• 패션비즈니스
• /
• 제21권1호
• /
• pp.166-176
• /
• 2017

This study is fundamental research on how to be able to scientifically quantify and reproduce a natural dyeing procedure. By dyeing silk fabrics, the establishment of a reproducible dyeing method was sought. Juglans mandshurica has been known as one of the most widely used black vegetable dyes. Repetition conditions and combination dyeing were performed with Juglans mandshurica cortex, gallnut, clove, and Eclipta prostrata L. extracts to express a deep black color. Juglans mandshurica cortex, gallnut, clove, and Eclipta prostrata L. extracts were suitable for black coloration and showed a darker black color when combined with iron mordant. Specifically, Juglans mandshurica cortex and clove can be used for deep black coloring. Color fastness when washed or dry cleaned was found to be strong with a grade of 4-5 and fastness to light was rated at a 3-4. The grade of color change when exposed to rubbing and perspiration was good at a 4-5. In regards to functional property aspects, it showed excellent results with a 99% deodorization rate at 120 minutes of dyeing time, 97.1% UV protection rate, and 85.9% and 62.3% bacterial reduction against Staphylococcus aureus and Streptococcus pneumoniae, respectively. Therefore, it is considered that the extract from the Juglans mandshurica cortex is of great value as an eco-friendly, natural dyestuff.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.36-42
• /
• 2020

Fenton process is one of the most effective advanced oxidation processes for the removal of pollutants from wastewater. In this study, while ferrous iron was used in conventional Fenton process (CFP); nano-sized iron(II, III) oxide was experienced in modified Fenton process (MFP) as a new catalyst alternative. In order to enhance their oxidation efficiencies, both CFP and MFP were combined with ultrasonication at 53 kHz fixed frequency. Thus, the influences of both catalyst iron species and ultrasonication on color and chemical oxygen demand (COD) removals from synthetic textile wastewater including Maxilon Red GRL 200% dyestuff were investigated experimentally. While the COD and color removal rates were found as 72.5% and 69.7% via CFP; they were 87% and 75.8% by ultrasonicated CFP, respectively. The color and COD removals were 40.6% and 64.8% via MFP, and 49.9 and 73.1% by ultrasonicated MFP, respectively. Therefore, it was found that the simultaneously usage of ultrasonication with CFP and MFP was improved the COD and color removal efficiencies and oxidation rates even at lower H₂O₂ dosages, compared to individual CFP and MFP. Moreover, the color and COD removal kinetics were also modelled mathematically and compared in the study.

• 한국의류학회지
• /
• 제8권3호
• /
• pp.1-7
• /
• 1984

Traditionally dyeing fabrics with pigment extracted from carthamus flower was a popular method of obtaining red color in Korea. Such a method existed in several countries throughout the world before the synthetic dyestuff was developed. However, the traditional procedures of using natural products in obtaining colored materials are completely forgotten in modern Korea. The details of dyeing procedures fare not well documented in literature, either. In this study the method of extracting and dyeing with carthamus flower is reconstructed from Korean literature and actually carried out in laboratorf. The reconstructed method is compared with those of Japan, China, France, and Egypt, and the scientific basis of such an ancient tradition is discussed. Carthamus contains two kinds of coloring components : yellow carthamin and red carthamone. Water-soluble carthamin is first extracted by repeated washing and is usually used for the initial soaking procedure. Then carthamone is extracted in alkali solution by adding ashes of dried plants such as carthamus stalks and bean hull. Finally the solution of carthamone is made acidic by adding schizandra juice for dyeing on fabrics.

• 한국의류학회지
• /
• 제18권3호
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.32-42
• /
• 1995

In order to reduce the amount of waste water generated from textile dyeing process and processing water, cotton fabric was bleached with ozone in ozone/water contact system, and dyed. The results obtained from the measurement of whiteness, reflectance, tensile strength, color difference, and K/S value of treated samples were as follow : 1) In ozone bleaching, factors affect whiteness most are treatment time and ozone dosage. As treatment time is lengthened, whiteness increases. Futhermore, bleaching effect is high in acidic treatment, but low in alkaline treatment. 2) As bleaching goes on, maximum absorption wave length shifts to shoter wavelengths. 3) As treatment time is lengthened or pH of treatment is low, tensile strenth of treated fabric decrease. 4) In all cases, color difference of dyed cotton fabrics in above 2% o.w.f. dyestuff concentration don't go beyond 1∼2 AN unit, compared with standard.

• 대한가정학회지
• /
• 제43권7호
• /
• pp.109-116
• /
• 2005

Using buffer solutions, consisting of pH 4, 5, 6, 7, and 8, silk fiber fabric specimens, pre-mordanted with one of the mordanting agents, Sn, Al, Cu, Cr, and Fe, were dyed using cochineal dyestuff. The color of the dyed silk fabric specimens was predominantly red(R) for the acidic range of pH 4 and 5, and predominantly purple(RP) for the neutral range of pH 6,7, with 8, with the pH boundary differentiating between the shades being between pH 5 and 6. As a general trend, the chroma value decreased as the pH changed from acid to alkali, and the highest chroma value us attained between pH 4 and 5. Regardless of the mordanting conditions, the trend was that $ {\Delta}E$ showed the highest measured value in the acidic range of pH 4 and 5, and it dropped abruptly after the pH 6.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2008

The study has attempted to introduce a new coating than the conventional standardized method of spray, padding and roll coating. The study has focused on finding condition for separating water and organic layer in marble bath and surface effects according to kind of raw hide. It was found that dyestuff-free was to be used in water layer and the input amount of initial insoluble pigment to be added in marble bath should be adjusted following the change of surface area of the marble bath in order to get efficient marble effect while preventing coagulation of water and organic layers. Eventually, amorphous high value-added leather could be obtained treated in process other than the conventional standardized method. Even raw hides of low grades($C{\sim}E$ grades) could be processed into amorphous marble effect that could conceal or shield surface scratches by the colorant, which eventually eliminated necessity of using excessive amount of chemicals in the coating process leading to achieving high quality marble leather of natural look.

• 패션비즈니스
• /
• 제10권2호
• /
• pp.27-39
• /
• 2006

In this study, physical/chemical characteristics of the fabrics dyed using Japanese pagoda tree which is a yellowish dyestuff was investigated. We tried to estimate the dyeing mechanism among fiber macromolecules, mordants, chitosan, and dyestuffs by measuring the change of air-permeability according to the dyeing process. Also wash fastness and light fastness were measured in order to estimate the fastness according to the dyeing characteristics. When the chitosan pre-treatment was introduced, the wash fastness increased significantly in the cotton fabrics while the fastness did not change in the nylon fabrics significantly. The light fastness was not improved by the chitosan treatment. when the antibacterial activity was measured for the dyed cotton fabrics, Japanese pagoda tree itself did not exhibit antibacterial activity. However, chitosan treated dyed fabrics exhibited low antimicrobial activity.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.199-203
• /
• 2012

A modified sol-gel method and $N_2$-plasma treatment were used to prepare bulk and surface doped N-$TiO_2$, respectively. XRD, TEM, UV-vis spectroscopy, $N_2$ adsorption, Elemental Analyzer, Photoluminescence, and XP spectra were used to characterize the prepared $TiO_2$ samples. The N doping did not change the phase composition and particle sizes of $TiO_2$ samples, but increased the visible light absorption. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activity of surface doped N-$TiO_2$ prepared by $N_2$-plasma was much higher than that of bulk doped N-$TiO_2$ prepared by sol-gel method. The possible mechanism for the photocatalysis was proposed.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1895-1899
• /
• 2012

$SiO_2$-coated $TiO_2$ composite materials with enhanced photocatalytic activity under UV light was prepared by a simple catalytic hydrolysis method. XRD, TEM, UV-vis spectroscopy, Photoluminescence, FT-IR and XP spectra were used to characterize the prepared samples. The obvious shell-core structure was shown for obtained $SiO_2$@$TiO_2$ sample. The average thickness of the $SiO_2$ coating layer was 2-3 nm. The interaction between $SiO_2$ and $TiO_2$ restrained the recombination of excited electrons and holes. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under UV light. The photocatalytic activity of $SiO_2$@$TiO_2$ was much higher than that of P25 and mechanical mixing sample $SiO_2/TiO_2$. The possible mechanism for the photocatalysis was proposed.