• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.129-136
• /
• 2005

The vehicle loading test under the strict traffic control is generally carried out as a present practice in an evaluation process of the bearing capacity of a bridge. The quasi-static load test is recently proposed to mitigate the traffic condition of test, and analyze the disturbed acceleration time-history data of free vibration due to the ambient traffic on the bridge by Fourier transform to calculate only the natural frequencies of the bridge. The calculated frequencies have some errors due to the analysis technique as well as the influence of ambient traffic loads, and in addition to it is cumbersome to obtain the free vibration data during a quasi-static load test. In this study, the wavelet transform technique using Morlet wavelet is used to analyze the acceleration data recorded during a quasi-static load test on a bridge and calculate the natural frequencies and the modal damping ratios of the bridge. The study results show that the wavelet transform technique is a reliable and reasonable method to analyze test data and obtain the natural frequencies and the modal damping ratios of a bridge regardless of the data types i.e. free or forced vibrations.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.171-190
• /
• 2014

A short consumption cycle caused by the technological development and the diversification of customer lead to both the dynamic growth of the industry and the waste recycling issue at the same time. Including Korea, the situation is particularly worrisome in some countries, such as India and China, where acute environmental hazards have resulted from a combination of a lack of recycling centers' capacity and the domination of a large backyard recycling sector. A study about to maximize the current recycling center efficiency with minimal changes is required. In this study, we suggest the optimal location selection method for the recycling center based on the well-known reverse logistics cost minimization model. An actual recycling data about a specific electronic equipment and region in Korea are used for the verification of the method suggested.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.667-672
• /
• 2011

The purpose of this work is to present the experiment results by a dynamic adsorption of water vapor on pelletized zeolites (ADZ300, ADZ400, and ADZ500) in fixed bed. The breakthrough curves of water vapor with several different concentrations and temperature in the range of 25~45 $^{\circ}C$ on zeolite bed were investigated. In the same conditions, the breakthrough time on ADZ400 and ADZ500 were little longer than ADZ300, and the equilibrium adsorption capacity on ADZ500 was highest. The higher the concentration of water vapor was, the faster the breakthrough time was, and the slope of breakthrough curves showed a tendency to increase. The faster the flow rate of water vapor was, the faster the breakthrough time was relatively, but variations between flow rate and breakthrough time did not have a proportional relationship. The breakthrough curve maintained constant gradient in spite of variation of flow rate in the same concentration. The temperature rise in zeolite bed by adsorption heat was occurred in the early stage of adsorption. After water molecule layers were formed on the surface of zeolite, the temperature was slowly cooled by water vapors continuously flowed in as constant temperature. The greater the concentration of water vapor and adsorption temperature were, the temperature difference in zeolite bed was increased.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.57-66
• /
• 2011

For the lateral load resistance of a RC frame in a medium risk seismic zone, the strength of lower story beams and columns should be larger than those of the upper stories. However, the lateral loads can be accommodated by redistributing design beam moments vertically as well as horizontally so all beams end up with identical strengths. This paper looks at the impact of the vertical redistribution of beam moments to provide identical beam strength over as many floors as possible. Two-bay six-story RC frame was designed with and without vertical beam moment redistribution and its seismic performance were evaluated by using push-over limit analysis and by non-linear time history dynamic analysis. Analytical results show that with the use of vertical beam moment redistribution the increase in the ductility demand is similar to the proportion of moment redistribution applied, but this additional demand is below the ductility capacity of well detailed RC members.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.267-275
• /
• 2012

This paper describes the experimental study on the structural behavior of the joint plane between a RC(Reinforced Concrete) wall and a SC(Steel Plate Concrete) wall under out-of plane flexural loads and in-plane shear loads. The test specimens were produced with L and I shape to assess efficiently flexural and shear behavior of the structures. In order to consider dynamic loads such as earthquake, cyclic loading tests were carried out. As results of the out-of plane flexural tests, ductile failure mode of vertical bars was shown under a push load and the failure load was more than nominal strength of the specimen. And the latter test was performed to verify the variation which was composition presence of horizontal bars in the SC member. The test results showed that capacity of the specimens was more than their nominal strength regardless of composition presence of horizontal bars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4C
• /
• pp.127-136
• /
• 2011

The settlement of a compaction plate resting on the surface of rubble-mound and subjected to a vibrating vertical load can be characterized by a transient amplitude and a plastic settlement. As long as the maximum imposed load does not exceed the bearing capacity of the rubble-mound, plastic settlement will approach an ultimate value and essentially steady-state vibration will ensue. For the settlement behavior by vibro-compaction, most laboratory experiments were conducted on laterally confined samples with loads over the full surface area or on samples placed on a vibrating table. In the field, the loads cover only a small fraction of the surface area. In this study, crushed stones are loaded with the same as field condition. According to the vibro-compaction experiments on crushed stone, it was found that approximately 90% of total settlement occur within 2 minutes and plastic settlement increases with increasing cyclic stress levels including static and dynamic stress. A compaction equation on which the number of load cycles, amplitude of plate, settlement, width of plate, and cyclic stress are related each other is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.70-80
• /
• 2001

A cycloid reducer is one of the rotational velocity reduction equipments of machinery. It has advantages of the higher reduction ratio, the higher accuracy, the easier adjustment of transmission ratio and the smaller workspace than other kinds of reducer. A cycloidal plate gear is a main part of the cycloid reducer. Its tooth shape is peculiar because of gearing with the roller gear that has the several rollers on the circular line. And then it can be designed to contact all teeth to rollers. So, the cycloid reducer has the good characteristics in the dynamic properties and the zero-backlash in the contact motion. It can be used in robots, high-precision machines and high capacity machinery. This paper proposes a new approach for the shape design of the cycloidal plate gear and presents a Computer-Aided-Design program developed by the proposed method. The first part of this paper defines the two types of the cycloid reducers and explains their mechanisms. The second part defines the instant velocity centers for each type of the cycloid reducers and calculates the contact angles and the contact points by using te geometric relationships and the kinematical properties of the reducers. The third part generates the full shape of the cycloidal plate gear by the coordinate transformation technique. Finally, this paper presents two examples for the shape design of the cycloidal plate gear in order to prove the theory of the proposed method in this paper and the accuracy of the \"CycloGear Designer\".

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.309-319
• /
• 2003

The main purpose of this paper is to present a simulation model for assessing the impacts of a variable speed wind turbine (VSWT) on the distribution network and perform a simulation analysis of volt-age profiles and harmonics along the wind turbine installed feeder using the presented model. The modeled wind energy conversion system consists of a fixed pitch wind turbine and a permanent-magnet synchronous generator, in which a controllable power electronics inverter performs variable speed operation and reactive power output control. Impact analysis on voltage profiles and harmonics of a VSWT-installed distribution feeder is addressed and simulated in terms of steady state and dynamic behaviors. Various capacities and different modes of variable speed wind turbines are simulated and investigated. Case studies demonstrate how feeder voltages are influenced by capacity and control modes of wind turbines and changes in wind speed under various network conditions, and show harmonic impacts on the feeder. Modeling and simulation analysis is based on PSCAD/EMTDC a software package.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.4
• /
• pp.549-558
• /
• 2013

PURPOSE: This study is designed as a retrospective study, and identified the clinical usability of Sit to Stand (STS) test for predicting of fall incidence in stroke patients who experienced a fall within 1 year. METHODS: Between July 2011 and November 2012, 69 inpatients with stroke in K rehabilitation hospital were participated under voluntarily signing the informed consent form. STS test and 10m walk test (10MWT) were used to assess the muscle strength of lower-extremity and walking velocity, respectively. Also, we tested dynamic balance and motor function of lower-extremity in affected-side using with the Berg balance scale (BBS) and the Fugl-Meyer assessment of lower extremity (FM-L/E). METHODS: There were significant differences between subjects with fall-experienced group and without subjects without fall-experienced group in STS test, 10MWT, BBS scores and FM-L/E. STS test significantly showed a negative correlation between 10MWT (r=-.657), BBS (r=-.512), and FM-L/E (r=-.563). And, 10MWT have a influence on the performance of STS test (the capacity of explanation = 20%). The cut-off value of STS performance predicting falls experience is ${\geq}14.36$ seconds (sensitivity=76%; specificity=79%, area under curve=.785). According to logistic regression analysis of falls experience, subjects ${\geq}14.36$ s showed that 4.164 times (odd ratio) increased in falls than subjects < 14.36 s in STS test. CONCLUSION: This study demonstrated that STS test may be a useful tool predicting and measuring falls in patients with stroke. Further study will be needed to elucidate the kinematic analysis of STS test and the relationship between physical activity level and falls in stroke patients.

• Korean Journal of Cognitive Science
• /
• v.22 no.2
• /
• pp.193-215
• /
• 2011

The purpose of this study was to examine the working memory that is related with reading. For this purpose, the third and fourth grade children with reading difficulty were compared with normal children. The gender comparison and the correlations among the three components of working memory were also examined. The results indicated that the reading difficulty group were outperformed by the normal group in every test. Gender difference was found only in visuospatial capacity. There was an interaction between reading and gender in the memory of dynamic mazes. In the whole group, every correlation among all components was significant. When the correlations were examined separately in each group, however, only one correlation was significant in both groups. When the influence of the central executive was controlled, the interrelationship between phonological working memory and visuospatial working memory was mitigated. This study suggests that when teaching children with reading difficulty instructional material should be succinct and visuospatial information needs to be used for boys if possible.