• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.782-785
• /
• 2021

In this paper, we propose a personalized cooling management system with thermal imaging camera. The proposed equipment uses a thermal imaging camera to control the amount of cold air and the system according to the difference between the user's skin temperature before and after the procedure. When the skin temperature is abnormally low, the cold air supply is cut off to prevent the possibility of a safety accident. It is economical by replacing the skin temperature sensor with a thermal imaging camera temperature measurement, and it can be visualized because the temperature can be checked with the thermal image. In addition, the proposed equipment improves the sensitivity of the sensor that measures the distance to the skin by calculating the focal length by using a dual laser pointer for the safety of a personalized cooling management system to which a thermal imaging camera is applied. In order to evaluate the performance of the proposed equipment, it was tested in an externally accredited testing institute. The first measured temperature range was -100℃~-160℃, indicating a wider temperature range than -150~-160℃(cryo generation/USA), which is the highest level currently used in the field. In addition, the error was measured to be ±3.2%~±3.5%, which showed better results than ±5%(CRYOTOP/China), which is the highest level currently used in the field. The second measured distance accuracy was measured as below ±4.0%, which was superior to ±5%(CRYOTOP/China), which is the highest level currently used in the field. Third, the nitrogen consumption was confirmed to be less than 0.15 L/min at the maximum, which was superior to the highest level of 6 L/min(POLAR BEAR/USA) currently used in the field. Therefore, it was determined that the performance of the personalized cooling management system applied with the thermal imaging camera proposed in this paper was excellent.

• The Korean Society of Law and Medicine
• /
• v.23 no.3
• /
• pp.117-137
• /
• 2022

Today, the medical system is changing into a comprehensive health care system in which collaborative relationships between medical professionals and non-medical personnels in neighboring occupational areas. The current medical act brands such "collaboration" as unlicensed medical practice, and punishes non-medical personnel who acted in the risk management of doctors as well as doctors collaborated with non-medical personnel as unlicensed medical practice. In order to narrow the gap between the legal system that regulates unlicensed medical practices and the medical reality, it is necessary to overcome the structural limitations of dualistic, nationalistic, and identity-oriented regulation of unlicensed medical practices. The legal interests of unlicensed medical practice have a dual nature as a personal legal interest of "human life and body" as well as a national legal interest of "maintenance and protection of the nation's medical license system", and it should be noted that the criteria for judging the legal interests protected by the regulations of criminal punishment should be found in "personal legal interest theory." In addition, when determining which behavior is a medical practice and evaluating its risk, the dimension of behavior and measures should be considered in a fair manner without being biased against the subject (identity) of the action. In other words, judging unlicensed medical practice should depend on whether the risk of side effects that may result from the act is reasonably managed. Considering the prospect of therapeutic dialogue between medical professionals and patients, it would be desirable for medical law policies to move in a way that does not fundamentally block the possibility of collaboration among pluralistic medical personalities.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.726-736
• /
• 2017

This study was conducted to analyze whether environmental information could be used for environmental inspection. In addition, environmental information was collected and then an environmental information system applicable to inspection was (developed) using the on-site inspection of pollutant emission facilities and interviews with inspection experts based on the collected information. Moreover, the availability of the information was evaluated based on the (dual-purpose) environmental information system. The information was accumulated in the environmental information system and controlled according to its purpose. The environmental information needed for inspection was divided into four categories: information on emissions, information on emission companies, information on inspection records, and geographic information. The environmental information for each system was evaluated based on these four categories. For most of the systems, it was not possible to find the necessary inspection records. Based on the results, a method was proposed to connect and integrate the perspective of applied and environmental information from previous environmental information systems.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.33-66
• /
• 2009

Common law makes a distinction between partial breach and material breach. Attempted definitions of material breach are notoriously unsatisfactory, and the concept of partial breach does not necessarily bear an inverse relationship to substantial performance. This study will review the basic structure of common law contract remedies together with how these remedies are reflected in UCC Article 2 for sale of goods contracts. The matter is complicated because availability of remedy depends on the seriousness of the breach, and the right to cure, and (for sale of goods) these in turn depend on whether the contract is an installment contract or a single performance contract. Common law jurisdictions relegate specific performance of contracts to a last place in the hierarchy of contract remedies. Common law lawyers should recognize that this is the result of historical accident and not the product of some kind of superior intellectual effort. Not only is the attitude of civil law systems toward specific performance quite different, but for international sales contracts in developing nations, a remedy system based on the notion that substitute contracts are readily available(and therefore damage remedies are appropriate) is unrealistic. English common law courts were largely restricted to remedies in the form of monetary damages. For that reason the primary contract remedy at common law has never been specific performance. Rather, common law courts have struggled to develop an appropriate measure of monetary damages for breach of contract. Today, specific performance is viewed as an equitable remedy rather than common law. In the United States the dual court system has been abolished by a merger of law and equity courts into a single court structure. However some historical distinction linger on. The most important is that jury trials are generally not available in actions that seek equitable relief. If a plaintiff seeks in personam relief, such as specific performance of a contract, the action will be viewed as equitable and there will be no entitlement to a jury. Further, equitable relief will be granted only in those situations where the plaintiff pleads and proves that the remedy at law is inadequate. The purpose of this study aims to analyze the remedy system of breach of contract of U.K. and U.S. in the international commercial transactions with criterion of commercial rationality.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2011

The effects of Sm:Ba:Cu composition ratio in SmBCO coated conductor on their superconducting properties were investigated. The SmBCO coated conductors were fabricated by reactive co-evaporation method using EDDC(Evaporation using Drum in Dual Chamber) system. In this system, we could obtain various samples with different composition ratios in a batch by the technique providing composition gradient at deposition zone. From the specimens prepared by EDDC system, we found that composition ratio is uniform parallel to the drum axis, but gradient along the circumferential direction of the drum. We installed a shield having parallelogram open area between the deposition chamber and the evaporation chamber in EDDC system, and attached a 30 cm long template, which is parallel to drum axis, onto the drum surface. In this configuration, we could obtain SmBCO coated conductors having a gradient composition along the length of template. We measured the composition ratios and surface morphologies with periodic interval by SEM and EDAX, and confirmed the profile of composition ratio. We also measured critical current using non-contact Hall probe critical current measurement system and thereby could plot composition ratio vs. critical current. The maximum critical current was obtained, and the surface morphology with the shape of roof tile was observed at the corresponding composition ratio of Sm:Ba:Cu = 1.01:1.99:4.87. It was also found that composition ratio had an effect on not only critical current but also surface morphology.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.209-216
• /
• 2005

A new second generation advanced thermal imager, which can be used for battle tank sight has been developed by ADD. This system uses a $480\times6$ TDI HgCdTe detector, operating in the $7.7-10.3{\mu}m$ wavelength made by Sofradir. The IR optics has dual field of views such as $2.67\times2^{\circ}$ in NFOV and $10\times7.5^{\circ}$ in WFOV. And also, this optics is used for athermalization of the system. It is certain that our sensor can be used in wide temperature range without any degradation of the system performance. The scanning system to be able to display 470,000 pixels is developed so that the pixel number is greatly increased comparing with the first generation thermal imaging system. In order to correct non-uniformity of detector arrays, the two point correction method has been developed by using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we have proposed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained the highest quality thermal image. The MRTD of the LWIR thermal sight shows good results below 0.05K at spatial frequency 2 cycles/mrad at the narrow field of view.

• 한국사회정책
• /
• v.25 no.1
• /
• pp.195-229
• /
• 2018

This study has examined how the welfare system has changed as it has passed through the most controversial period in Korean modern history. The welfare system has changed in a way that adapts to the need for export-led economic growth. Industrialization centered on light industry, which started in the mid-1960s, absorbed the labor force that existed in the rural areas and commodified them, thereby creating a momentum for Korean society to get out of poverty. However, the public de-commodification, ie social security system, adapted to the commodification of the labor force has been institutionalized only in a very limited area and people. Indeed, the de-commodification system was confined to the area directly linked to the reproduction of the labor force. Even so, the target was very limited in the abundance of labor in rural areas. Compulsory medical insurance was rejected because of corporate burden, and industrial accidents insurance was introduced centering on large-scale workplaces. As the Korean economy began to move from the light industry to the heavy industry in the 1970s, the commodificated labor force changed from a low skilled labor force to a skilled male labor force. It is at this time that dual structures have begun to be created between workers employed in export-oriented large enterprises and workers employed in domestic-oriented SMEs. Therefore, the system of de-commodification that supports the reproduction of labor power in response to social risks has also been institutionalized centering on large-scale workplaces.

• The Korean Journal of Archival Studies
• /
• no.52
• /
• pp.119-170
• /
• 2017

This study aims to analyze the environment for the open-source records system and to identify the risk and requirements for the success of the strategy in Korea. For this, Chapter 2 presented a review of the strategic benefits of open source to public organizations, developers, and users. It also discussed the process of cooperatively developing and releasing the source code and the technology infrastructure supporting open source. In Chapter 3, six representative open-source projects in the field of records management were selected, and case studies were conducted. To derive comprehensive implications, we have divided the main development body of open-source projects into international organizations, international cooperation systems, national archives, and software development companies. We also analyzed the background and purpose of each project, the agents of development and funding, the governance model, the development period and cost, the business model and software architecture, the community composition, and the licensing strategy. Through this, we have derived four critical success factors. In terms of technology, a component-based design was required; therefore, we proposed a microservice architecture and a model-view-controller design pattern. Next, it was necessary to reestablish system requirements of records center and archives. Moreover, we also proposed a dual licensing strategy to allow developers to easily participate in open-source projects. Lastly, we emphasized a strong governance structure and an effective cooperation framework to create a sustainable community. For a record system to be open-source successfully in an organization-centered market, the roles of software developers and end users should be exercised more in the community. To achieve this, it is important to build various collaborative tools and development infrastructure from a planning stage to a centralized one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.836-844
• /
• 2020

In modern society, there is a growing demand for human tissue donation along with organ donation. However, the awareness of tissue donation and actual donation rates remain very low in South Korea. This study was undertaken to evaluate the current status of domestic laws and systems, and to compare them with the operation systems of major foreign countries, by reviewing literature and web sites of organ donation and registration. The authors present three measures to promote human tissue donation in Korea: integration of a dual legal system in a legal aspect, vitalization of the Opt-out system in terms of system operation, and activation of public relations in terms of social and cultural aspects. The Opt-out system, in particular, is the most effective way to activate transplants in the form of presumed consent of countries without undue pressure. However, the presumed consent method requires various stages of social public debate, and the requirement is a proper domestic understanding of the registration system for rejection. In conclusion, we believe the solution towards a positive inclination for organ donation is a public policy to increase the supply for organs and human tissue transplants, and positive perception of donations, public promotion, and support for postmortem donors and their families.