• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.122-129
• /
• 2017

Objectives: Most of the $PM_{10}$ in subway stations is spread by the train-induced wind from the tunnels. Therefore, in order to improve air quality in subway stations, it is important to remove the $PM_{10}$ from the tunnels. After the installation of PSD (platform screen doors), the influence of train-induced wind and $PM_{10}$ at the platform has decreased, but is estimated to have increased in subway tunnels. This study was conducted to investigate the control of $PM_{10}$ in subway tunnels by applying a 500-fold diluted solution mixed with a humectant using a natural polymer. Methods: For this purpose, we tested the dust reduction effect in a laboratory and corrosion test and water pollution using fish and aquatic plants for the natural dust collecting agent. In the tunnel of a subway station, we used the natural dust collecting agent over 15 days. The study was carried out on $PM_{10}$ control during operation, which accounts for more than 70% of subway dust. Results: As results, the natural dust collecting agent exhibited an excellent dust control effect, and it was safe for water quality and soil. It showed the effect of controlling $PM_{10}$ in the subway tunnel by 49.5- 64.7% over 15 days. The use of the dust collecting agent for the control of $PM_{10}$ could be confirmed in the subway. Conclusion: It is necessary to clearly explain the major portions of chemical components contained in $PM_{10}$ to figure out the characteristics of $PM_{10}$ and to develop effective reduction measures to decrease the adverse effects of $PM_{10}$ in the subway.

• Smart Media Journal
• /
• v.7 no.3
• /
• pp.22-28
• /
• 2018

Air pollution problems in Korea are gradually becoming a higher concern due to various reasons such as fine dust, causing anxiety among people with regard to their health. Although various studies have been carried out on the relationship between the influence of fine dust and a certain disease, they are mostly focusing on the analyzation that fine dust is related to specific illnesses such as respiratory and cardiovascular diseases, hypertension and diabetes. In this paper, we utilize the public data of medical history information to extract ten medical care subjects with the highest number of monthly care in 2016, and analyze the relation of fine dust with certain medical subjects using Pearson correlation coefficient. We also subdivide and analyze the correlation between fine dust and the medical subjects according to their gender and age. Middle-aged Female group with the strongest positive correlation between fine dust and the medical subjects is analyzed with the correlation from 2011 to 2015, with its relevance coefficient extracted by regression analysis in order to predict the correlation with the medical subjects according to the fine dust concentration.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.119-128
• /
• 2020

An ultrasonic multiple scattering simulation using cross-section of fine dust particles were proposed. These days, along with awareness of air pollution, social interest in fine dust is increasing. In the construction field, awareness of fine dust is increasing, and research on preparing various countermeasures is underway. The light scattering method fine dust meter currently in use is affected by environmental factors such as relative humidity, and reliability problems in terms of accuracy are continuously reported. However, the transmission of ultrasonic waves can directly reflect the physical change of the medium based on the mechanical wave. Using these advantages of ultrasonic waves, fine dust measurement simulation was performed using the scattering cross section and ultrasonic multiple scattering theory. The shape data of the fine dust particles were collected using a SEM (Scanning Electron Microscope), and a cross-section according to the fine dust particles was derived through numerical analysis. As a result of signal processing, the error for the number density corresponding to each cross-section is minimum 19, maximum 3455.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.140-145
• /
• 2022

In an advanced modern society, among air pollutants caused by urban industrialization and public transportation, fine dust flows into indoors from the outdoors. The fine dust meter used indoors provides limited information and measures the pollution level differently, so there is a problem that users cannot monitor and monitor the data they want. To solve this problem, in this paper, indoor air quality data fine dust and ultra-fine dust (PM1.0, PM2.5, PM10), VOC (Volatile Organic Compounds) and PIR (Passive Infrared Sensor) are used to measure fine dust. and a monitoring system were designed and implemented. We propose a fine dust meter and monitoring system that is installed in a designated area to measure fine dust in real time, collects, stores, and visualizes data through App Engine of Google Cloud Platform and provides it to users.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.55-56
• /
• 2006

This thesis describes the use of measured aerosol size distributions and size-resolved hygroscopic growth to examine the physical and chemical properties of several particle classes. The primary objective of this work was to investigate the optical and cloud forming properties of a range of ambient aerosol types measured in a number of different locations. The tool used for most of these analyses is a differential mobility analyzer / tandem differential mobility analyzer (DMA / TDMA) system developed in our research group. To collect the data described in two of the chapters of this thesis, an aircraft-based version of the DMA / TDMA was deployed to Japan and California. The data described in two other chapters were conveniently collected during a period when the aerosol of interest came to us. The unique aspect of this analysis is the use of these data to isolate the size distributions of distinct aerosol types in order to quantify their optical and cloud forming properties. I used collected data during the Asian Aerosol Characterization Experiment (ACE-Asia) to examine the composition and homogeneity of a complex aerosol generated in the deserts and urban regions of China and other Asian countries. An aircraft-based tandem differential mobility analyzer was used for the first time during this campaign to examine the size-resolved hygroscopic properties of particles having diameters between 40 and 586 nm. Asian Dust Above Monterey (ADAM-2003) study was designed both to evaluate the degree to which models can predict the long-range transport of Asian dust, and to examine the physical and optical properties of that aged dust upon reaching the California coast. Aerosol size distributions and hygroscopic growth are measured in College Station, TX to investigate the cloud nucleating and optical properties of a biomass burning aerosol generated from fires on the Yucatan Peninsula. Measured aerosol size distributions and size-resolved hygroscopicity and volatility were used to infer critical supersaturation distributions of the distinct particle types that were observed during this period. The predicted CCN concentrations were used in a cloud model to determine the impact of the different aerosol types on the expected cloud droplet concentration. RH-dependent aerosol extinction coefficients are calculated at a wavelength of 550 nm.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.21-27
• /
• 2003

The purpose of this study was to investigate the distribution and characteristics of heavy metals in the fallout dust deposits at the middle and high schools. We collected the samples at 60 schools in Kongju, Incheon and Daejeon on from September to November, 2001, and analyzed Cadmium(Cd), Copper(Cu), Lead(Pb) and Zinc(Zn) from them. Zn was the highest level as 551 $\pm$ 79.9 ppm, and the next order were Pb, Cu, and Cd as 146.0 $\pm$ 15.2 ppm, 98.7 $\pm$ 14.4 ppm and 5.21 $\pm$ 0.76 ppm, respectively. The rates of schools exceeding the soil environmental standards were 56.3% in Cd, 53.3% in Zn, 51.5% in Pb, and 31.7% in Cu, respectively. Cd and Pb were the highest levels at schools in Daejeon as 6.30 $\pm$ 0.87 ppm and 171 $\pm$ 26.1 ppm, respectively. Cu and Zn were the highest levels at schools in Incheon as 176.2 $\pm$ 55.8 ppm and 919.8 $\pm$ 185.7 ppm, respectively. At Incheon, Cu and Zn levels were significantly higher than Kongju(p=0.04l), and Daejeon(p=0.016), respectively. Total pollution index(PI) of heavy metals was 1.51 $\pm$ 0.16. PI was 2.00 $\pm$ 0.51 on Incheon, 1.50 $\pm$ 0.13 on Daejeon, and 0.92 $\pm$ 0.24 on Kongju. Correlations were 0.675 (p<0.05) between Cu and Cd, 0.663(p<0.05) between Cu and Zn, and 0.477 between Cd and Pb. In conclusion, Among heavy metals in the fallout dust deposits at schools, Cu and Zn were the highest levels at Incheon, Cd and Pb were the highest levels at Daejeon.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.279-284
• /
• 2009

Traditionally, so-called "industrial waste gases", such ad exhaust from boilers at industrial installations and a large quantity of soot discharged from power station, before their release into the atmosphere, have been on occasion subjected to an air cleaning process to remove fine particles that may pollute the atmosphere (such as mist and dust containing various powdery or oily substances and moisture from industrial waste gases). The release of industrial waste gases containing these particles directly into the atmosphere poses a serious threat to the earth environment; and recovery of these noxious substances is required by law in some countries and local governments. in urban areas, air pollution from automobile exhaust and others creates a serious condition. Some homes are equipped with and use indoor air purifiers. In many of the kitchens of restaurants, smoke generated during cooking and otherwise contaminated air are cleansed by air purifiers before being released outside or recycled inside. For the dust collecting devices to recover the fine particles contained in contaminated air, the cause for air pollution and how to purify air, many types based on various principles are known. Specifically, classified based on theories of particle collection, filtration, gravity, inertia, centrifugation, electricity, and cleaning types are cited as available processes. Among them, an appropriate type is selected according to the size or type of fine particles to be collected and conditions for installation. For the efficiency of dust collection, a filtration system (by using bag filters and others) and electric system are particularly outstanding and are therefore used widely in various areas of industry. In this research, rotary type high performance oil mist and smoke collecting system with self auto cleaning device equipped with the cleaning fluid spraying section is investigated.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.E1
• /
• pp.1-14
• /
• 2004

Meteorological mechanisms in association with long-range transport of Asian dust in April 2001 have been investigated using weather maps, satellite images, TOMS and surface $PM_{10}$ data, backward trajectories, plus modeling output results (geopotential heights, horizontal wind vectors, potential temperatures, and streamlines). The results indicated that long -range transport of Asian dust to the west coast of North America was associated with strong westerlies between the Aleutian low and the Pacific high acting as a conveyor belt. Accelerating westerly flows due to cyclogenesis at the source regions over East Asia transported pollution from the continent to the central Pacific. When the system reached the Aleutian Islands, the intensity of troughs and the westerlies were amplified in the North Pacific. Thereafter the winds between the Aleutian Islands and the Pacific Ocean were more intensified from the air flow transport of the conveyor belt. Consequently, the strong wind in the conveyor belt enhanced the dust transport from the Pacific Ocean to the west coast of North America. This was evidenced by $PM_{10}$ concentration (maximum of about $100{\mu}g\;m^{-3}$) observed In California. Further evidence of the dust transport was found through the observation of satellite images, the distribution of TOMS aerosol index, and the analyses of streamlines and backward trajectories.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.55-60
• /
• 2009

This study was carried out to propose the optimum technologies that can be applicable to noise and fugitive dust controlling in construction sites by comparative analysis in cases. The ninety three environmental management technologies applied to fifty-five construction projects conducted during 2005~2007 in Korea were analyzed by checklist method. The construction companies paid more attention to the noise and fugitive dust controlling technologies than the waste and wastewater. The diverse pollution controlling techniques were applied to the architectural projects than the civil projects to meet the environmental requirements in residential area. The fugitive dust controlling technologies(75.3%) were more widely applied to all construction projects than the noise controlling technologies(24.7%). As the noise controlling techniques, the noise barriers in wall-form which are set up as boundary in construction site were more widely used than the noise barriers in curtain-form, in cabin and silencers. Water spraying systems, wind barriers and mechanical sweepers were the preferred technologies for controlling fugitive dust emission.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1390-1399
• /
• 2007

Samples of 45 school dust were collected in Daegu in January 2007, were sieved below 100 ${\mu}m$, and 14 elements were analyzed using ICP after an acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that dust from playground were influenced by natural sources, while dust from classroom were influenced by urban anthropogenic sources. The measured values were remarkably higher in components from natural sources than in components from urban anthropogenic sources. Dust from classroom are highly concentrated than those from playground. Concentrations of dust in urban area are similar to those of dust in rural area and there was no significant difference in concentrations between classroom with playground soil and classroom with play-ground grass. Compared with other cities in Korea, concentrations of heavy metals in Daegu city were higher in classroom and lower in playground than those of heavy metals in other cities. Dust from classroom contained lower concentrations of trace elements than those from street in Daegu. Results of pollution indices of heavy metals indicated that playground was not contaminated with heavy metals and classroom was considered to be highly contaminated. No appreciable differences in playground were found between urban and rural areas but in case of classroom pollution, heavy metal concentrations were a little bit higher in urban areas than in rural areas. The correlation analysis among trace elements indicated that components in playground were significantly correlated, while components in classroom were less correlated. Trace element components of classroom dust were not significantly affected by those of playground dust.