• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.62-69
• /
• 2022

EHA (Electro-Hydrostatic Actuator) is more energy efficiency than a centralized hydraulic system. In particular, the EHA used for aircraft has a redundant design in preparation for failure scenario. Also, due to the aircraft's internal space limitation, the actuator's length must be optimized. Therefore, a series configuration of double rod and single rod cylinder is advantageous. However, due to the asymmetry of the cross-sectional area of the piston, the force fighting phenomenon between the two cylinder areas occurs during redundant operation with a general control system. In this paper, the force fighting phenomenon of redundant EHA was simulated. A controller with load compensation and a force control-based position controller as a method to suppress its stimulation

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2015.05a
• /
• pp.545-570
• /
• 2015

Korea is among the ten countries with the largest R&D budget and the highest R&D investment-to-GDP ratio, yet the subject of security and protection of R&D results remains relatively unexplored in the country. Countries have implemented in their legal systems measures to properly protect cutting-edge industrial technologies that would adversely affect national security and economy if leaked to other countries. While Korea has a generally stable legal framework as provided in the Regulation on the National R&D Program Management (the "Regulation") and the Act on Industrial Technology Protection, many difficulties follow in practice when determining details on security management and obligations and setting standards in carrying out national R&D projects. This paper proposes to modify and improve security level classification standards in the Regulation. The Regulation provides a dual security level decision-making system for R&D projects: the security level can be determined either by researcher or by the central agency in charge of the project. Unification of such a dual system can avoid unnecessary confusions. To prevent a leakage, it is crucial that research projects be carried out in compliance with their assigned security levels and standards and results be effectively managed. The paper examines from a practitioner's perspective relevant legal provisions on leakage of confidential R&D projects, infringement, injunction, punishment, attempt and conspiracy, dual liability, duty of report to the National Intelligence Service (the "NIS") of security management process and other security issues arising from national R&D projects, and manual drafting in case of a breach. The paper recommends to train security and technological experts such as industrial security experts to properly amend laws on security level classification standards and relevant technological contents. A quarterly policy development committee must also be set up by the NIS in cooperation with relevant organizations. The committee shall provide a project management manual that provides step-by-step guidance for organizations that carry out national R&D projects as a preventive measure against possible leakage. In the short term, the NIS National Industrial Security Center's duties should be expanded to incorporate national R&D projects' security. In the long term, a security task force must be set up to protect, support and manage the projects whose responsibilities should include research, policy development, PR and training of security-related issues. Through these means, a social consensus must be reached on the need for protecting national R&D projects. The most efficient way to implement these measures is to facilitate security training programs and meetings that provide opportunities for communication among industrial security experts and researchers. Furthermore, the Regulation's security provisions must be examined and improved.

• Molecules and Cells
• /
• v.20 no.1
• /
• pp.83-89
• /
• 2005

HtrA2/Omi is a mammalian mitochondrial serine protease homologous to the E. coli HtrA/DegP gene products. Recently, HtrA2/Omi was found to have a dual role in mammalian cells, acting as an apoptosis-inducing protein and being involved in maintenance of mitochondrial homeostasis. By screening a human brain cDNA library with $A{\beta}$ peptide as bait in a yeast two-hybrid system, we identified HtrA2/Omi as a binding partner of $A{\beta}$ peptide. The interaction between $A{\beta}$ peptide and HtrA2/Omi was confirmed by an immunoblot binding assay. The possible involvement of HtrA2/Omi in $A{\beta}$ peptide metabolism was investigated. In vitro peptide cleavage assays showed that HtrA2/Omi did not directly promote the production of $A{\beta}$ peptide at the ${\beta}/{\gamma}$-secretase level, or the degradation of $A{\beta}$ peptide. However, overexpression of HtrA2/Omi in K269 cells decreased the production of $A{\beta}40$ and $A{\beta}42$ by up to 30%. These results rule out the involvement of HtrA2/Omi in the etiology of Alzheimer's disease. However, the fact that overexpression of HtrA2/Omi reduces the generation of $A{\beta}40$ and $A{\beta}42$ suggests that it may play some positive role in mammalian cells.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.140-159
• /
• 1994

Heraldry, which originated from the culture of knights in the 12th century, came to be drawn on shields, and was inherited as a symbol of the family at the end of the 12th century and developed rapidly through the 13th and 14th century. Afterwards heraldry was in great vogue and used in the shields, clothes of men and women, armors, housings and flags. Therefore the citizen class as well as nobles and knights came to possess heraldry. In particular parti-color and impaled coat were accepted in the clothes, and served the dual purpose of status symbol and ornament in the 13th century. It can be said that the appearance of heraldry on the clothes was typical of the Middle Ages. The origin, generally accepted, was that the crusaders wore the surcots, also known as the cyclases, on the armors to prevent the powerful sun of Syria and dust of deserts, and to prevent the armors from rusting due to moisture. As the surcot was made of white linen or white silk till the beginning of the 13th century, knight's heraldry came to be put on the surcot in order to identify each corps. According as the coat of mail covering all the body was devised, the same heraldry attached on the shield seemed to appear on the clothes of surcot or jupon(afterwards pourpoint) in order to identify the status in the battlefield and tournament. Heraldry, a system of mark in the 12th century, was used as a symbol of authority of the upper class such as the Royal House, nobles and knights, and may have been mysterious instruments in the Milddle Ages. However, in the modern times of the 20th century heraldry has come to be a kind of symbol marks such as badges and banners symbolizing the hallmark of the goods of enterprises, organizations and groups. Heraldry, existing up to now, of the individuals as well as international organizations can be seen as a result of deep-rooted tradition for esthetic appreciation and symbolism for heraldry.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.43-50
• /
• 2013

Recently, Cyber threats that is doing intelligence and sophistication from the organization's information assets to secure order technical disciplines, as well as managerial and environmental sectors, such as mind-response system is must established. In this paper, possible to analyze the case for the theory in network security, such as the logical network and physical network separation suitable for the corporate environment and constantly respond and manage the Information Security Management Model A secure network design is proposed. In particular, the proposed model improvements derived from the existing network, network improvements have been made in order to design improved ability to respond to real-time security and central manageability, security threats, pre-emptive detection and proactive coping, critical equipment in the event of a dual hwalreu through applied features such as high-availability, high-performance, high-reliability, ensuring separation of individual network security policy integrated management of individual network, network security directional.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.293-297
• /
• 2016

Ni-C composite films were prepared by co-deposition using a combined technique of plasma CVD and ion beam sputtering deposition. Depending on the deposition conditions, Ni-C thin films manifested three kinds of microstructure: (1) nanocrystallites of non-equilibrium carbide of nickel, (2) amorphous Ni-C film, and (3) granular Ni-C film. The electrical resistivity was also found to vary from about $10^2{\mu}{\Omega}cm$ for the carbide films to about $10^4{\mu}{\Omega}cm$ for the amorphous Ni-C films. The Ni-C films deposited at ambient temperatures showed very low TCR values compared with that of metallic nickel film, and all the films showed ohmic characterization, even those in the amorphous state with very high resistivity. The TCR value decreased slightly with increasing of the flow rate of $CH_4$. For the films deposited at $200^{\circ}C$, TCR decreased with increasing $CH_4$ flow rate; especially, it changed sign from positive to negative at a $CH_4$ flow rate of 0.35 sccm. By increasing the $CH_4$ flow rate, the amorphous component in the film increased; thus, the portion of $Ni_3C$ grains separated from each other became larger, and the contribution to electrical conductivity due to thermally activated tunneling became dominant. This also accounts for the sign change of TCR when the filme was deposited at higher flow rate of $CH_4$. The microstructures of the Ni-C films deposited in these ways range from amorphous Ni-C alloy to granular structures with $Ni_3C$ nanocrystallites. These films are characterized by high resistivity and low TCR values; the electrical properties can be adjusted over a wide range by controlling the microstructures and compositions of the films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.525-532
• /
• 2014

In this study, practical design method of coupling beams is proposed. The member forces varies according to the location of the members and the members at 25%~40% of building height shows large member forces. The 100mm increase of wall thickness causes 3~4% variation of member forces and the 100MPa increase of concrete strength decrease approximately 3% of member forces. The required strength of coupling beams is twice the resistant strength and 80% reduction of coupling beam stiffness is necessary to fulfill the design criteria. The stiffness reduction of coupling beams is not necessary over the entire stories and the strength reduction range can be estimated considering design requirements.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.449-456
• /
• 2018

Objective: Nanog, a homeodomain protein, has been investigated in humans and mice using embryonic stem cells (ESCs). Because of the limited availability of ESCs, few studies have reported the function and role of Nanog in porcine ESCs. Therefore, in this study, we investigated the location of the porcine Nanog chromosome and its basal promoter activity, which might have potential applications in development of ESCs specific marker as well as understanding its operating systems in the porcine. Methods: To characterize the porcine Nanog promoter, the 5'-flanking region of Nanog was isolated from cells of mini-pig ears. BLAST database search showed that there are two porcine Nanog genomic loci, chromosome 1 and 5, both of which contain an exon with a start codon. Deletion mutants from the 5'-flanking region of both loci were measured using the Dual-Luciferase Reporter Assay System, and a fluorescence marker, green fluorescence protein. Results: Promoter activity was detected in the sequences of chromosome 5, but not in those of chromosome 1. We identified the sequences from -99 to +194 that possessed promoter activity and contained transcription factor binding sites from deletion fragment analysis. Among the transcription factor binding sites, a Sp1 was found to play a crucial role in basal promoter activity, and point mutation of this site abolished its activity, confirming its role in promoter activity. Furthermore, gel shift analysis and chromatin immunoprecipitation analysis confirmed that Sp1 transcription factor binds to the Sp1 binding site in the porcine Nanog promoter. Taken together, these results show that Sp1 transcription factor is an essential element for porcine Nanog basal activity the same as in human and mouse. Conclusion: We showed that the porcine Nanog gene is located on porcine chromosome 5 and its basal transcriptional activity is controlled by Sp1 transcription factor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.783-788
• /
• 2003

In this paper, we present a new approach to detect and recognize human face in the image from vision camera equipped on the mobile robot platform. Due to the mobility of camera platform, obtained facial image is small and pose-various. For this condition, new algorithm should cope with these constraints and can detect and recognize face in nearly real time. In detection step, ‘coarse to fine’ detection strategy is used. Firstly, region boundary including face is roughly located by dual ellipse templates of facial color and on this region, the locations of three main facial features- two eyes and mouth-are estimated. For this, simplified facial feature maps using characteristic chrominance are made out and candidate pixels are segmented as eye or mouth pixels group. These candidate facial features are verified whether the length and orientation of feature pairs are suitable for face geometry. In recognition step, pseudo-convex hull area of gray face image is defined which area includes feature triangle connecting two eyes and mouth. And random lattice line set are composed and laid on this convex hull area, and then 2D appearance of this area is represented. From these procedures, facial information of detected face is obtained and face DB images are similarly processed for each person class. Based on facial information of these areas, distance measure of match of lattice lines is calculated and face image is recognized using this measure as a classifier. This proposed detection and recognition algorithms overcome the constraints of previous approach [15], make real-time face detection and recognition possible, and guarantee the correct recognition irregardless of some pose variation of face. The usefulness at mobile robot application is demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.156-161
• /
• 2006

In this paper, GPS/IMT2000/Wireless LAN compact chip antenna is designed for mobile communication system. The proposed antenna size is $10.2mm{\times}21mm{\times}1mm$. It consists of three meander lines. dual resonance frequencies is achieved by two effective current paths using two meander lines and via. also The parasitic meander line structure is added. The coupling is adjusted by arranging parasitic meander line for triple-band. The fabricated antenna achieve triple-band. The resonance frequencies are 1.672GHz, 2.092GHz, 2.504GHz. The impedance bandwidths of each resonance frequencies are 156MHz, 272MHz, 64MHz. The maximum radiation gains of fabricated antenna are 0.08dBi, 1.67dBi, -1.44dBi. The proposed antenna achieve quasi monopole radiation pattern.