• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1350-1357
• /
• 2010

In tunnelling, temporary ventilation is very important factor in the safety of worker and the work efficiency which is affected by visibility. There are a lot of problems in the recent tunnel construction, because the longer the tunnel, the more the present design doesn't satisfy the allowable standard about dust and air pollution. Especially, In case the length of tunnel is more than 1,000m, the ventilation efficiency tends to decrease. In this study, the field measurement of the degree of contamination was performed near the face of tunnel. Based on the results obtained, the main factors of problem in temporary ventilation are the difference of temperature between outside and inside, the rate of leakage of ventilation duct and the dust and so on. It maybe helpful to the solution of problems, and also the accurate ventilation estimate.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.468-474
• /
• 2005

SOx and NOx are known major precursors of acid rain and thus the abatement of their emissions is a major target in air pollution control. To obtain basic data on the removal process of simultaneous $SO_2/NO$, the optimal reaction condition and the composition of reaction solution for simultaneous removal of $SO_2/NO$, ware investigated using a bubble column reactor. Pilot scrubber was consisted of scrubber, filter and control box. Dust removal rate was 83, 92, and 97% with catalyst flux of 0.5, 0.8, 1.5 L/min, respectively Average dust removal efficiency with a kind of nozzle was about 94 and 90% in STS FF6.5 (5/8in.) and 14 of P.P W(1.0in.), respectively Dust and $SO_2$ were removed more than 98-96% regardless of reactor number. In the case of NO gas, removal yield of 83.3% was achieved after 48 hours in 1 stage, also removal yield of 95.7% was reached in 2 stages. In tile case of application of STS (5/8 in.) and P.P (1.0 in.) as used fill packing, removal efficiency was reached higher than 98% without related to of kind of fill packing.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.61-64
• /
• 2003

This study was conducted to investigate the chemical characteristics of $PM^{10}$ at Anmyeon-do during the periods from January 1998 to December 2001. The $PM^{10}$ samples ($PM^{10}$) were collected by High Volume Air sampler (HVAS). The measured items were mass concentration of $PM^{10}$ with the major ions ($Cl^{-}$, ${SO_{4}}^{2-}$, ${NO_3}^{-}$, ${Mg}^{2+}$, ${Ca}^{2+}$, ${K}^{+}$etc.) and metallic elements (AI, Fe, Mn, Cr, Zn, Pb etc.). The chemical analysis of major ion components were made by Ion Chromatography (DX-500) and that of metallic elements were made by Inductively Coupled Plasma Spectrometer (ICP-AES, ICP-Mass). The average mass concentration of $PM^{10}$ increased substantially during the heavy dust periods (Asian Dust cases). For water-soluble ions, concentrations of ${Ca}^{2+}$, ${SO_{4}}^{2-}$ and ${NO_3}^{-}$ were remarkably enhanced. Concentrations and mass fraction of crustal elements such as Na, Mg, Ca, Fe, Mn were highly elevated, but those of pollution-derived heavy metals were appreciably decreased. The factor analysis was conducted in order to make the large and diverse data set as manageable levels and to qualitatively examine the relationship between the variables.

• Journal of Veterinary Science
• /
• v.23 no.2
• /
• pp.23.1-23.15
• /
• 2022

Background: Antibacterial agents play important roles in the treatment of bacterial infections. However, the development of antimicrobial resistance (AMR) and carry-over of substances into the environment are several problems arising during oral treatment of bacterial infections. We assessed AMR development in commensal Escherichia coli (E. coli) in enrofloxacin treated and untreated animals. In addition, we examined fluoroquinolone in the plasma and urine of treated and untreated animals, and in sedimentation dust and aerosol. Methods: In each trial, six pigs were treated with enrofloxacin via powder, granulate or pellet forms in two time periods (days 1-5 and 22-26). Four pigs served as untreated controls. The minimum inhibitory concentration (MIC) was determined to evaluate AMR development. Analysis of enro- and ciprofloxacin was performed with high performance liquid chromatography. Results: Non-wildtype E. coli (MIC > 0.125 ㎍/mL) was detected in the pellet treated group after the first treatment period, whereas in the other groups, non-wildtype isolates were found after the second treatment period. E. coli with MIC > 4 ㎍/mL was found in only the pellet trial. Untreated animals showed similar susceptibility shifts several days later. Bioavailability differed among the treatment forms (granulate > pellet > powder). Enro- and ciprofloxacin were detected in aerosols and sedimentation dust (granulate, powder > pellet). Conclusions: This study indicates that the kind of the oral dosage form of antibiotics affects environmental contamination and AMR development in commensal E. coli in treated and untreated pigs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.74-75
• /
• 2021

In the recent 2017 annual average fine dust concentration (PM2.5) statistics released by the Organization for Economic Cooperation and Development (OECD), Korea has a high concentration of 25.14㎍/m3, which is about twice the average of 12.5㎍/m3 in OECD countries. Fine dust (PM2.5) is the main source of secondary pollutant production by the reaction of primary pollutants emitted from automobiles and thermal power plants, mainly composed of sulfates, nitrates, and organic carbon. The permeable block is an eco-friendly product that prevents rainwater from collecting on the surface of the road because it does not penetrate the groundwater properly, and is widely constructed on sidewalks or parking lots to recharge groundwater in case of rain. In addition, the pavement of the permeable block is a fundamental solution to reduce pollution by preventing rainwater from flowing into the stream, and it also has the advantage of easy replacement as well as low replacement costs. Therefore, this study was a basic experiment to produce permeable blocks mixed with TiO2 and diatomite to improve indoor air quality, and intended to analyze the flexural strength and compressive strength of permeable blocks mixed with TiO2.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.516-538
• /
• 2020

The present study investigated regional and sex differences in knowledge, perception, cognition and behavior of fine-dust protective masks for periods of high concentration of fine dust in Korea. A total of 2,012 adults from seven provinces responded to the questionnaire. The results (all p<.05) showed that 78% of respondents considered pollution from China to be the greatest contributor of fine dust. Seoul and Gyeonggi residents more frequently checked fine dust forecasts than other provinces and consulted their smartphone applications to do so more than other residents. Jeju, Gwangwon, and Jeonla residents had less knowledge of KF 80, 94, and 99 masks than residents of other provinces. Gwangwon and Jeju residents had less trust in the effectiveness of protective masks than other residents. Females perceived themselves as unhealthier respiratory, more frequently checked the concentration of fine dust, trusted more the effectiveness of masks, and more frequently wore masks, compared to male respondents. Those who self-identified their respiratory function as poor, more frequently checked fine dust forecasting, and had greater knowledge of masks, which resulted in greater trust in the protective function of masks, and finally had higher wear frequency of masks for days with high concentrations of fine dust.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.214-222
• /
• 2022

In these proceedings, we will address the problem of air pollution on the premises of the Cement factory SHARRCEM L.L.C. in Hani Elezit in the Republic of Kosovo respectively around the clinker cooler, rotary kiln, and raw material mill. By air pollution, we mean the introduction of chemicals, particles, or other harmful materials into the atmosphere which in one way or another causing damage to the development of plants and organisms. Air pollution occurs when certain substances are released into the air, which depending on the quantitative level, can be harmful to human health, animals, and the environment in general. The analysis of air shows the influence of the extractive and processing industry on the chemical composition of air. Parameters analyzed though under control such as the case of carbon dioxide, due to the increasing production capacity of cement, the production of hundreds of thousands of cubic meters of CO₂ gas made CO₂ production a concern. With the purchase of the latest technology by the SHARCEM Factory in Hani Elezit, the amount of air pollution has been reduced and the allowed parameters of environmental pollution have been kept under control. Air pollutants are introduced into the atmosphere from various sources which change the composition of the atmosphere and affect the biotic environment.The concentration of air pollutants depends not only on the quantities that are emitted from the sources of air pollution but also on the ability of the atmosphere to absorb or disperse these emissions. Sources of air pollutants include vehicles, industry, indoor sources, and natural resources. There are some natural pollutants, such as natural fog, particles from volcanic eruptions, pollen grains, bacteria, and so on.

• Hwankyungkyoyuk
• /
• v.2 no.1
• /
• pp.92-99
• /
• 1991

According to our secondary school curriculum for natural science and technical circles, there be used 353 of chemical reagents including 24 kinds of harmful and toxicant components. At present, most school are discharging their school laboratory waste water without any chemical and physical treatments. So as to solve the environmental problem for water pollution, this study tried to research a kind of adsorbant utilizing saw dust, wasted wood sources and designed the simple processing system using the adsorbent. This adsorbent was made by extracting lignin substances from raw saw dust under the solution of 0.5N-NaOH at the temperature of $100^{\circ}C$. Their metal removed rates was measured not only by processing of column and vessel. but also by comparing the standard solution and real waste water. The results were proved as more than 90(%) of the adsorptive efficiency on the average from Pb, Cd, Cu except Cr(VI)in case of the school experimental waste water soaked in vessels a long with 4g of the adsorbent for 24 hours. The new processing system enables to remove most harmful and toxicant metals by filtering, sedimenting and adsorbing at the low cost.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.156-157
• /
• 2021

Since concrete is contaminated or radioactive during operation of nuclear power plants, it is the most important radioactive waste generated during the dismantling of a nuclear power plant. The amount of waste is different depending on the pollution state of each facility and the applied technology is different, so there is a big difference. We aim to reduce the amount of waste and increase the value of recyclability through technology to remove radionuclides attached to the surface. For this purpose, laser scabbling, which exfoliates the surface of concrete by irradiating a laser, and a facility system for controlling dust and dust are used in parallel. The purpose of this study is to evaluate the efficiency of laser scabbling by manufacturing simulated concrete for nuclear facilities, and to review the optimal mixing design conditions for nuclear facility structures.

• Journal of Platform Technology
• /
• v.11 no.6
• /
• pp.28-33
• /
• 2023

With the development of the beauty industry, the nail art industry is expanding, and through this, nail culture is becoming more popular. However, some products used in the nail art field may produce harmful substances, so great caution is required. In this paper, an air purification system was designed to reduce harmful air. The air purification system uses a harmful gas sensor to measure the level of pollution in the surrounding air and then turns the fan on/off to remove harmful gases and fine dust. Two types of filters and two fans can be driven and controlled respectively so that harmful gases are absorbed into the charcoal filter and fine dust is absorbed into the HEPA filter. In addition, filters, fans, and piping were appropriately placed to remove contaminated surrounding air as quickly as possible during nail procedures.