• 한국안전학회지
• /
• 제7권2호
• /
• pp.71-79
• /
• 1992

This paper presents a least-square algorithms of lattice structures and their use for adaptive prediction of time series generated from the dynamic system. As the view point of adaptive prediction, a new method of Identification of dynamic characteristics by means of estimating the parameters of linear auto regressive model is proposed. The fast convergence of adaptive lattice algorithms is seen to be due to the orthogonalization and decoupling properties of the lattice. The superiority of the least-square lattice is verified by computer simulation, then predictor coefficients are computed from the linear sequential time data. For the application to the dynamic characteristic analysis of unknown system, the transfer function of ideal system represented in frquency domain and the estimated one obtained by predicted coefficients are compared. Using the proposed method, the damping ratio and the natural frequency of a dynamic structure subjected to random excitations can be estimated. It is expected that this method will be widely applicable to other technical dynamic problem in which estimation of damping ratio and fundamental vibration modes are required.

• Structural Engineering and Mechanics
• /
• 제38권3호
• /
• pp.349-359
• /
• 2011

Input excitation and output response of structure are needed in conventional modal analysis methods. However, input excitation is often difficult to be obtained in the dynamic load test of bridge structures. Therefore, what attracts engineers' attention is how to get dynamic parameters from the output response. In this paper, a structural experimental modal analysis method is introduced, which can be used to conveniently obtain dynamic parameters of the structure from the free decay response. With known damping coefficients, this analysis method can be used to identify the natural frequencies and the mode shapes of MDOF structures. Based on the modal analysis theory, the mathematical relationship of damping ratio and frequency is obtained. By using this mathematical relationship to improve the previous method, an improved experimental modal analysis method is proposed in this paper. This improved method can overcome the deficiencies of the previous method, which can not identify damping ratios and requires damping coefficients in advance. Additionally, this improved method can also identify the natural frequencies, mode shapes and damping ratios of the bridge only from the free decay response, and ensure the stability of identification process by using modern mathematical means. Finally, the feasibility and effectiveness of this method are demonstrated by a numerical example of a simply supported reinforced concrete beam.

• 한국해양공학회지
• /
• 제30권1호
• /
• pp.25-31
• /
• 2016

In this study, hydrodynamic coefficients were obtained from a Rotating Arm (RA) test, which is one of the captive model tests used to provide accurate coefficients in the control motion equation of an underwater vehicle. The RA test was carried out at the RA facility of ADD (Agency for Defense Development), and the forces and moments acting on the underwater vehicle were measured using a six-axis waterproof gage. A multiple regression analysis was used in the analysis of the measured data. The experimental results were also verified by comparison with the theoretical values of the previous linear coefficients. In addition, the stability indices in the horizontal plane were calculated using the linear and nonlinear coefficients, and the dynamic stability of the underwater vehicle was estimated to have a good dynamic performance with a depth ratio of 6.0.

• 항공우주기술
• /
• 제11권1호
• /
• pp.98-102
• /
• 2012

비냉각형 열상 시스템에 대한 관심이 국방 및 항공우주 분야에서 증가하고 있다. 특히, 국방분야 무기체계에서는 무인화 및 주야간 적군 탐지를 위한 요소기술로 활용되고 있다. 비냉각형 열상 시스템의 연구 분야 중 저비용, 저전력, 소형화를 위한 비냉각형 TEC(Thermal Electric Cooler)-less 열상 시스템에 대한 연구가 활발히 진행되고 있다. 그러나 TEC-less로 운영하기 위해서는 최적화된 불균일보정 계수의 추출 및 적용이 요구된다. 본 논문에서는 TEC-less로 최적화 된 보정 계수 획득 방법으로 선형 보간법을 이용한 보정 계수 추정 방법인 DCCE-LI(Dynamic Calibration Coefficient Estimation with Linear Interpolation)을 제안하고, 실험을 통해 제안 기법이 기존의 정적 보정 계수를 적용한 것에 비해 IR 영상 품질이 우수하고, 실시간 보정 계수 추정이 가능함을 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.623-628
• /
• 2000

Since the influence coefficients method in balancing of rotors is developed with the basement of not the principle of rotor system dynamics, but the linear relationshop of between the measuring quantities and the unbalance quantities, field engineers can apply the method without additional understanding on the rotor dynamics. But the influence coefficients method is not robust to the measurement error. This paper proposes a new method for the two plane balancing of rigid rotor, based on the principle of rotor dynamics. And the kit for experiment is made by ourselves, and in order to measure in the same condition with it, we do a experiment three times. And then with the Response of gap sensor, the SNR(Signal and Noise) is compared and analyzed about measuring error between the influence coefficient method, and the new method, and it is proved that the new method is less robust than the influence coefficient method.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.267-272
• /
• 2003

This paper presents a performance analysis model of corrugated bump foil bearings. The analyses for not only 1st generation bump foil journal bearings but also bump foil thrust bearings are performed. Static performances such as load capacity, attitude angle, pressure distribution, foil deflection, and film thickness are accurately estimated by using soft elasto-hydrodynamic analysis technique and finite difference numerical method. Also dynamic performances such as stiffness coefficients and damping coefficients are estimated by perturbation method. The analysis technique may be appliable to rotordynamic analysis, stability analysis, and optimized bearing design.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.23-33
• /
• 2009

The inherent aeromechanical complexity of a rotor system necessitated the comprehensive analysis code for helicopter rotor system. In the present study, an aerodynamic analysis module has been developed as a part of rotorcraft comprehensive program. Aerodynamic analysis module is largely classified into airload calculation routine and inflow analysis routine. For airload calculation, quasi-steady analysis model is employed based on the blade element method with the correction of unsteady aerodynamic effects. In order to take unsteady effects - body motion effects and dynamic stall - into account, aerodynamic coefficients are corrected by considering Leishman-Beddoes's unsteady model. Various inflow models and vortex wake models are implemented in the aerodynamic module to consider wake induced inflow. Specifically, linear inflow, dynamic inflow, prescribed wake and free wake model are integrated into the present module. The aerodynamic characteristics of each method are compared and validated against available experimental data such as Elliot's induced inflow distribution and sectional normal force coefficients of AH-1G. In order to validate unsteady aerodynamic model, 2-D unsteady model for NACA0012 airfoil is validated against aerodynamic coefficients of McAlister's experimental data.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.830-837
• /
• 2004

In this paper, the flow properties of staggered labyrinth seals are investigated. Leakage flowrates and pressure distributions are calculated for this seal. Then the dynamic stiffness and damping coefficients are calculated. The results are compared to the results of the some other papers.

• Communications for Statistical Applications and Methods
• /
• 제3권1호
• /
• pp.207-217
• /
• 1996

The problem of detecting change with independent data is considered. The asymptotic distribution of the sample change process with the sample Fourier coefficients is shown as a Brownian Bridge process. We suggest to use dynamic statistics such as a sample Brownian Bridge and graphs as statistical animation. Graphs including change PP plots are given by way of illustration with the simulated data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.290-291
• /
• 2008

The most popular speech feature used in speech recognition today is the Mel-Frequency Cepstral Coefficients (MFCC) algorithm, which could reflect the perception characteristics of the human ear more accurately than other parameters. This paper adopts MFCC and its first order difference, which could reflect the dynamic character of speech signal, as synthetical parametric representation. Furthermore, we quote Dynamic Time Warping (DTW) algorithm to search match paths in the pattern recognition process. We use the software "GoldWave" to record English digitals in the lab environments and the simulation results indicate the algorithm has higher recognition accuracy than others using LPCC, etc. as character parameters in the experiment for Digital Isolated Word Recognition (DIWR) system.