• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.110-114
• /
• 2011

This experiment was conducted to examine the ideal condition for multiple colors dyeing of cut rose, 'Akito'. Four different colors of dye were applied to make multiple flower colors in cut rose by absorption method. Acidic condition around pH 3.5 showed the fastest absorption speed in all four colors. There is no difference at each pH levels, at part of leaves dyeing, it is more affected colors rather than pH levels in purple and blue colors. From vary concentration of each dyes, $10g{\cdot}L^{-1}$ concentration of dyeing solution gave the best color definition. But it's not significant and result was different by each color in a same concentration. 10 minutes of dyeing performed pastel color and 30 minutes performed the best color definition, but the 30 minutes treatment accompanied with significant dyeing on the leaves also. As a result of this experiment, optimum condition for dyeing cut rose, 'Akito' requires pH 3.5, $5-10g{\cdot}L^{-1}$ of dye concentration and 10-30 minutes treatment.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.79-85
• /
• 2002

To develope natural dyeing materials from the unused plant materials, we had several dyeing experiments to investigate the optimum conditions of dyeing fabrics with the waste grape juice. Dyeing experiments were done under different dyeing conditions of dyeing time, dyeing temperature, pH and concentration of dyebath and mordants which were treated after dyeing. Experimental fabrics were silk, cotton, ramie and hemp. Color difference(${\Delta}E$) and Munsell's HV/C of the dyed fabrics and color fastness of silk dyed fabrics to dry cleaning, washing, rubbing, perspiration and light were measured. The color differences of dyed experimental fabrics were very slightly increased with dyeing time and the color of dyed silk was light purple and the cotton, ramie and hemp was light red purple. The color differences of dyed experimental fabrics were decreased and the color became lighter with dyeing temperature increased. The color differences of dyed experimental fabrics were decreased and the color changed from light purple to blue with the pH of dyebath increased. The color differences of dyed experimental fabrics were slightly increased with the concentration of dyebath increased. The color of dyed fabric changed with the mordant treatment and were different among the experimental fabrics. On the whole, blue tone increased with the Al and Fe mordant and green tone increased with the Cu mordant. The color fastness of dyed silk fabrics to light, washing (change) and perspiration (change) was bad and color fastness to dry cleaning and rubbing were good.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.39-42
• /
• 2003

Automatic concentration control system for pretreatment of dyeing was set up with adaptive control system supported by Fuzzy logic for the high speed successive pretreatment of fabric. Concentration of pretreatment bath was determined by the conductivity due to the ionized NaOH. Usability of this system was also evaluated with 30wt% of NaOH (conductivity of 0.25 S/cm) as an initial concentration. Conductivity fluctuated between 0.31 and 0.17 S/cm. This range accorded with the 21-35wt% of NaOH concentration.

• Fashion & Textile Research Journal
• /
• v.2 no.2
• /
• pp.118-122
• /
• 2000

Dyeing properties of silk fabric with loess were studied by investigating the effect of dyeing conditions, such as concentration of loess, dyeing temperature and time, on dye uptakes. And also the effects of mordant and mordanting methods on color change and dye uptakes were inverstigated. For the practical use, the various color fastness of dyed fabric were evaluated. The dye uptakes of dyed fabric were increased gradually with increasing concentration of loess, dyeing time and temperature. The K/S value of dyed fabric most efficient for the premordanting method. The color fastness was improved when mordants were added.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.44-51
• /
• 2000

The conventional one bath exhaust dyeing system of nylon]/cotton blends with acid dye/direct dye involves a lot of neutral salt which affect dyeability of acid dyes. Because of conventional one bath exhaust dyeing system of nylonl/cotton blends with acid dye/direct dye needs acid dyes adjusted at a neutral liquor, suitable acid dye is limited. To improve dyeing property of nylon/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of nylon/cationized cotton blends with acid dye/direct dye in a non-neutral salt dyebath by one bath two step method. The concentration of direct dye was 1.0%, 0.7%, 0.3%o.w.f. respectively at a non, 1%, 3%owf of reserving agent for being almost equal color strength between nylon and 3% cationized cotton when nylon/3% cationized cotton blends was dyed with acid dye/direct dye at concentration of acid dye(1%o.w.f.) by one bath two step method.

• Journal of the Korean Home Economics Association
• /
• v.47 no.1
• /
• pp.85-91
• /
• 2009

Dyeability and antimicrobial property of dyed pig skin with Coptis chinensis Franch was investigated. Dyestuff was extracted with water and concentrated. Pig skin was dyed and mordanted according to various dyeing temperature, dyeing time, dyestuff concentration, mordanting methods and kinds of mordants. The results of this experiment were as follows: 1. Dyeability of pig skin with Coptis chinensis Franch was best at 200%(owf) dyestuff concentration, 50${^{\circ}C}$ dyeing temperature, and 20min. dyeing time. 2. Pre-mordanting by Cu improved the K/S values of dyed pig skin. 3. Surface color and color difference of dyed pig skin showed various results according to the mordants used : generally their color was yellow, Al post-mordanted pig skin showed the greatest color difference. 4. Color fastness to drycleaning was considerably high in case of staining compared to fading. Fastness to light was improved by Cu-mordanting while other treatments were not effective. 5. Antimicrobial property of samples was not different (99.9%) between untreated and treated.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.1-9
• /
• 2006

The purpose of this study is to investigate the dyeability, antibacterial activity on silk and rayon fabrics dyed with cochineal. The result are as follows; 1. The K/S value of silk fabric was higher than that of rayon fabric. 2. The optimum conditions are mordant concentration $0.5{\sim}1%$, dyeing material concentration 2.0%(o.w.f), dyeing temperature $60^{\circ}C$, PH 3 and dyeing time 30minutes. 3. Pre-mordanting method had higher dyeing absorption than post mordanting method in case of silk and rayon fabrics. 4. The antibacterial activity of dyed silk fabrics were higher than that of dyed rayon fabrics and the antibacterial activity was increased by mordanting. 5. The lightfastness and perspiration fastness of silk fabric were improved but these of rayon were not. Dyeing fastness was improved by Fe mordanting on both fabrics.

• Textile Coloration and Finishing
• /
• v.3 no.2
• /
• pp.34-42
• /
• 1991

The effects of electrolyte on dyeing properties of cotton fiber with Congo Red have been studied at 90, 70 and $40^{\circ}C$. Each dyeing carried into an infinite bath with $1\times10^{-4}$ mol/l of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow; 1. The equilibrium adsorption of dye $(C_\infty)$ values decreased with increasing dyeing temperature, $C_\infty$ values increased in the order KCl>NaCl>LiCl. 2. The values of apparent diffusion coefficients $(D_a)$ increased with increasing dyeing temperature, but $D_a$ values decreased in the order KCl$D_a$ values decreased with increasing electrolyte concentration. 4. Effect of electrolytes decreased with increasing dyeing temperature. 5. The values of standard affinities of dyeing $(-\triangle\mu^{\circ})$, the standard heats of dyeing $(-\triangleH^{\circ})$, and the standard entropies $(-\triangleS^{\circ})$, increased in the order KCl>NaCl>LiCl. 6. Equilibrium adsorption isotherm curve were Freundlich type, and in the Equation y=a.x$^{n}$ , the values of a and n increased in the order KCl>NaCl>LiCl. 7. The value of $-\triangle\mu^{\circ}$, $-\triangleH^{\circ}$, and $-\triangleS^{\circ}$, decreased with increasing electrolyte concentration.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.101-109
• /
• 2010

The objective of this study is to investigate the characteristics of natural indigo dyeing of cotton fabric. Reduction and dyeing were carried out by one-step process using an infrared dyeing machine at the liquor ratio of 1:100, and subsequently oxidation and washing in water were followed. Dye uptake was increased with the increase of indigo concentration. Over the full range of dyeing tests, the dyeing condition was optimized to $40^{\circ}C$ for 40min. For most of dye concentrations, the cotton fabrics showed mainly PB color. Maximum K/S value was shown at 4g/L of sodium hydrosulfite concentration and the color strength increased with the increase of dye concentration. Value(lightness) decreased with the increase of dye uptake irrespective of mercerization or reduction method, while the mercerized cotton showed two times higher dye uptake than the untreated cotton. Whereas hue of the untreated cotton showed large decrease of P character(5.6~3.5 PB) with the increase of dye uptake, that of the mercerized cotton increased P character(4.7~5.5 PB). Irrespective of mercerization, value and chroma decreased with the increased of dye uptake. In addition, the untreated showed lower chroma than the mercerized cotton. In the case of traditional reduction, hue of the untreated cotton was changed very little with the increase of dye uptake. For hydrosulfite reduction, P character decreased with the increase of dye uptake. The difference of hue value was small with the change of reduction method(hydrosulfite reduction or traditional fermentation). Color character was not influenced by the changed maximum absorption wavelength. Washing fastness showed 4~4/5 shade change rating without any staining. And dry rubbing fastness was good at low color strength. The bacterial reduction ratios of dyed cotton fabric were also increased.