• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.2
• /
• pp.128-141
• /
• 2018

Industrial complex releasing huge amounts of dusts, fumes and wastewater containing heavy metal(loid)s could be a source of heavy metal(loid)s pollution in arable soil. Heavy metal(loid)s pollution in arable soil adversely affect crops safety, subsequently human being. Hence, it is important to accurately assess the heavy metal(loid)s pollution in soil using pollution indices. The objectives of this study are 1) to compare assessment methods of heavy metal(loid)s pollution in arable soils located near industrial complex in Gyeongsang provinces and 2) to determine the relationship between concentration of plant available heavy metal(loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 10 industrial complex in Gyeongsang provinces. The average total concentration of all heavy metal(loid)s of the studied soils was higher than that of Korean arable soils but did not exceed the warning criteria established by the Soil Environmental Conservation Act of Korea. Only six sites of arable soils for the total concentration of As, Cu and Ni exceeded the warning criteria (As: $25mg\;kg^{-1}$, Cu: $150mg\;kg^{-1}$, Ni: $100mg\;kg^{-1}$). The contamination factor (CF) and geoaccumulation index ($I_{geo}$) of the heavy metal(loid)s in arable soils varied among the sampling sites, and the average values of As and Cd were relatively higher than that of other metals. Results of integrated indices of As and Cd in arable soils located near industrial complex indicated that some arable soils were moderately or heavily polluted. The plant available concentration of heavy metal(loid)s was negatively related to the soil pH and negative charge of soil. Available Cd, Pb, and Zn concentrations had relatively high correlation coefficient with pH and negative charge of soil when compared with other heavy metal(loid)s. Based on the above results, it might be a good soil management to control pH with soil amendments such as lime and compost to reduce phytoavailability of heavy metal(loid)s in arable soil located near industrial complex.

• Tuberculosis and Respiratory Diseases
• /
• v.38 no.2
• /
• pp.143-154
• /
• 1991

Pneumconiosis is a sort of pulmonary fibrosis consequent to the inhalation of the respirable dusts. Thus, the pathogenesis of silicosis have concentrated largely on the early response of alveolar macrophage and the later fibroblastic stimulation. But the role of the other cells and continuing cell injury in the pathogenesis has not been fully studied. And the chemical factors such as prostaglandin, fibroblast stimulating factor and inhibiting factor and chemotaxin are also participated in the mechanism of pulmonary fibrosis in silicosis. In order to clarify the role of alveolar cells and prostaglandin, we investigated the changes of the cellularities in bronchoalveolar lavage fluid and tissue pathology in the experimental silicosis with the time sequence. The experimental animals were divided into 3 groups; control group received only intratracheal injection of 0.5 ml saline, silica group received the intratracheal instillation of 40 mg silica with the same amount saline, and aspirin group received 450 mg/kg of aspirin after silica instillation. The results were as follows: 1) The total cells of bronchoalveolar lavage fluid in the silica group markedly increased in comparison with the control group, but there was no significant difference between the silica and aspirin groups. 2) The percentages of alveolar macrophages to the total number of cells in the silica group tended to be lower than those in the control group and also lower than those in the aspirin group at the 1st week after silica instillation. 3) The percentages of neutrophils to the total number of cells in the silica group were significantly higher than those in the control group during the entire period and also higher than those in the aspirin group at the 3rd day after silica instillation. 4) In the silica group, the percentages of lymphocytes to the total number of cells were increased 143 progressively with the time course and those were significantly higher than those in the control group from the 3rd week after silica administration. There were marked differences of lymphocyte percentages between the silica and aspirin groups at the 1st week after silica instillation. 5) The inflammatory change was observed in the rat lung at the 1st day after silica instillation. Also the silicotic nodule appeared in the silica group at the 1st week but we could not find out that nodule in the aspirin group at that time. The fibrotic changes in the rat lung tended to be increased progressively with the time course, therefore, the diffuse fibrotic pattern appeared in the whole field at the 20th week after silica instillation. 6) By the electron microscopy, there were gradual increases of phagosomes and vacuoles in the alveolar macrophage in the silica group as compared with the control group. These results suggest that the neutrophils and the lymphocytes have also participated in the pulmonary fibrosis even though the alveolar macrophage has a major role, and prostaglandin mediate the inflammation and pulmanary fibrosis in the experimental silicosis.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.665-670
• /
• 2000

Linear annealing method was developed to increase the bond strength of Si wafer pair mated at room tem­perature instead of conventional furnace annealing method. It has been known that the interval of the two mating wafer surfaces decreases and the density of gaseous phases generated at the interface increases with increase in an-nealing temperature. The new annealing method consisting of one heat source and light reflecting mirror used these two phenomena and was applied to Si$\mid$$\mid$Si and Si$\mid$$\mid$$SiO_2/Si$ bonding. The bonding interface observed directly by using IR camera and HRTEM showed clear bonding interface without any unbonded areas except the area generated by the dusts inserted into the mating interface at the room temperature. Crack opening method and direct tensile test was ap­pplied to measure the bond strength. The two methods showed similar results. The bond strength increased continuous­tly with the increase of annealing temperature.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.44-52
• /
• 2017

This paper is based on a study of the response characteristics of photoelectric type smoke detector chambers according to dust color. Due to an amendment to the Fire Safety Codes to automatic fire alarm systems and visual alarm device, the installation of indoor smoke detectors has become mandatory, but in Korea there is still insufficient research on the non-operation or false alarms that could arise in indoor environments by indoor dust and other environmental conditions etc. In light of this, for this study, research was conducted on the indoor adaptability of smoke detector under various colors of fiber dust that were judged to occur most frequently in among the common indoor dust, photoelectric smoke detector with the lattice-type smoke detection chamber that the smoke detector which is most popular in the country was used, and four colors of fiber dust (brown, white, gray and black) were used the test dusts for carrying out dust and sensitivity testing. Also, the voltage of the photocell part of the smoke chamber was measured, and the scattering phenomenon in the chamber was observed. The result of the testing showed that all four dust types were suitable for dust and sensitivity testing under conditions of pollution A. Yet, there were occasions, at pollution B or C, where the brown, white and gray dust would cause fail alarm during operation testing. And black dust was confirmed to cause non-operation during operation testing. In the case of brown and white dust, the voltage measurement result of the photocell part of the smoke chamber confirmed that the voltage increases as the pollution level increases, and in the case of gray and black dust, the voltage decreases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.78-84
• /
• 2019

The purpose of this study is to investigate the relationship between risk perception, knowledge, risk attitude, and health promoting behaviors of nursing college students. The data were collected from 168 university students of four-year nursing college in the city of D, C. The collected data were analyzed by independent t-test, one way ANOVA and Pearson correlation coefficient using SPSS WIN 20.0 program. As a result this study knowledge of fine dust was statistically significant in respiratory disease(t=1.92, p<.001). The risk attitude toward fine dust was statistically significant in respiratory diseases(t=2.05 p=.042), subjective health status(F=3.79, p = .012). There was a significant positive correlation between risk perception of fine dust and knowledge(r=.340, p<.001), risk attitude(r=.492, p<.001), and health promoting behaviors(r=.354, p<.001). Knowledge of fine dust and risk attitude(r=.401, p<.001), health promoting behavior(r=.296, p<.001), risk attitude toward fine dust and health care behaviors(r=.550, p<.001) also showed a statistically significant positive correlation. Based on these results, it will be necessary to develop a program to improve awareness and knowledge of fine dusts in nursing college students and to improve health promoting behaviors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.171-187
• /
• 2023

Objectives: Aircraft cabin cleaning work is characterized by being performed within a limited time in a narrow and enclosed space. The objective of this study was to evaluate the exposure levels to dust, ultra fine dust(PM2.5) and black carbon(BC) among aircraft cabin cleaners. Methods: Active personal air sampling for respirable dust(n=73) and BC(n=47) was conducted during quick transit cleaning(cabin general and vacuum-specific) and seat cover replacement and total dust and PM2.5 were area-air-sampled as well. Also, size distribution of particle was identified with the cleaning workers targeted. Dusts were collected with PVC filters using gravimetric analysis. The concentration of PM2.5 and the particle size distribution were measured with real-time direct reading portable equipment using light scattering analysis. The concentration of BC was measured by aethalometer(filter-based real-time light absorption analysis instrument). Results: The geometric mean of respirable dust was the highest at vacuum cleaning as 74.4 ㎍/m³, following by replacing seat covers as 49.3 ㎍/m³ and cabin general cleaning as 47.8 ㎍/m³ . The arithmetic mean of PM2.5 was 4.83 ~ 9.89 ㎍/m³ inside the cabin, and 28.5~44.5 ㎍/m³ outside the cabin(from bus and outdoor waiting space). From size distribution, PM_2.5/PM₁₀ ratio was 0.54 at quick transit cleaning and 0.41 at replacing seat covers. The average concentration of BC was 2~7 ㎍/m³, showing a high correlation with the PM2.5 concentration. Conclusions: The hazards concentration levels of aircraft cabin cleaners were very similar to those of roadside outdoor workers. As the main source of pollution is estimated to be diesel vehicles operating at airports, and it is necessary to replace older vehicles, strengthen pollutant emission control regulations, and introduce electric vehicles. In addition, it is necessary to provide as part of airport-inftastructure a stable standby waiting space for aircraft cabin cleaners and introduce a systematic safety and health management system for all workers in the aviation industry.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.390-397
• /
• 2023

Introduction: Biological risks are a major global problem in the workplace. The recent COVID-19 pandemic has highlighted the need for a more comprehensive understanding of the biological risks at work. This study presents data on both communicable infectious biological agents and noncommunicable factors leading to death and disability for the year 2021. Methods: We followed the methodology established by the International Labour Organization (ILO) in their past global estimates on occupational accidents and work-related diseases. We used relevant ILO estimates for hazardous substances and related population attributable fractions derived from literature, which were then applied to World Health Organization mortality data. The communicable diseases included in the estimates were tuberculosis, pneumococcal diseases, malaria, diarrheal diseases, other infectious diseases, neglected tropical diseases, influenza associated respiratory diseases and COVID-19. Noncommunicable diseases and injuries considered were Chronic Obstructive Diseases (COPD) due to organic dusts, asthma, allergic reactions and risks related to animal contact. We estimated death attributable to biological risk at work and disability in terms of disability adjusted life years (DALYs). Results: We estimated that in 2022, 550,819 deaths were caused by biological risk factors, with 476,000 deaths attributed to communicable infectious diseases and 74,000 deaths caused by noncommunicable factors. Among these, there were 223,650 deaths attributed to COVID-19 at work. We calculated the rate of 584 DALYs per 100,000 workers, representing an 11% increase from the previous estimate of the global burden of work-related disabilities measured by DALYs. Conclusion: This is a first update since previous 2007 ILO estimates, which has now increased by 74% and covers most biological risks factors. However, it is important to note that there may be other diseases and deaths are missing from the data, which need to be included when new information becomes available. It is also worth mentioning that while deaths caused by major communicable diseases including COVID-19 are relatively rare within the working population, absences from work due to these diseases are likely to be very common within the active workforce.

• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.217-235
• /
• 2012

We evaluated the geochemical characteristics and their potential pollution of Asian Dusts in Daejeon, Korea during spring 2007. Compared with the chemical compositions of soils in source area of Asian Dust, those of aerosols in Daejeon were enriched with trace elements (ten to hundred fold), inferring that pollutants from China have affected on local environment in adjoining country such as Korea. Chemical analysis of aerosols during Asian dust showed that fine particles ($PM_{2.5}$) contained high contents of trace elements such as Cr, Cu, Pb, Zn, V, S, As, Cd, Co, Ni, Mo, Sb, Cs, Rb, Th, Sc and Y. In the case of TSP (Total Suspended Particle), Zr, Sr, Ba, Li, Th and U were contained much more than other trace elements. The contents of some elements (i.e. Li, Cs, Co, U, Cr, Ni, Rb, V, Th, Y, Sr and Sc) in aerosols collected in Asian Dust period, which are not likely enriched by air pollutants, were higher (2 - 4.2 fold) than those in Non Asian Dust period, indicating that these elements could be used as indicator elements for determining the occurrence of Asian Dust phenomena (especially, Sr, V, Cr & Li). In the case of Asian Dust coming through the big cities and/or industrial areas of China, the domestic aerosols had higher contents of trace elements (such as S, Cd, Zn, Pb, Cu, Mo and As) than those from Northeastern China via North Korea, indicating that the transportation courses of air mass are very important to determine the pollution degrees. Using the enrichment factors of trace elements in aerosols during Asian Dust and Non Asian Dust, we identified that some elements (i.e. S, Zn, Cu, Pb, As, Mo and Cd) were most problematic in terms of environmental hazard aspects, and these elements could affect adverse effects on human health as well as ecosystem and surface environment (soil and water) through long-lived precipitation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.392-404
• /
• 2015

Objectives: This study measured and analyzed the concentrations of crystalline silica, elemental carbon and the contribution ratio of pollutants which influence environmental and respiratory disease around the Ansim Briquette Fuel Complex in Daegu, Korea. Methods: We analyzed the crystalline silica and elemental carbon in the air according to FTIR(Fourier Transform Infrared Spectroscopy) and NIOSH(National Institute of Occupation Safety and Health) method 5040, respectively. In addition, lead stable isotopes, and carbon and nitrogen stable isotopes were analyzed using MC-ICP/MS(Multi Collector-Inductively Coupled Plasma/Mass Spectrometer), and IRMS(Isotope Ratio Mass Spectrometer), respectively. Results: The concentration of crystalline silica in the direct exposure area around the Ansim Briquette Fuel Complex was found to be $0.0014{\pm}0.0005mg/Sm^3$, but not to exceed the exposure standards of the ACGIH(American Conference of Governmental Industrial Hygienists). In the case of the autumn, the direct exposure area was found to show a level 2.5 times higher than the reference area, and on the whole, the direct exposure area was found to have a level 1.4 times higher than the reference area. The concentration of elemental carbon in the direct exposure area and in the reference area were found to be $0.0014{\pm}0.0006mg/Sm^3$, and $0.0006{\pm}0.0003mg/Sm^3$, respectively. This study confirmed the contribution ratio of coal raw materials to residentially deposited dusts in the area within 500 meters from the Ansim Briquette Fuel Complex and the surrounding area with a stable isotope ratio of 24.0%(0.7-62.7%) on average in the case of carbon and nitrogen, and 33.9%(26.6-54.1%) on average in the case of lead stable isotopes. Conclusions: This study was able to confirm correlations with coal raw materials used by the Ansim Briquette Fuel Complex and the surrounding area. The concentration of some pollutants, crystalline silica, and elemental carbon emitted to the direct-influence area around the Ansim Briquette Fuel Complex were relatively higher than in the reference area. Therefore, we need to impose continuous and substantive reduction countermeasures in the future to prevent particulate matter and coal raw materials in the study area. It is time for the local government and authorities to prepare active administrative methods such as the relocation of Ansim Briquette Fuel Complex.