• 자연과학논문집
• /
• 제10권1호
• /
• pp.103-109
• /
• 1998

본 연구는 오존의 강한 산화력을 이용하여 기상의 처리방법에 따른 비스코스 레이온의 탈색효과를 연구하였다. 오존이 발생할 때는 기체상태로 고농도이지만, 수용액 상태로 물에 녹이는 과정에서 기화요인에 의하여 오존의 손실이 많았다. 따라서 기존의 오존처리방법인 수용액상태의 처리방법이 아니라 기상의 오존을 직접 직물에 처리하므로 고농도의 오존을 단시간동안 처리하여 직물에 존재하는 색소를 산화시켜 탈색하는 방법을 사용하였다. 기상의 오존은 직접 유기색소와 반응하지 않기 때문에 물을 매개체로 하여 pick up ratio를 60%, 50%, 40%, 30%, 20%로 변화시키면서 비스코스 레이온의 탈색에 대하여 연구하였다. Pick up ratio가 40%일 때가 유기색소를 분해하는데 필요한 최적의 수산기가 발생하므로 처리포의 탈색효과가 가장 좋았다. 그러나 처리기간이 길수록 너무 과다하게 오존에 의해 산화되므로 강도와 신도의 저하를 초래하였다. 따라서 최적의 기상오존 처리시간은 60분정도에서 처리하는 것이 강도와 신도의 저하를 가장 적게 할 수 있고 백도도 향상시킬 수 있는 것으로 사료된다.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.358-365
• /
• 2004

The photocatalytic oxidation of Rhodamine B(RhB) was studied using photocatalytic reactor filled with module of quartz tube. Module of quartz tube consisted of small quartz tube (inner diameter, 1.5 mm; outer diameter, 3 mm) bundle coated with powder $TiO_2$ and uncoated large quartz tube (inner diameter, 20 mm; outer diameter, 22 mm). Two 30 W germicidal lamp was used as the light source and the reactor volume was 0.5 l. The effects of parameters such as the coating materials and numbers, initial concentration, $H_{2}O_2$ dose and metal deposition (Ag, Pt and Fe) and simultaneous application of $H_{2}O_2$ and metal deposition. The results showed that the initial reaction constant of quartz module coated with powder $TiO_2$ was higher 1.4 time than that of the $TiO_2$ sol and optimum coating number is twice. In order to increase reaction rate, simultaneous application of photocatalytic and photo-fenton reaction using Fe coating and dose $H_{2}O_2$ dose increased reaction rate largely.

• 한국환경과학회지
• /
• 제18권1호
• /
• pp.49-60
• /
• 2009

Fabrication and oxidants formation of 1 and 2 component metal oxide electrode, which is known to be so effective to destruct non-biodegradable organics in wastewater, were studied. Five electrode materials (Ru, Pt, Sn, Sb and Gd) were used for the 1 and 2 component electrode. The metal oxide electrode was prepared by coating the electrode material on the surface of the titanium mesh and then thermal oxidation at $500^{\circ}C$ for 1 h. The removed RhB per 2 min and unit W for one component electrode decreased in the following sequences: Ru/Ti>Sb/Ti>Pt/Ti>Gd/Ti>Sn/Ti. The concentration of oxidants generated in 1 and 2 component electrodes was in the order of: $ClO_2$> free Cl>$H_2O_2>O_3$. OH radical was not generated from in entire one and two component electrodes. RhB degradation rate and generated oxidants of the Ru-Sn=9:1 electrode was higher than that of the two component electrode. The exact relationship between the removal of RhB and the generated oxidants concentration was not obvious. However, it was assumed that electrode with high RhB decolorization had high oxidant concentration.

• Journal of Microbiology and Biotechnology
• /
• 제23권12호
• /
• pp.1757-1764
• /
• 2013

Trichoderma harzianum ZF-2 producing laccase was isolated from decaying samples from Shandong, China, and showed dye decolorization activities. The objective of this study was to optimize its culture conditions using a statistical analysis of its laccase production. The interactions between different fermentation parameters for laccase production were characterized using a Plackett-Burman design and the response surface methodology. The different media components were initially optimized using the conventional one-factor-at-a-time method and an orthogonal test design, and a Plackett-Burman experiment was then performed to evaluate the effects on laccase production. Wheat straw powder, soybean meal, and $CuSO_4$ were all found to have a significant influence on laccase production, and the optimal concentrations of these three factors were then sequentially investigated using the response surface methodology with a central composite design. The resulting optimal medium components for laccase production were determined as follows: wheat straw powder 7.63 g/l, soybean meal 23.07 g/l, $(NH_4)_2SO_4$ 1 g/l, $CuSO_4$ 0.51 g/l, Tween-20 1 g/l, $MgSO_4$ 1 g/l, and $KH_2PO_4$ 0.6 g/l. Using this optimized fermentation method, the yield of laccase was increased 59.68 times to 67.258 U/ml compared with the laccase production with an unoptimized medium. This is the first report on the statistical optimization of laccase production by Trichoderma harzianum ZF-2.

• Applied Biological Chemistry
• /
• 제49권3호
• /
• pp.165-169
• /
• 2006

염색공단 주변의 토양과 하수로부터 아조염료 분해 탈색능이 우수한 MB2균을 분리하여 Citrobacter sp.로 동정하였다. Citrobacter sp. MB2의 성장 최적배지 및 배양조건은 sucrose 0.5%, yeast extract 1.0%, $K_2HPO_4$ 0.1%, $NaHCO_3$ 0.1%, pH 7.0, 배양온도 $30^{\circ}C$에서 호기적 진탕배양이었으며, 최적배지에서의 균성장은 분리용 배지나 nutrient broth에서의 균성장보다 각각 7배 및 50배 이상 개체수가 증가하였다. Citrobacter sp MB2는 금속염에 대해 강한 내성을 보였으며, 항생제 ampcillin과 penicillin G에 대해서 강한 내성을 보였다.

• 대한임상검사과학회지
• /
• 제38권2호
• /
• pp.87-93
• /
• 2006

This study was done to know a kind and change (transition) of enzymes produceed by Streptomyces halstedii ssp. scabies SA1-27 and Streptomyces violaceusinger C1-6 which showed good lignolytic activity and a good decolorization ratio of remazol brilliant blue R(RBBR) dye. These strains were isolated from soil and identified by the author. The basal medium containg 0.2% glucose was used to measure enzyme activity, Lignin peroxidase 1 (Lip 1) was measured by the methods of Choi, and Bourbonnais and Paice. Lignin peroxidase 2 (Lip 2) was measured by the methods of Ishida et al and Ramachandra et al using 2.4-dichlorophenol(2.4 DCP), manganese peroxidase(Mnp), veratryl alcohol oxidase (VAO), and laccase. They were measured by each of the methods of Choi and Paszczynski et al, and Bourbonnais and Paice, and De Jong et al. In the results, the kind of enzymes produced by Streptomyces halstedii ssp. scabies SA1-27 were Lip 1, Lip 2, VAO, and laccase, and their activities indicated the highest value as each 4.95 nmol/mg protein, $8.45({\times}100^{-3})unit$, 10.25 nmol/mg protein, 9.20 nmol/mg protein on the sixth day of the culture and decreased gradually over time. The kind of enzymes produced by Streptomyces violaceusinger C1-6 were Lip 1, Lip 2, Mnp, VAO, and laccase, and their activities indicated the highest value as each 4.90 nmol/mg protein, $13.85({\times}100^{-3})unit$, 3.10 nmol/mg protein, 11.30 nmol/mg protein, 4.45 nmol/mg protein on the sixth day of the culture and decreased gradually over time. Consequently, the author knew the fact that there were few differences in the kind and quantity of enzymes produced by the two Streptomyces strains, but all enzyme activities indicated the highest value on the sixth day of the culture and decreased gradually over time.

• Journal of Microbiology and Biotechnology
• /
• 제28권12호
• /
• pp.2057-2063
• /
• 2018

Laccases can oxidize a variety of phenolic and non-phenolic substrates including synthetic dyes. In this research, a laccase gene Lcc9 from Laccaria bicolor was chemically synthesized and optimized to heterogeneous expression in Pichia pastoris and Arabidopsis thaliana. The properties of recombinant laccase expressed by P. pastoris were investigated. The laccase activity was optimal at 3.6 pH and $40^{\circ}C$. It exhibited $K_m$ and $V_{max}$ values of $0.565mmol\;l^{-1}$ and $1.51{\mu}mol\;l^{-1}\;min^{-1}$ for ABTS respectively. As compared with untransformed control plants, the laccase activity in crude extracts of transgenic lines exhibited a 5.4 to 12.4-fold increase. Both laccases expressed in transgenic P. pastoris or A. thaliana could decolorize crystal violet. These results indicated that L. bicolor laccase gene may be transgenically exploited in fungi or plants for dye decolorization.

• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.50-57
• /
• 2017

금속산화물 반도체 중 하나인 산화아연은 인체에 무해하고 친환경적이며, 우수한 화학적, 열적 안정성의 특성을 지니며 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 높은 엑시톤 바인딩 에너지로 인해 태양전지, 염료페기물의 분해, 가스센서 등 다양한 분야에 응용이 가능한 물질이다. 산화아연은 입자 형상 및 결정성의 변화에 따라 광촉매 활성이 변하게 된다. 따라서, 다양한 실험변수와 첨가제를 사용하여 입자를 합성하는 것이 매우 중요하다. 본 논문에서는 마이크로파 수열합성법을 사용하여 산화아연을 합성하였다. 전구체로는 질산아연을 사용하였고, 수산화나트륨을 사용하여 용액의 pH를 11로 조정하였다. 첨가제로는 계면활성제인 에탄올아민, 세틸트리메틸암모늄브로마이드, 소듐도데실설페이트, 솔비탄모노올레이트를 첨가하였다. 합성된 입자는 별모양, 원추형, 씨드형태, 박막형태의 구형의 형상을 보였다. 합성된 산화아연의 물리 화학적 특성은 XRD, SEM, TGA을 통하여 확인하였고, 광학적 특성은 UV-vis spectroscopy, PL spectroscopy, Raman spectroscopy으로 확인하였다.