• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.338-343
• /
• 2015

Dye sensitized solar cells (DSSCs), which is one of the contending renewable energy sources, have the problem of low efficiency. To improve the efficiency, the fast electron transport and long electron lifetime are required. In this study, one-dimensional sodium hexatitanate, which is expected to have an advantageous structure for electron transports, was synthesized and the feasibility of the material on DSSC was tested. Its physical properties were characterized by the SEM, XRD, and BET method. The dye adsorption and solar cell properties were also characterized. In addition to the expectation of fast electron transport, sodium hexatitanate showed longer electron lifetime: This means sodium hexatitanate can improve the DSSC efficiency. However, it showed low current and voltage because of the low surface area leading to the low amount of dye adsorbed. Therefore, it should be mixed with titanium oxide with high surface area for the optimal performance.

• The Research Journal of the Costume Culture
• /
• v.19 no.2
• /
• pp.324-333
• /
• 2011

This study was accomplished for the purpose of developing a textile processing ingredient that is harmless to the human body and environment. The research method consists of dyeing cotton textiles by extracting the dye solution from ginseng. Then, chrominance, after treatment, antibacterial ratio and deodorization ratio of cotton fabrics dyed with ginseng extracts were tested and results were examined. The research procedure involved first extracting the dye solution from the ginseng's by-product (fine roots) and then dyeing was effectuated differently according to the test samples temperature and dyeing time requirements. Brightness in all dye substances was lower in pre-mordanting. Beige color could be extracted from pre-mordanted samples. And dark orange from postmordanted samples. Color-festness was high in all samples. Most of samples show a big antibacterial ratio and deodorization ratio. Through this research it has been discovered that, when applied to textiles, Korea's ginseng extract possessed reproducibility features as a natural dye and a possibility to be used in cutting which plays a crucial role in hygienic processing. In addition, by using ginseng's by-product for dyeing processing as the dye solution, efficient application of resources and occurrences of no water waste damages were demonstrated and thus, proved to be environmentally-friendly. Specifically, through this experiment, it was found that saponin, ginseng's special characteristics, possessed excellent antibacterial odor repelling functions to clothing as well as the capability to prevent skin disease.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.52-56
• /
• 2006

Some of factors affecting photo-conversion efficiency of dye sensitized solar cells (DSCs) are discussed in terms of $TiO_2$ electrodes. The first topic is on the surface modification of $TiO_2$ nano-particles, which is associated with electron traps on the surface of $TiO_2$ nano-particles. The surface is modified with dye molecules under pressurized $CO_2$ atmosphere to increase the surface coverage of $TiO_2$ nano-particles with dye molecules. This increases Jsc because of an increase in the amount of dye molecules and a decrease in the amount of trapping sites on $TiO_2$ nano-particles. In addition, the decrease in the amount of trap sites increases Voc because decreases in Voc are brought about by the recombination of $I_2$ molecules with electrons trapped on the $TiO_2$ surfaces. Selective staining for tandem cells is proposed. The second topic is on the contact between a $SnO_2$/F transparent conductive layer (TCL) and nano-particles. Polishing the TCL surfaces with silica nano-particles increases the contact, resulting in Jsc increases. The third topic is the fabrication of ion-paths in $TiO_2$ layers. Electro-spray coating of $TiO_2$ nano-particles onto TCL is shown to be effective for fabricating ion-paths in $TiO_2$ layers, which increases Jsc.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.1-6
• /
• 1999

The porosities of PET fibers were investigated using a nitrogen porosimeter according to oxygen plasma treatment and dyeing with a disperse dye, and they were discussed in terms of the change of internal micro-structure of the PET fiber. The total pore volume, surface area and average pore size of the plasma treated PET fibers increased expectably compared with the untreated sample. The PET fibers treated with oxygen plasma and then dyed with a disperse dye were increased significantly in the surface area and the total pore volume comparing with those of plasma treated only, but decreased in the average pore size. The increase of the surface area, after dyeing, of the plasma treated PET fibers was due to addition of the surface area of the dye itself to that of the PET fiber. The increase of the total pore volume of the plasma treated PET fibers by dyeing, which is the opposite result to the general idea that the pore volume of fibers would be reduced by occupation of dye molecules in the pores, could be explained by the free-volume model. This is that the amorphous region in the fiber expanded by occupation of dye molecules, and the marginal space surrounding dyes was generated as many smaller pores, and the decrease of the average pore size of the dyed sample also could be explained The decrease of the average pore size was caused by the splitting of a larger pore into smaller pores.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.312-319
• /
• 2017

The treatment of dyeing wastewater is not easy because dyes are mainly aromatic, heterocyclic compounds. The most effective technologies and methods to treat dyeing wastewater are costly and involve materials that are difficult to regenerate after use. Therefore, it is necessary to develop cost-effective, eco-friendly technologies to treat dyeing wastewater. The aim of this study was to investigate the removal of sulfur blue 11 (CI 53235) anionic dye using methyl esterified sericite (ME-sericite) adsorbents in an aqueous solution. The results are discussed in terms of the ME-sericite particle size, temperature, pH value and initial sorption rate according to the initial sulfur blue concentration. In addition, we analyzed the adsorption kinetics using a Pseudo-second-order model with the desorption and reusability. The methyl esterification caused a considerable increase in the specific surface area from 4.45 to $17.62m^2/g$. The ME-sericite adsorbents successfully removed > 98% of the sulfur dye in the aqueous solution. For the adsorption of 1 mg of sulfur dye, approximately 4.6 to 6.6 g/L ME-sericite were required. The desorption process was carried out by mixing a NaOH eluent to desorb 90.56% of the sulfur dye with 2 h of contact time. Thus, the ME-sericite is a promising adsorbent to treat dyeing wastewater due to its low dose requirement, high removal efficiency and inexpensive material.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.3
• /
• pp.14-19
• /
• 2010

Partial anodic oxidation of Ti-mesh with a wire diameter of ~200[${\mu}m$] produces self-aligned $TiO_2$ nanotube arrays (~50[${\mu}m$] in length) on Ti-mesh substrate. The electrolyte used for anodic oxidation was an ethylene glycol solution with an addition of 1.5 vol. % $H_2O$ and 0.2 wt. % $NH_4F$. A dye-sensitized solar cell utilizing the photoanode structure of $TiO_2$-nanotube/Ti-mesh was fabricated without a transparent conducting oxide (TCO) layer, in which Ti-mesh replaced the role of TCO. The 1.93[%] photoconversion efficiency was low, which can be attributed to both insufficient dye molecules attachment and limited electrolyte flow to dye molecules. The optimized nanotube diameter and length as well as the $TiCl_4$ treatment can improve cell performance.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.397-399
• /
• 2012

Dye-sensitized solar cells (DSSCs) have received considerable attention as the most promising candidates for renewable energy systems in recent years. Among these, organic dyes which have many advantages such as large absorption coefficients, customized molecular design for desired photophysical and photochemical properties, inexpensiveness and environment-friendliness, are suitable as photosensitizers for DSSCs. We have studied on the design and synthesis of two organic dyes (BECZ 1 and BECZ 2) with a 9-ethyl-9H-carbazole core for dye-sensitized solar cells (DSSCs). Two organic dyes comprised of two 9-ethyl-9H-carbazole moiety as electron-donor, two types of cyanoacrylic acid moiety acting as acceptor. In addition, n-ethyl unit introduced for increasing the solubility and the donating power. The obtained organic dyes were comprehensively characterized by NMR, GC-MS, FAB-MS and UV/Vis spectroscopies. DSSCs sensitized by the dyes BECZ1 and BECZ2 produced ${\eta}$ value 3.31% and a ${\eta}$ value 3.21%.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.208-215
• /
• 2018

The objective was to investigate the efficacy of Metasequoia(Metasequoia glyptostroboides) cone colorants as a new functional dye for wool fiber. Effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for wool fiber. Compared with cotton and silk fibers, wool fiber showed better affinity for the Metasequoia cone colorants. Fe and Cu mordants improved dye uptake, and mordanting did not change the color of dyed fabric with YR Munsell color. Colorfastness to rubbing and washing was as good as grade 4, whereas lightfastness of the dyed fabrics was above grade 3. Antimicrobial activity of the colorants was very high 99.3% of reduction rate toward S. aureus. It was confirmed that Metasequoia cone colorants can be utilized as a new functional natural dye for wool fiber. In addition, considering its high antimicrobial functionality it could be applied to cosmetics and food.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1100-1101
• /
• 2015

In this work, the effect of addition of acetylacetone on microstructure and quality of nanoporous $TiO_2$ photo-electrodes was studied in dye-sensitized solar cells (DSCs) and structure and electrical properties of fabricated cells were investigated. From the results, the DSCs fabricated with acetyl acetone showed highest photovoltaic performances. This behavior may be attributed to paste agglomeration decrease and interconnection and bonding improvement between $TiO_2$ particles. Furthermore, the most favorable dye absorption time results to be 10h: exceeding this time a decrease in efficiency is observed despite the increasing amount of dye absorption. The $TiO_2$ photo-electrode prepared under the conditions of acetylacetone ratio of 15% and dye absorption time of 10hr showed the better photovoltaic performance ($J_{sc}=12.48mA/cm^2$, $V_{oc}=0.69V$, ff=0.68, ${\eta}=5.86%$).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.3
• /
• pp.336-346
• /
• 2011

Dyeing properties of protein fiber with bamboo colorants were studied by investigating the effect of dyeing conditions such as dye concentration, dyeing temperatures, times on dye uptakes, effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use. In addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. The dye uptake increased as the dyeing concentration increased. Bamboo colorants showed relatively good affinity to protein fiber and produced a yellow color. Dye uptake increased as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for increasing dye uptake. The color of fabric mordanted with Cu and N.Cu changed to GY. Colorfastness of dyed fabrics showed a relatively good rating, and mordanting had no significant effect on colorfastness. Dyed silk fabric showed very good antimicrobial abilities of 99.9%. Also, ultraviolet-cut ability and deodorant ability were improved in silk fabric dyed with bamboo extracts.