• 한국통신학회논문지
• /
• 제30권5A
• /
• pp.370-375
• /
• 2005

인터넷 및 통신망 국제표준 단체들은 자신들의 망에서 서비스 품질 보장형 기능을 제공하기 위한 방안으로써 공통적으로 리키버킷에 의한 입력 트래픽 정의 방법을 채택하고 있다. 반면, 그동안 연구결과는 멀티미디어 트래픽의 버스트특성이 시간적으로 광범위한 준위에 걸쳐 있음을 확인하고 있다. 이러한 두개의 상반되는 현실을 해결하기 위하여 본 논문에서는 임계 시준위 개념을 사용한 표준적 트래픽 기술자계산 방법을 제안하고 이를 시뮬레이션을 통하여 분석하였다. 제안된 알고리듬은 지연치가 주어진 상태에서 최상의 성능을 얻음을 수학적으로 증명하였고, 실제 시스템 응용에 대하여 제안하였다.

• ETRI Journal
• /
• 제34권6호
• /
• pp.800-806
• /
• 2012

Transmission performances of direct detection-based 100-Gb/s modulation formats are investigated and compared for metro area optical networks. The effects of optical signal-to-noise ratio sensitivity, chromatic dispersion, cross-channel nonlinearity, and transmission distance on the performance of differential 8-ary phase-shift keying (D8PSK), differential phase-shift keying plus three-level amplitude-shift keying (DPSK+3ASK), and dual-carrier differential quaternary phase-shift keying (DC-DQPSK) are evaluated. The performance of coherent dual-polarization quadrature phase-shift keying (DP-QPSK) with block phase estimation and coherent DP-QPSK with digital differential detection are also presented for reference. According to our analysis, all three direct detection modulation formats could transmit a 100-Gb/s signal over several hundred kilometers of a single-mode fiber link. The results also show that DC-DQPSK outperforms D8PSK and DPSK+3ASK, and the performance of DC-DQPSK is comparable to that of coherent DP-QPSK with digital differential detection. The maximum transmission distance of DC-DQPSK is over 1,000 km, which is enough distance for metro applications.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.279-285
• /
• 2020

An open-end winding (OEW) permanent magnet synchronous motor with dual inverters can synthesize large voltages for a motor with the same DC link voltage. This ability has the advantage of reducing the use of DC/DC boost converters or high voltage batteries. However, zero-sequence voltage (ZSV), which is caused by the difference in the combined voltage between the primary and secondary inverters, can generate a zero-sequence current (ZSC) that increases system losses. Among the methods for eliminating this phenomenon, combining voltage vector eliminated ZSV cannot be accomplished by the conventional Pulse Width Modulation(PWM) method. In this study, a PWM carrier generation method using functionalization to generate a switching pattern to suppress ZSC is proposed and applied to analyze the control influence of the center-zero vector in the switching sequence about the current ripple.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.486-496
• /
• 2016

The voltage unbalance of an LVDC bipolar distribution system was controlled for high power quality. Voltage unbalance may occur in a bipolar distribution system depending on the operation of the converter and load usage. Voltage unbalance can damage sensitive load and lead to converter accidents. The conditions that may cause voltage unbalance in a bipolar distribution system are as follows. First, three-level AC/DC converters in bipolar distribution systems can lead to voltage unbalance. Second, bipolar distribution systems can be at risk for voltage unbalance because of load usage. In this paper, the output DC link of a three-level AC/DC converter was analyzed for voltage unbalance, and the bipolar voltage was controlled with algorithms. In the case of additional voltage unbalance according to load usage, the bipolar voltage was controlled using the proposed converter. The proposed converter is a dual half-bridge converter, which was improved from the secondary circuit of a dual half-bridge converter. A control algorithm for bipolar voltage control without additional converters was proposed. The balancing control of the bipolar distribution system with distributed power was verified through experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2075-2089
• /
• 2008

세계적으로 물류운송이 대형화 및 고속화를 넘어 글로벌화 되어가고 있는 가운데 물류운송의 선진화를 위해서 운송시스템의 개선이 시급하다. 물류의 흐름에서 많은 병목현상을 유발하고 있는 부분은 타교통수단간의 연계운송이며, 연계 운송시 늘어나는 운송시간과 증가되는 물류비용을 줄일 수 있는 논스톱 형태의 복합운송의 필요성이 대두되고 있다. DMT(Dual Mode Trailer)는 철도와 도로를 이용 가능하도록 고안되어 문전수송이 가능하도록 하는 일괄수송시스템을 의미하며, 우리나라에서는 도로와 철도를 연결하여 운송되는 시스템을 통칭 DMT 수송시스템으로 불리고 있다. 신개념 운송시스템인 외국의 DMT 수송시스템을 살펴보고 한국형 DMT 수송시스템 개발을 위한 추진현황 및 향후과제에 대해 제시하고자 한다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.57-62
• /
• 2013

We have numerically implemented a receiver side all-optical signal processing method, i.e. optical backward propagation (OBP), by dispersion compensating fiber (DCF) and non-linear compensator (NLC) devised by effective negative Kerr non-linear coefficient using two highly non-linear fibers (HNLFs). The method is implemented for the post-processing of fiber transmission impairments, i.e. chromatic dispersion (CD) and non-linearities (NL). The OBP module is evaluated for dual-polarization (DP) m-ary (m=4,16,32,64,256) quadrature amplitude modulation (QAM) in 112 Gbit/s coherent transmission over 1200 km standard single mode fiber (SMF). We have also investigated an intensity limited optical backward propagation module (IL-OBP) by using a self-phase modulation-based optical limiter with an appropriate pre-chirping to compensate for the intensity fluctuations in the transmission link. Our results show that in highly non-linear sensitive 256QAM transmission, we have observed a 66% increase in the transmission distance by implementing IL-OBP as compared to conventional OBP.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.150-157
• /
• 2021

Nowadays, a DC microgrid that can link various distributed power sources is gaining much attention. Accordingly, research on fault situations, such as line-to-line and line-to-ground faults of the DC microgrid, has been conducted to improve grid reliability. However, the blackout of an AC system and the oscillation of a DC bus voltage have not been reported or have not been sufficiently verified by previous research. In this study, a 20 kW DC microgrid testbed using a power HIL simulation technique is proposed. This testbed can simulate various fault conditions without any additional grid facilities and dangerous experiments. It includes the blackout of the DC microgrid caused by the AC utility grid's blackout, a drastic load increment, and the DC bus voltage oscillation caused by the LCL filter of the voltage source converter. The effectiveness of the proposed testbed is verified by using Opal-RT's OP5707 real-time simulator with a 3 kW prototype three-port dual-active-bridge converter.

• 한국통신학회논문지
• /
• 제37권2B호
• /
• pp.97-109
• /
• 2012

본 논문에서는 기지국(base station: BS)과 릴레이(relay station: RS), 그리고 단말(mobile station: MS) 사이의 릴레이 채널과 액세스 채널의 품질이 서로 다른 양방향 비대칭 채널에서 네트워크 부호화 기법을 위한 변조 방식을 제안한다. 제안하는 변조 방식은 이중 성상도를 기반으로 하고 있으며, RS는 네트워크 부호화된 심볼을 연속된 두 심볼 구간 동안 서로 다른 성상도를 이용하여 BS와 MS로 방송한다. 레일리 페이딩 채널에서 제안하는 변조 방식의 비트 오류율 성능에 대한 상한 식을 수학적으로 유도하고, 기존에 양방향 비대칭 채널에서 네트워크 부호화 기반의 양방향 통신 기법을 위해 제안되었던 혼합 성상도 기반의 변조 방식과 성능을 비교 분석한다. 또한 제안하는 변조 방식을 사용하는 네트워크 부호화 기반의 양방향 통신 기법과 기존의 양방향 통신 기법들의 총 채널 사용 횟수를 비교 분석한다. 모의실험을 통해 제안하는 변조 방식이 양방향 비대칭 채널에서 기존 기법들과 동일한 대역 효율성을 유지하면서도 목표 비트 오류율 $10^{-2}$에서 3.5~4dB의 $E_b/N_0$ 이득이 있음을 보인다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.295-300
• /
• 2001

A variety of high voltage DC power supplies employing the high frequency inverter are difficult to achieve soft switching considering a quick response and no overshoot response under the wide load variation ranges which are used in medical-use x-ray high voltage generator from 20kV to 150kV in the output voltage and from 0.5mA to 1250mA, respectively. The authors develops soft switching high voltage DC power supply designed for x-ray power generator applications, which uses series resonant inverter circuit topology with a multistage voltage multiplier instead of a conventional high voltage diode rectifier connected to the second-side of a high-voltage transformer with a large turn ratio. A constant on-time dual mode frequency control scheme operating under a principle of zero-current soft switching commutation is described. Introducing the multistage voltage multiplier, the secondary transformer turn-numbers and stray capacitance of high-voltage transformer is effective to be greatly reduced. It is proved that the proposed high-voltage converter topology with dual mode frequency modulation mode control scheme is able to be the transient response and steady-state performance in high-voltage x-ray tube load. The effectiveness of this high voltage converter is evaluated and discussed on the basis of simulation analysis and observed data in experiment.

• Journal of Power Electronics
• /
• 제4권3호
• /
• pp.138-151
• /
• 2004

In this paper, a constant frequency phase shifting PWM-controlled voltage source full bridge-type series load resonant high-frequency inverter using the $4^{th}$ generation IGBT power modules is presented for innovative consumer electromagnetic induction heating applications, such as a hot water producer, steamer and super heated steamer. The bridge arm side link passive capacitive snubbers in parallel with each power semiconductor device and AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is evaluated and discussed on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency inverter topology, what is called, DE class type, including the variable-power variable-frequency regulation function can expand zero voltage soft switching commutation area even under low output power setting ranges, which is more suitable and acceptable for newly developed induction heated dual pack fluid heaters. Furthermore, even the lower output power regulation mode of this high-frequency load resonant tank inverter circuit is verified so that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.