• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1995

In order to improve dyeability of poly(ethylene terephthalate)(PET) micro filament fabrics, the effect of the prior oxygen low temperature plasma on the subsequent dyeing(deep dyeing, printing) was examined in various conditions. The apparent concentration of dyed PET micro filament fabrics was increased by $O_{2}$plasma treatment. Higher discharge power levels and higher reactor pressure values created more significant effect. The wettability was significantly increased by $O_{2}$ plasma treatment. Therefore, it is predicted that introducing hydrophilic group on the surface of material can improve the apparent concentration of PET micro filament fabrics.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.14-21
• /
• 2009

In this article, silk fabric was treated with silver nitrate ($AgNO_3$) as oxidizing agent, with conditions such as concentration, and treating time, and subsequently treated with reducing agents such as sodium boron hydride ($NaBH_4$) and sodium sulfide ($Na_2S$) to obtain cathodic coloration. After coloration of silk fabric, dyeing properties (K/S value), colorfastnesses such as wash, rubbing and light, and antibacterial activity property were examined. $AgNO_3$ treating time and reducing time did not influence K/S value, whereas the pH value at alkaline region showed a high K/S value of silk fabric. The cathodic colorations of silk fabric with both of reducing agents at $30^{\circ}C$ have excellent color fastnesses. Also the high antibacterial activities were obtained by the treatment with silver nitrate even at 1% of lower concentration.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.210-218
• /
• 2015

In this study, natural substance and mineral materials was used for architectural interior wallpaper. Because natural substance and minerals are environment-friendly material with moisture adsorption and desorption properties. Natural substance and mineral materials was evaluated in moisture adsorption and desorption properties. Also, in the diatomite, the pores were observed on SEM photographs. Thus, it is supposed that moisture adsorption and desorption properties were influenced by the microstructure of the pore. The wallpaper according to the ratio of the mixture was analyzed for physical properties and moisture adsorption & desorption properties. As a result, we developed a wallpaper having excellent hygrothermal performance.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.45-53
• /
• 2012

In order to make a supermicrofiber fabric with PET/co-PET sea-island type filament fiber, the optimum conditions of dissolution of co-PET composite filament fiber was examined. The data set was made at various organic acid concentration and steam temperature with treated time as a main variable. At the same time, the microstructure changes by organic acid treatment of sea-island type PET supermicrofibers were monitored by thermal analysis morphology, DSC thermgrams and SEM images. Weight reduction behavior of supermicrofibers by caustic treatment was investigated in a comparative method. The termination of dissolution was also confirmed using DSC thermgrams and SEM images.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.74-75
• /
• 2003

Recently, people are gradually concerned about environmental issue, bionics, environmental-friendly or biocompatible materials. Poly(vinyl alcohol) (PVA) is suitable for these materials, because it is typically water-soluble polymer that have linear-flexible chains, a material of no toxicity for human, and biodegradable polymer[1]. One of the most effective factors that dominate the properties of PVAs is tacticity. (omitted)

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.165-174
• /
• 2015

To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and number of ply(3, 4 and 5) on the specific gravity and mechanical properties of PR/GF composites were investigated in this study. The optimum length of GF was found to be about 1.0inch for achieving improved mechanical properties(tensile strength and initial modulus). The tensile strength and initial modulus of composites increased with increasing GF content up to 30wt%, which is favorable content range for SMC. The specific gravity, tensile strength/initial modulus, compressive strength/modulus, flexural strength/modulus and shear strength increased with increasing the number of ply up to 5, which is the maximum number of ply range for SMC. The effectiveness of ply number increased in the flexural strength > shear strength > compressive strength > tensile strength.

• Composites Research
• /
• v.31 no.4
• /
• pp.133-138
• /
• 2018

Polymer foams were used to fill the void in the structure in addition to flame retardant and heat insulation. Polymer foams such as polyurethane, polyisocyanurate, poly(vinyl chloride), polyethylene terephthalate were used to weight lighting materials. In this study, epoxy foam was used to improve mechanical properties of polymer foam. Acid anhydride type hardener reacts with polyol. Using this phenomenon, if blowing agent was added into epoxy resin using acid anhydride type hardener, formation and compressive properties of epoxy foam was studied. Formation of polymer foam was compared with type of blowing agent and concentration of blowing agent via compressive test. As these results, optimized condition of epoxy foam was found and epoxy foam had better compressive property than other polymer foam.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.101-101
• /
• 2012

천연가죽에 색상을 부여하기 위한 염색공정에서 종전의 합성염료가 아닌 자연에서 추출한 천연염료를 이용하여 블루색상을 가지는 피혁 제조 공정을 확립하였다. 피혁에 적용 가능한 블루색상을 가지는 천연염료 중에 쪽 염료가 유일한 상황이다. 가죽 무게 대비 5%의 쪽염료를 가죽 제조 드럼에 투입하여 100분간 충분히 회전시킨 후에 가죽의 유연성을 부여하는 가지제를 12% 추가로 투입하여 블루 색상을 가지는 가죽을 제조하였다. 그 결과 마찰견뢰도, 일광견뢰도, K/S가 우수한 피혁 염색공정을 확립하였다.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.206-212
• /
• 2004

To provide guidelines and a basic understanding of static and continuous zone drawing processes, we propose two different mathematical models in terms of the processing conditions and material parameters. Although the models are not finely tuned, because of assumptions made, they are still useful for the analysis of the process and for predicting the processibility.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.18-26
• /
• 2015

para-aramid fibers were treated by atmosphere air plasma to improve the interfacial adhesion. The wettability of plasma-treated aramid fiber was observed by means of dynamic contact angle surface free energy measurement. Surface roughness were investigated with the help of scanning electron microscopy and atomic force microscopy. The tensile test of aramid fiber roving was carried out to determine the effect of plasma surface treatments on the mechanical properties of the fibers. A pull-out force test was carried out to observe the interfacial adhesion effect with matrix material. It was found that surface modification and a chemical component ratio of the aramid fibers improved wettability and adhesion characterization. After oxygen plasma, it was indicated that modified the surface roughness of aramid fiber increased mechanical interlocking between the fiber surface and vinylester resin. Consequently the oxygen plasma treatment is able to improve fiber-matrix adhesion through excited functional group and etching effect on fiber surface.