• Coupled systems mechanics
• /
• v.7 no.1
• /
• pp.5-25
• /
• 2018

A fully-coupled thermodynamic-based transient finite element formulation is proposed in this article for electric, magnetic, thermal and mechanic fields interactions limited to the linear case. The governing equations are obtained from conservation principles for both electric and magnetic flux, momentum and energy. A full-interaction among different fields is defined through Helmholtz free-energy potential, which provides that the constitutive equations for corresponding dual variables can be derived consistently. Although the behavior of the material is linear, the coupled interactions with the other fields are not considered limited to the linear case. The implementation is carried out in a research version of the research computer code FEAP by using 8-node isoparametric 3D solid elements. A range of numerical examples are run with the proposed element, from the relatively simple cases of piezoelectric, piezomagnetic, thermoelastic to more complicated combined coupled cases such as piezo-pyro-electric, or piezo-electro-magnetic. In this paper, some of those interactions are illustrated and discussed for a simple geometry.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1282-1289
• /
• 1989

Dual field speckle interferometry that is sensitive to the surface displacement of the object is constructed, and fringe patterns that have the displacement-informations are analysed using digital image processing. From 10\ulcorner to 80\ulcorner with respect to each specklegrams are obtained by double-exposure techniques, which are analysed by the proposed system and algorithm. Up to 10\ulcorner displacement, near measurable lower bound of Speckle Interferometry, fringe visibility is decreased due to decreasing fringe density, therefore relative errors are produced over 10% but over that displacement, relative errors are produced below 5%. Particularly, it is observed that spatial frequencies of each displacement are comparatively linear.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.613-618
• /
• 2018

We are developing a shared remote control mobile robot for aerial work in nuclear power plants (NPPs); a robot consists of a mobile platform, a telescopic mast, and a dual-arm slave with a working tool. It is used at a high location operating the manual operation mechanism of a fuel changer of a heavy water NPP. The robot system can cut/weld a pipe remotely in the case of an emergency or during the dismantling of the NPP. Owing to the challenging control mission considering limited human operator cognitive capability, some remote tasks require a shared control scheme, which demands systematic software design and integration. Therefore, we designed the architecture of the software systematically.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.3 s.108
• /
• pp.233-239
• /
• 2006

The effect of the joint condition of automotive muffler shell and baffle on radiated noise from muffler shell Is studied. Shell vibration characteristics, especially shift In natural frequency and change in of response amplitude, was identified from finite element analysis and modal tests for various joint conditions between shell and baffle. When there is heat expansion and inner pressure from the exhaust 9as in the muffler with elliptical cross section, the shell expands out, and construct gap with baffles. This gap causes more degrees of freedom of shell vibration and natural frequency shift. By welding the muffler shell to the baffles or using a dual shell muffler, the radiated noise problem could be mitigated supplying more a rigid joint and damping, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1047-1051
• /
• 2004

Charge amplifier systems benefit from the very wide dynamic range of PE accelerometers by offering flexibility in adjusting the electrical output characteristics such as sensitivity and range. They are well suited for operation at high temperatures. Modern charge systems feature improved low noise operation, simplified digital controls, and dual mode operation for operation with charge or IEPE voltage mode sensors. high impedance circuitry is not well suited for operation in adverse field or factory environments. The resolution of a PE accelerometer may not be specified or known since noise is a system consideration determined by cable length and amplifier gain. IEPE accelerometrs operate from a constant current power source, provide a high-voltage, low-impedance, fixed mV/g output. They operate through long, ordinary, coaxial cable in adverse environments without degradation of signal quality. They have limited high temperature range. IEPE sensors are simple to operate. Both resolution and operating range are defined specifications. Cost perchannel is lower compared to PE systems since low-noise cable and charge amplifiers are not required.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.193-196
• /
• 2002

In this paper, we presents the remote inspection activity with a mobile robot at the calandria face areas of the PHWR (pressurized heavy water reactor) nuclear power plants during full power plant operation.. The tele-operated mobile robot has been developed for this task. A 4 wheeled mechanism with the dual reconfigurable crawler arm has been adopted for the ease access to the high radiation area of calandria face. A specially designed extendable long reach mast attached on the mobile platform and the thermal image monitoring system enable human eyes to look into the calandria face. Application of robot will keep human workers from high radiation exposure and enhance the reliability of nuclear power plants.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.194-201
• /
• 2015

A frequency modulated ultra-wideband (FM-UWB) transmitter with a high-robust relaxation oscillator for subcarrier generation and a dual-path Ring VCO for RF FM is proposed, featuring low power and low complexity. A prototype 3.65-4.25 GHz FM-UWB transceiver employing the presented transmitter is fabricated in $0.18{\mu}m$ CMOS for short-range wireless data transmission. Experimental results show a bit error rate (BER) of $10^{-6}$ at a data rate of 12.5 kb/s with a communication distance of 60 cm is achieved and the power dissipation of 4.3 mW for the proposed transmitter is observed from a 1.8 V supply.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.78-83
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interformetry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. However, the existing ESPI methods that are based on dual-exposure, real-time and time-average method have difficulties for accurate measurement of structure, due to irregular intensity and shake of phase. Therefore, phase shifting method has been proposed in order to solve this problem. About the method, the path of reference light in interferometry is shifted and added to least square fitting method to make the improvement in distinction and precision. This proposed method is applied to measure in -plane displacement that is compared with the previous method. Also, Used as specimen AS4/PE따 [30/=30/90]s was analyzed by ESPI based on real-time to determine the characteristics of vibration under no-load and tension. These results are quantitatively compared with those of FEM analysis inmode shapes.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1377-1380
• /
• 2008

An irradiation test of a nuclear fuel rod having external and internal tube structure was planned for a performance. To establish fabrication process satisfying the requirements of irradiation test, micro-TIG welding system for fuel rods was developed, and preliminary welding experiments for optimizing process conditions of fuel rod was performed. Fuel rods with 15.9mm diameter and 0.57mm wall thickness of cladding tubes and end caps have been used and optimum conditions of endcap welding have been selected. In this experiment, the qualification test was performed by tensile tests, helium leak inspections, and metallography examinations to qualify the endcap welding procedure. The soundness of the welds quality of a dual cooled fuel rods has been confirmed by mechanical tests and microstructural examinations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.893-896
• /
• 2007

본 논문에서 제안하는 시스템은 Ladle 나탕의 상태를 카메라를 사용하여 Ladle 탕면을 관측하고 획득한 영상데이터를 주조정장치로 보내게 되는데, 이러한 영상데이터를 보내기 위해서는 유선 송수신 방식은 Ladle의 회전 특성상 사용하지 못하므로 무선 송수신 방식을 사용한다. 또한 초고온 환경이므로 고온에 견딜 수 있도록 Housing 기술을 이용한 Dual 영상카메라 장착 관측시스템을 구축하고, 탕면 거리, 버블 영상 등을 통해 그 크기를 산출하는 알고리듬을 제안한다. 제안한 알고리듬에 따라 20분의 연주시간에 대하여 19.25Cm의 지름을 가친 Bubble의 크기를 계산할 수 있었다.