• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1187-1197
• /
• 2013

The result of a small electrostatic precipitator which is in order to decrease indoor air pollution for optimal efficiency was shown as follows. Although the closer distance between the discharge electrode and dust collecting electrode shows the better throughput efficiency by forming strong electrostatic Field, it does not have profound impact in case of optimal dust collecting area. G.P(gas passage) which is the distance from dust collecting electrode to dust collecting electrode is a crucial factor to decide dust collecting efficiency. The narrower distance of G.P shows the better throughput efficiency whereas it decreases when the distance is too narrow since sparks ensue by increasing the capacity of electrostatic charging system 5 mm regards as optimal efficiency in this experiment. Although the higher voltage shows the higher dust collecting efficiency overall, the experiment was not able to keep performing since the sparks which decrease dust collecting efficiency ensue over 40 kV. The efficient and safe voltage state is considered 3.6 kV in this experiment. The most crucial factor for dust collecting efficiency of an electrostatic precipitator which is in order to decrease indoor air pollution is applied voltage. In addition, optimal raw gas flow rate(2.4 m/sec) is more important factor than the excessive increase of dust collecting area.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.82-88
• /
• 2004

In this study, an intelligent solenoid valve controller has been developed for efficient maintaining of filters in a dust collecting system. This controller has automatic controllability of solenoid valves' ON/OFF time depending on the clogging status of filters, and then it can extend the filters' lifetimes, decrease the power consumption, and make effective operation of the system possible. This controllability has been executed by the fuzzy theory that utilizes the workers' experimental knowledges, the control expert's knowledges and the differential pressures between the inlets and outlets measured by the sensors. The system's operation is under the continuous surveillance by using a current transformer, which warns the operators and lets them take necessary actions in case of abnormal operation.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.404-412
• /
• 2017

A centrifugal cyclone dust collecting apparatus includes a hydro cyclone dust collecting apparatus for separating solid or liquid using liquid or suspension as a medium. In this study, the formation mechanism and improvement of air core and inner air layer were confirmed through Particle Image Velocimetry. These results showed that the modified experimental model was designed in the conventional method suitable for the separation of juvenile fish and eggs. The inlet speed of the multi-stage hydrocyclone dust collector, which can increase the inlet velocity and minimize floatage in the turbulence chamber, was increased from 0.15 to 0.30 m/s. As a result, the air core was stably formed, the inner air layer was increased with increasing speed. In addition, the dust collecting efficiency of egg and juvenile fish was 97.8% on average, It can infer that this system confirmed the ability to efficiently collect particles of $40{\mu}m$ or more.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.47-52
• /
• 2021

Fine dust generated from vehicle brakes accounts for a significant amount of fine dust from non-exhaust system. Since such brake fine dust contains a large number of heavy metal components that are fatal to the human body, a device capable of collecting them needs to be developed. A mini cyclone, one of the devices that can effectively collect fine dust, has the advantage of relatively simple shape and high collection efficiency. Therefore, in this study, the collection efficiency of the mini-cyclone was numerically analyzed using CFD in order to find out whether such a mini-cyclone is suitable for collecting brake fine dust. As a result, the cut-off diameter was predicted to be about 1.5㎛, which means that the particle trapping load of the filter can be drastically reduced. Therefore, there is a possibility that the mini-cyclone can be used to collect fine dust from disc brakes.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.279-284
• /
• 2009

Traditionally, so-called "industrial waste gases", such ad exhaust from boilers at industrial installations and a large quantity of soot discharged from power station, before their release into the atmosphere, have been on occasion subjected to an air cleaning process to remove fine particles that may pollute the atmosphere (such as mist and dust containing various powdery or oily substances and moisture from industrial waste gases). The release of industrial waste gases containing these particles directly into the atmosphere poses a serious threat to the earth environment; and recovery of these noxious substances is required by law in some countries and local governments. in urban areas, air pollution from automobile exhaust and others creates a serious condition. Some homes are equipped with and use indoor air purifiers. In many of the kitchens of restaurants, smoke generated during cooking and otherwise contaminated air are cleansed by air purifiers before being released outside or recycled inside. For the dust collecting devices to recover the fine particles contained in contaminated air, the cause for air pollution and how to purify air, many types based on various principles are known. Specifically, classified based on theories of particle collection, filtration, gravity, inertia, centrifugation, electricity, and cleaning types are cited as available processes. Among them, an appropriate type is selected according to the size or type of fine particles to be collected and conditions for installation. For the efficiency of dust collection, a filtration system (by using bag filters and others) and electric system are particularly outstanding and are therefore used widely in various areas of industry. In this research, rotary type high performance oil mist and smoke collecting system with self auto cleaning device equipped with the cleaning fluid spraying section is investigated.

• Journal of Platform Technology
• /
• 제8권4호
• /
• pp.59-69
• /
• 2020

최근 초미세먼지 및 미세먼지에 대한 심각성은 국가적 차원의 재난으로 대두되고 있으나 지방 중소도시는 면적에 비해 미세먼지 측정소가 부족하여 미세먼지관리가 어려운 측면이 있다. 미세먼지 데이터의 수집과 처리를 위한 컴퓨팅자원은 규모가 크지않지만 데이터를 공유를 위하여 클라우드와 민간 및 공공데이터를 활용하는 것이 필요하다. 본 논문에서는 미세먼지 및 초미세먼지 그리고 온·습도를 측정하여 이를 처리하여 미세먼지 실시간 관제와 대국민서비스할 수 있는 소형 엣지컴퓨팅 시스템을 제안하였다. 미세먼지 데이터의 수집과 공공 및 민간데이터를 활용하여 미세먼지 등급을 서비스하는 것은 데이터양이 크지 않고 처리부하가 크지 않기 때문에 라즈베리파이를 이용한 엣지컴퓨팅으로 처리하는 것이 효율적이다. 실험을 위하여 3가지 센서와 라즈베리파이 그리고 Thinkspeak를 이용하여 실험시스템을 구성하였으며 경북북부권지역에 대한 미세먼지 측정을 실험하였다. 실험결과 민간의 GIS데이터 기반에 시간에 따른 측정된 미세먼지 측정결과가 정확하게 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.470-472
• /
• 2006

Sensor networks are the results of convergence of very important technologies such as wireless communication and micro electromechanical systems. In recent years, sensor networks found a wide applicability in various fields such as environment and health, industry scene system monitoring, etc. A very important step for these many applications is pattern classification and recognition of data collected by sensors installed or deployed in different ways. But, pattern classification and recognition are sometimes difficult to perform. Systematic approach to pattern classification based on modem learning techniques like Multivariate Gaussian mixture models, can greatly simplify the process of developing and implementing real-time classification models. This paper proposes a new recognition system which is hierarchically composed of many sensor nodes having the capability of simple processing and wireless communication. The proposed system is able to perform context classification of sensed data using the Multivariate Gaussian function. In order to verify the usefulness of the proposed system, it was applied to intelligent dust collecting system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.715-717
• /
• 1999

In this study, an intelligent solenoid valve controller has been developed for automatic maintaining of filters in a dust collecting system. This controller has automatic controllability of solenoid valves' ON/OFF time depending on the clogging status of filters, and then it can extend the filters' lifetimes, decrease the power consumption, and make effective operation of the system possible. This controllability has been executed by the fuzzy theory that utilizes the workers' experimental knowledges, the control expert's knowledges and the differential pressures between the inlets and outlets measured by the sensors.

• 한국토양환경학회지
• /
• 제2권1호
• /
• pp.109-117
• /
• 1997

60년대 이후 우리나라에 새로운 주거양식으로 정착된 아파트내 설비의 일부였던 쓰레기 투입구(Dust Chute)는 여러 사회적인 논의를 거쳐 폐쇄되었고, 이제는 신도시에서 조차도 찾아볼 수 없는 낡은 유물이 되고 말았다. 현재는 주택 옥외공간에 별도의 집하장소를 만들어 수거해가는 방식으로 대응하고 있는데, 그럴수밖에 없었던 주된 이유는 분리수거가 제대로 이뤄지지 않은데 기인한 것으로 분석된다. 95년초부터 전국적으로 실시된 쓰레기종량제는 우리나라의 쓰레기 처리 분야에 있어 생활쓰레기의 분리수거 및 재활용을 가능케하는 제도로 자리잡고 있다. 인간들은 또 그린라운드 시대에 걸맞는 주거환경의 질을 추구하고 있다. 이러한 사회적 변화에 대응한 여러 노력이 쓰레기 수거운반 분야에서도 이뤄질 수 있다고 본다. 이미 택지개발 등으로 새로 조성되는 주거단지에는 지역난방시스템과 쓰레기소각장, 공동구 등이 도입 활용되고 있으며, 바로 이들 시설과도 밀접한 연관성이 있는 각국의 쓰레기 수거운반 방식을 비교하고, 선진 각국의 신도시와 주요 대형시설에 도입 활용되고 있는 방식인 관로내 공기를 이용한 쓰레기 수거운반 시스템(Pneumatic Waste Collection System)의 적용사례 및 그의 실용성에 대하여 연구하기로 한다.