• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.69-75
• /
• 2011

A pre-treatment process has been developed for natural dyeing of wool by which the dyed materials have been imparted antimicrobial efficacy against both gram-positive and gram-negative bacteria durable up to 20 washes. In this process, wool fabrics were treated with citric acid under oxidizing condition prior to dyeing. The treated fabrics were then dyed with four different types of natural dye powders obtained from leaves of silver oak, wattle, tanner's senna and flame of forest. All the natural dyes produced yellowish brown colour on wool fabrics. The washing and light fastness properties of the fabrics subjected to pre-treatment were one grade higher compared to those of the dyed fabrics without pre-treatment. The pre-treated wool fabrics showed antimicrobial efficacy against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). The fabrics dyed without pre-treatment showed antimicrobial efficacy against gram-positive bacteria (Staphylococcus aureus) only. The durability of antimicrobial efficacy was higher in pre-treated and dyed wool fabrics compared to the dyed fabrics without pre-treatment.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• 한국염색가공학회지
• /
• 제14권5호
• /
• pp.284-293
• /
• 2002

Nylon 6 and polyester taffeta fabrics are dyed in aqueous medium with vat dyes such as Indanthren Red FBB, Mikethren Blue ACE and Mikethren Blue HR varying the compositions of sodium hydrosulfite and NaOH. Also nylon UMF nonwoven and polyester UMF knitted fabrics are dyed with metal complex and disperse dyes as a reference, and the wash and rubbing fastnesses for these dyes are investigated. In vat dyeing of polyester and nylon taffeta, an optimum composition of sodium hydrosulfite/NaOH is existed at a range of 1∼2wt%/0.2wt%. A good build-up property for Mikethren Blue ACE on nylon 6 UMF nonwoven fabric is shown at high temperature. Vat dyeing of polyester with Mikethren Blue Ace shows a good color shade in a higher temperature, while dyeing with Mitsui Blue HR shows low temperatures. Vat dyes In dyeing of both nylon 6 UMF nonwoven and polyester UMF knitted fabrics have a better wash fastnesses compared with metal complex or disperse dyes.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.1-7
• /
• 1995

A new dyeing M/C, called Green-flow was developed in this study. A new M/C was applied to mixed air flow method combined aerodynamic technology to fabric speed power. The polyester fabric was dyed of beige color with a new M/C and Luft-roto dyeing M/C made by Thies Company(German) with the same dyeing condition (liquor ratio=1 : 3.5, Fabric speed = 450yds/min.) for comparision. The results showed that the color fastness to dye and drapability of the fabrics dyed with both M/C were almost the same and the levelness and T.H.V of the fabrics dyed with Greenflow were better than those dyed with Luft-roto M/C. In addition, it is found that the fabric speed of 502yds/min was a suitable for both M/C.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.237-244
• /
• 2018

Three super hydrophobic red fluorescence dyes were selected to dye high molecular weight polyethylene fiber. Their absorbance and emission spectra were obtained and Stokes' shift was measured. Fluorescence emission strength of the dyes on the fiber was investigated and therefore Fluoro Red 3 was determined as the best one among those three dyes in this experiment. Dyeing properties and fluorescence intensities were investigated using the Fluoro Red 3 on high molecular weight polyethylene fiber at various dyeing conditions. The optimum concentration of a dispersing agent was appeared at 10wt% in aqueous solution. The best dyeing was obtained at $125^{\circ}C$ for 1 hour. The color fastnesses to the washing and rubbing were as high as ratings 4~5, however, the fastness to light was exhibited ratings 2~3.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.199-207
• /
• 2020

Recently, as the demand for masks increases, the use of filter-replaceable cotton masks is increasing. A filter-replaceable cotton mask is one of the ways to solve the environmental problems of a disposable nonwoven mask because only the filter can be replaced after washing. Cotton fiber products are known to be environmentally friendly, but cotton products dyed with general synthetic dyes are not safe for humans. In this study, to prepare of cotton mask applied with natural dyeing, the optimal dyeing conditions are set when dyeing with gallnut extract. A polychromatic natural dye that changes color by mordant, and the functionalities of gallnut dyeing fabrics are evaluated. The experimental method is dyed the gallnut by temperature and time by concentration to set the optimal conditions. The color fastness rating grade of aluminium potassium sulfate dodecahydrate, copper(ll) sulfate pentahydrate, and iron(ll) chloride tetrahydrate were evaluated after the pre/post mordanting.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.47-57
• /
• 2007

This study focused on the properties natural dyeing and natural material and on the development of functional material for well-being in apparel industry. Comus officinalis Siebold et Zuccarini is used as natural dyeing material which had been reported that have curable effect for unbalanced immunity, geriatric diseases like urinary tract system, diabetes, hypertension, arthritis, tinnitus, hyperhidrosis and women's diseases like hypermenorrhea. And this material also has anti-cancer effect so that can restraint cancer cells. 3 kinds tester of cotton, wool and silk are dyed by boiled with each dye (flower, fruits, bark of tree) as first dyeing and dried in the shade. These testers are done by post-mordanting method. Aluminium Potassium(Alk(SO4)2), Cuprie Sulfate($CuSO4{\cdot}5H2O$), Stannous Chloride($SnCl2{\cdot}2H2O$), Ferrous Sulfate($FeCl2{\cdot}4H2O$), Titanium Sulfate 24% aqueous solution(Ti(SO4)2) are used as mordants. Dyeing results of Comus officinalis Siebold et Zuccarini flower and bark are shown as yellow color series. And dyeing result of fruits is pink color series. Silk shows the best dyeing property. As the point of view for dyeing property, Ti, Sn, Fe would be the properchoice for mordant. Following results are extracted in this study. Yellow color is resulted in dyeing with Cornus officinalis flower as non-mordanting condition. Yellowish red color is come from dyeing with Comus officinalis fruit as non-mordanting condition. Grayish yellow tone is resulted in dyeing with bark as non-mordanting condition. Orange tone color with Ti-mordanting, green tone color with Sn-mordanting and gray tone color with Fe-mordanting is resulted respectively. However light-fastness of Comus officinalis(flower, fruit, bark) is very low as 1 or 2 level in non-mordanting condition, Comus officinalis flower dyeing is turned out 3 or 4 level and fruit dyeing is 4 or 5 level, bark dyeing is 2 or 3 level with Ti-mordanting respectively. Eventually Comus officinalis fruit has the best light-colorfastness property among all of dyes. dry cleaning colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, perspiration-colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, With these results, this study could conclude that dye-ability, colorfastness problem is getting better after mordanting process and practical usage would be possible.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.788-799
• /
• 1999

This study was performed to investigate the effect of mordants on the dyeability colorfastness to light and to laundering and biological properties of mordanted and natural-dyed cotton and silk substrates. Natural red dyes were extracted from Caesalpinia Sappan L. (Sappan wood) and Rubia Akane Nakai (Madder) by boil water Five different compounds of Al, Cr, Cu, Fe and Sn were used as mordanting agents. The result of this study are sumarized as follows ; 1. In the of the fabrics mordanted and dyed with sappan wood K/S value increases and λmax shifts to the longer wavelength as mordant concentration increases. Color of the fabrics dyed with sappan wood and madder change to redder bluer and lighter after mordanting. 2. As the number of repetition of dyeing-mordnating process increase the color of the dyed fabrics tend to be redder bluer and darker. Mordanted dyes with Al and Sn make chroma increase. The quantity of mordant absorbed in the silk fabric increase as mordant concentration increase. More Fe is absorbed in silk than Cr is. 3. After being exposed to light the fabrics dyed with sappan wood and madder change to less red Fe and Cu mordanting yeild better colorfastness to light than others does. Natural-dyed fabrics exposed to light tend to be faded and whitened in CIELAB chromaticity co-ordinates. So we might trace back the original color of ancient faded fabrics by changes in color of natural dyes. 4. After washing the colors of natural dyes change to more blue, Fe and Cu mordanting give better colorfastness to wash than others do. 5. The soil-burial cotton is more susceptible to mildew and rot than the silk is. Antimicrobial activity of the natural-dyed cotton can be enhanced by Cu and silk can be enhanced by Cu and Cr mordanting respectively.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.