• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.5-13
• /
• 2005

In order to evaluate the credibility of the welded joint design for combat vehicle using A12519, the numerical analysis for the joint model has been studied and the results are compared with the experimental works by the impact projectiles. The numerical approach using LS-DYNA involves the process of the crack initiation and propagation as well as the applications of the failure criteria for both the ductile and brittle failures. The good agreement between the numerical and experimental works are proved.

• 한국재료학회지
• /
• 제33권6호
• /
• pp.251-256
• /
• 2023

This study aims to examine the correlation between microstructures and the mechanical properties of two high-strength API X70 linepipe steels with different specimen directions and Moaddition. The microstructure of the Mo-added steel has an irregularly shaped AF, GB matrix with pearlite because of the relatively large deformation in the non-recrystallization temperature region, while that of the Mo-free steel shows a PF matrix with bainitic microstructure. In the Mo-added steel, the M/A (martensite-austenite) in granular bainite (GB) and pearlite act as crack initiation sites with decreased upper shelf energy and an increased ductile to brittle transition temperature (DBTT). Regardless of Mo addition, all of the steels demonstrate higher strength and lower elongation in the T direction than in the L direction because of the short dislocation glide path and ease of pile-up at grain boundaries. In addition, the impact test specimens with T-L direction had a lower impact absorbed energy and higher DBTT than those with the L-T direction because the former exhibit shorter unit crack path compared to the latter.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.542-546
• /
• 2005

연성 크랙의 발생 평가를 위한 J-적분이 충격 하중을 받는 탄소성 3점 굽힘 시험편들에 대하여 연구한다. J-적분을 측정하고 평가하는 실험적인 방법이 연구되었으며 이 결과가 유한 요소법을 이용한 탄소성 이론 해석을 한 값들과 비교하여 거의 일치함을 보였다. 이론적인 수치 해석으로서도 본 연구의 유한 요소 모델로서 J-적분값을 계산할 수 있으며 삼점 굽힘 시험편의 동적 비선형 파괴 실험에 있어서 크랙 입구 개구 변위 (CMOD)에 의하여 J-적분값의 단순 계산이 가능함을 입증하였다. 탄소성 재료의 특성이 여러 가지의 충격 속도들에서 고려된다. J-적분은 충격 실험 동안 얻어진 사진들로부터 직접적으로 측정된 크랙 입구 개구 변위로부터 예측될 수 있다.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.823-832
• /
• 2003

To define the causes of cladding degradation which can take place during the operation of nuclear power plants, it is required to develop the new fracture toughness test of spent fuel cladding. The fracture toughness of Zircaloy-4 cladding was estimated using the recently developed KAERI embedded Charpy (KEC) specimen. Axially notched KEC specimens cut directly from unirradiated fuel claddings, were tested in a way similar to the standard toughness test method of a Single Edge Bending (SEB) specimen. The results of KEC fracture toughness test at room temperatures were discussed and compared with those of the previous other studies. In conclusions, even though the KEC fracture toughness test of nuclear fuel claddings was easier and more reliable than those developed earlier, the results from the cladding fracture tests were not the material characteristics but the specific fracture parameters which were deeply related to the specification of claddings. In addition, the phenomenon of a thickness yielding was not observed from the fracture surface. It was closely related to the fact that the plane strain condition of the KEC specimen was changed to the plane stress condition during crack advancing. It was also supported by the fractographic evidence that the formation of ductile dimples at the crack initiation became the similar appearance such as a quasi-cleavage after the sufficient crack advancing.

• 비파괴검사학회지
• /
• 제13권3호
• /
• pp.7-13
• /
• 1993

AISI 4130 금속재를 사용한 균열 컴팩터 인장시편의 파괴거동이 음향방출(AE) 및 초음파 C-scan을 이용하여 조사되었다. 모든 시편들을 특정 수준의 하중까지 증가시키면서, 크랙 개구변위 (COD)와 더불어 여러가지의 음향방출 인자들을 얻었다. 크랙 선단의 크랙 개구변위와 손상(소성)역을 계산하기 위하여 탄소성 유한요소 해석이 수행되었다. 펄스-반사, 침수형으로한 초음파 C-scan은 손상역 크기와 상사시키기 위하여 행해졌다. 유한요소 해석 결과와 측정된 크랙개구변위는 만족할 정도로 일치하였다. 음향방출 결과에서, 시험시편들은 연성거동을 나타내었다. 총 사상수대 크랙 개구변위의 기울기는 크랙 개시점을 결정하는 데에 유용하였다. 예비 시험적인 C-scan 화상은 손상역의 초음파 진폭변화를 보여주었고, 손상역의 형상 및 크기가 유한요소 결과와 정성적으로 부합되었다. 손상역 크기에 관한 추가적인 연구가 요약되었다.

• 소성∙가공
• /
• 제15권8호
• /
• pp.550-555
• /
• 2006

In this study, effects of forming angle and friction coefficient on a initiation of the Mannesmann hole defect were analyzed by using a response surface method. The maximum effective plastic strain at center point of specimen is utilized for the prediction of the starting point of crack occurrence, which is suggested by the comparison of integrals of four different ductile fracture models between the histories of the effective plastic strain at center point. It was revealed that the principal stress at the center is the dominant element to the increase of the effective plastic strain. It was also verified by the simulation results from the comparison of experiment and simulation. It is provided that the forming angle of 25 degrees and the spreading angle of 1 degree can be a proper design condition without an occurrence of internal hole defect and an excessive slip.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1444-1450
• /
• 2003

The fatigue life and tensile strength of JLF-1 steel (Fe-9Cr-2W-V-Ta) and its TIG weldment were investigated at the room temperature and $400^{\circ}C$. Four kinds of test specimens, which associated with the rolling direction and the TIG welding direction were machined. The base metal of JLF-1 steel represented almost anisotropy in the tensile properties for the rolling direction. And the base metal of JLF-1 steel showed lower strength than that of TIG weldment. Also, the strength of all materials entirely decreased in accordance with elevating test temperature. Moreover, the fatigue limit of weld metal was largely increase than that of base metal at both temperatures. The fatigue limit of JLF-1 steel decreased in accordance with elevating test temperature. The fatigue limit of JLF-1 steel decreased in accordance with elevating test temperature. The SEM fractography of tensile test specimen showed conspicuous cleavage fracture of a radial shape. In case of fatigue life test specimen, there were so many striations at crack initiation region, and dimple was observed at final fracture region as a ductile fracture mode.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.221-227
• /
• 2019

One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.

• 비파괴검사학회지
• /
• 제16권3호
• /
• pp.174-183
• /
• 1996

본 연구에서는 인코넬600 합금을 열처리 상태 및 변형속도 등이 서로 다른 SCC 발생 조건하에서 정변형 속도 시험법으로 인장시켜 그때 발생되는 AE신호와 균열 거동을 비교하므로서 SCC 발생 및 진전을 AE로서 적절히 탐지할 수 있는가를 연구하였고, AE로 탐지 가능한 초기의 최소 균열 크기를 측정하므로서 비파괴시험법으로서의 적용성을 평가하고자 하였다 실험 결과, IGSCC에서 발생되는 AE amplitude 준위는 연성파괴 및 기계적인 변형에서 발생되는 것들보다 큰 것으로 나타났으며, 이것은 AE amplitude준위가 AE발생원을 식별할 수 있는 중요한 변수가 될 수 있음을 의미한다. IGSCC 미소균열의 성장 및 주균열의 형성으로부터 주균열의 성장으로 전환되는 시점을 AE로 적절히 감시할 수 있음을 보였으며, AE로 탐지 가능한 최소 균열 크기는 길이 $200{\sim}400{\mu}m$, 깊이 $100{\mu}m$ 이하의 균열인 것으로 나타났다. 결론적으로 AE기술은 입계 응력 부식 균열의 진전을 조기 탐지할 수 있는 유용한 방법으로 평가되며 비파괴시험법으로서의 실제 적용 가능성도 높을 것으로 판단된다.

• 한국주조공학회지
• /
• 제32권3호
• /
• pp.138-143
• /
• 2012

This steel has been synthesized integrating concepts from Austempering Ductile Cast Iron (ADI) technology. While ADI has excellent mechanical and physical properties, the Young's modules of ADI is approximately 20% lower than steel. In addition, the presence of graphite nodules in ADI can be sites of crack initiation, where fracture takes place at graphite matrix interface. Because of this limitations of ADI, there has been a growing interest in austempered steels as structural materials in resent years. In this investigation, a new steel with microstructure composed of ferrite and austenite and with simultaneous high tensile strength (1,150 MPa) and high ductility (33%) was developed. The goal of this investigation is to obtain a better understanding of deformation and transformation behaviour in high carbon retained austenite(${\gamma}_{HC}$) and over-saturated ferrite(${\alpha}$) during the plastic deformation. A detailed study of the microstructure of this steel was carried out by means of X-ray diffraction (XRD) and electron back scattering diffraction (EBSD) technic. In this way it was shown that BCC phase (BCC) took up the larger part of the nominal strain whereas the a part of retained austenite responded to the mechanincal load by partial martensite transformation, and misorientation change in the retained austenite after plastic strain could be attributed to the large elongation.