• /
• 2017

Objective: The purpose of this study was to investigate the effect of visual block with ankle joint fatigue on gait and dynamic balance ability. Design: Cross-sectional study. Methods: Thirty healthy young adults (men=15, women=15) between 22 to 25 years of age voluntarily participated in this study. All subjects performed the gait and dynamic balance test successively in two conditions: the visual block and the open eyes condition. Before the gait and dynamic balance test, muscle fatigue on the ankle joint was induced to all subjects by doing ankle dorsiflexion and plantarflexion alternately, and then gait parameters (step length, stride length, cadence, velocity, single limb support, and double limb support) were assessed by walking on the GAITRite system (CIR Systems Inc., USA). Subjects also performed the functional reach test (FRT) for assessment of dynamic balance. This study examined gait parameters and FRT scores in each visual block and open eyes condition. Results: The results showed that FRT scores with the visual block condition significantly decreased compared to without visual blocking (p<0.01). Step length, stride length, cadence, and velocity of gait parameters decreased significantly in the visual block condition (p<0.01) while there was no significant difference for single limb support. However, double limb support increased significantly in the visual block system (p<0.01). Conclusions: Therefore, blocking of visual information with muscle fatigue of the ankle joint can affect gait and balance ability of young adults and increase the risk of falls.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.433-439
• /
• 2022

Muscle fatigue models to predict maximum endurance time (MET) are broadly classified as either 'empirical' or 'theoretical'. Empirical models are based on fitting experimental data and theoretical models on mathematical representations of physiological process. This paper examines the effectiveness of dynamic muscle fatigue model as theoretical model to predict maximum endurance time during forearm isometric contraction. Forty volunteers (20 females, 20 males) are participated in this study. Empirical models (exponential model and power model) and theoretical model (dynamic muscle fatigue model) are used to compare. Mean absolute deviation (MAD), correlation coefficient (r) and intraclass correlation (ICC) are calculated between theoretical model and empirical models. MAD are below 3.5%p, r and ICC are above 0.93 and 0.87, respectively. This results demonstrate that dynamic muscle fatigue model as theoretical model is valid to predict MET.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1467-1474
• /
• 2004

In this study, a new damage identification method for beam-like structures with a fatigue crack is proposed. which does not require comparative measurement on an intact structure but require several measurements at different level of excitation forces on the cracked structure. The idea comes from the fact that dynamic behavior of a structure with a fatigue crack changes with the level of the excitation force. The 2$^{nd}$ spatial derivatives of frequency response functions along the longitudinal direction of a beam are used as the sensitive indicator of crack existence. Then, weighting function is employed in the averaging process in frequency domain to account for the modal participation of the differences between the dynamic behavior of a beam with a fatigue crack at the low excitation and one at the high excitation. Subsequently, a damage index is defined such that the location and level of the crack may be identified. It is shown from the analysis of vibration measurements in this study that comparison of frequency response characteristics of a beam with a single fatigue crack at different level of excitation forces enables an effective detection of the crack.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.114-119
• /
• 2004

Endbeam is an important structural member of freight bogie for the support of service loading. In general, more than 25 years' durability is necessary. However, endbeam occur fatigue fracture in dynamic stress concentration location because comparatively strength and stiffness are low. Therefore, structure analysis is performed to evaluate structural problem of endbeam and local strain range as durability analysis. The number of cycles is extracted concerning the bogie in operation by measurement dynamic stress time history on critical part which is crack initiation in actual fact. At this time rainflow cycle counting is used to consider change of stress for operating condition. Based on the fatigue life curves and the stress analysis, the fatigue life of the endbeam is predicted and compared with the experimentally determined fatigue life, resulting in a fairly good correlation.