• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2172-2179
• /
• 2002

In this paper, we examine the dynamic electromechanical behavior of an edge crack in a piezoelectric ceramic layer bonded between two elastic layers under the combined anti-plane mechanical shear and in-plane electric transient loadings. We adopted both the permeable and impermeable crack boundary conditions. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the dynamic energy release rate are presented to show the dependences upon the geometry, material combination, electromechanical coupling coefficient and electric field.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.138-143
• /
• 2005

Recently, automobile manufacturers regarding stability, economic environmental-friendly problems by the development of automobile, environmental problem as designing the exhaust system. Increasingly strict environmental regulations to lower fuel consumption and reduce emission. Also to reduce the noise and the vibration of the automobile. According to develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption rate demand information of pressure fraction and heat characteristics. To be able to determine these factor for we experiment on each case of exhaust system unit. In this study, how back pressure is distributed in flow-through in exhaust system and how to design exhaust system flexibleness, efficiency and combustion charateristics influenced by back pressure. This study furnish basic data for engineers, technicians.

• International Journal of Contents
• /
• v.12 no.2
• /
• pp.42-48
• /
• 2016

We present efficient algorithms for computing centroid directions for each of the three types of monotonicity in a polyhedron: strong, weak, and directional monotonicity, which can be used for optimizing directions in many 3D manufacturing processes. Strongly- and directionally-monotone directions are the poles of great circles separating a set of spherical polygons on the unit sphere, the centroids of which are shown to be obtained by applying the previous result for determining the maximum intersection of the set of their dual spherical polygons. Especially in this paper, we focus on developing an efficient method for approximating the weakly-monotone centroid, which is the pole of one of the great circles intersecting a set of spherical polygons on the unit sphere. The original problem is approximately reduced into computing the intersection of great bands for avoiding complicated computational complexity of non-convex objects on the unit sphere, which can be realized with practical linear-time operations.

• Journal of Industrial Convergence
• /
• v.13 no.1
• /
• pp.25-40
• /
• 2015

The aim of this study is to a study on the effects of fertile women on the low fertility in Korea. It is designed to research a model and established hypothesis with emphasis on major variables based on theoretical discussions. However, the result of the study is as follows. Firstly, this brought in delivery avoid phenomenon thus resulting in lower delivery phenomenon. The government should propose reasonable solutions to persuade female personal value and important elements of delivery rate at the same time. Secondly, Patriarchal stereotypes weighting household labor to female traditionally pressures working female with double burden as dual stance of work and family worsen the delivery will. Such atmosphere within a family generates female with an ability to get pregnancy to avoid marriage and delivery. Lastly, the research has pointed out the delivery support policy as most ineffective policy among government policies. To solve this problem, the government policy to recover delivery rate must be reviewed continuously and to be exercised immediately.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.4
• /
• pp.244-262
• /
• 2022

In this paper, we analyze the hybridizable discontinuous Galerkin (HDG) method for second-order elliptic equations with nonlinear coefficients, which are used in many fields. We present the HDG method that uses a mixed formulation based on numerical trace and flux. Under assumptions on the nonlinear coefficient and H²-regularity for a dual problem, we prove that the discrete systems are well-posed and the numerical solutions have the optimal order of convergence as a mesh parameter. Also, we provide a matrix formulation that can be calculated using an iterative technique for numerical experiments. Finally, we present representative numerical examples in 2D to verify the validity of the proof of Theorem 3.10.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1501-1502
• /
• 2010

DualCore 혹은 MultiCore 플랫폼의 보급에 따라 높은 시간복잡도를 갖는 응용들도 사용자의 컴퓨터나 단말에서 수행되어 다양한 서비스를 제공할 수 있게 되었다. 본 논문에서는 관광 스케줄을 효율적으로 결정하기 위한 다중목적지 방문 문제에 대해 이중 쓰레드에 기반한 서치 스페이스 탐색 알고리즘을 구현한다. 이는 Traveling Salesman Problem의 한 종류로서 O(n!) 시간 복잡도를 갖고 있으며 검색시의 독립성때문에 각 쓰레드는 병렬적으로 최적의 스케줄을 탐색할 수 있다. 또 현재까지 발견된 최적값을 기반으로 부분 경로의 비용이 이미 최적값을 넘는 경우는 하위 탐색을 제거하여 상당한 성능의 향상을 가져온다. 2.4 GHz Intel(R) Core DuoCPU와 3 GB 메모리로 구성된 플랫폼 상에서 구현된 서비스는 11개의 목적지에 대한 방문 스케줄을 생성함에 있어서 단일 쓰레드 버전은 14.196초, 이중 쓰레드 버전은 6.411초, 제약조건을 포함한 이중 쓰레드 버전은 0.14초에 최적의 스케줄을 찾아낼 수 있다.

• Bulletin of the Korean Mathematical Society
• /
• v.60 no.5
• /
• pp.1237-1252
• /
• 2023

A fundamental problem in coding theory is to find n_q(k, d), the minimum length n for which an [n, k, d]_q code exists. We show that some q-divisible optimal linear codes of dimension 4 over 𝔽_q, which are not of Belov type, can be constructed geometrically using hyperbolic quadrics in PG(3, q). We also construct some new linear codes over 𝔽_q with q = 7, 8, which determine n₇(4, d) for 31 values of d and n₈(4, d) for 40 values of d.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.99-107
• /
• 1997

An algorithm is developed to find optimal machining parameters for multiple machining environments. The cutting rate-tool life (R-T) characteristic curve presents the general loci of optima and is useful for the flexible machining operations planning. The R-T characteristic curve for the machining economics prob- lems with linear-logarithmic tool lofe model may be determined by applying sensitivity analysis to log-dual problems. Three cases of the change of machining environments are considered. An end milling example is constructed to illustrate the algorithm.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.148-153
• /
• 2023

A digital controller uses a microprocessor and is a controller implemented as a program. This method has the advantage of being more maintenance-friendly than existing analog controllers. However, it inevitably requires computation time to execute the internal program. Therefore, the digital controller uses a method of controlling the system at a certain cycle by considering this time, and this cycle is very closely related to the performance of the microprocessor used. In other words, in the case of very high performance, this control cycle can be shortened to near real time, but this may result in a disadvantage in terms of cost. In this paper, we propose a method to solve this problem by implementing two processors with slightly lower performance in a control system in a series-parallel structure. For this purpose, we will use a digital distributed control system and implement an experimental system to examine its effectiveness.

• Korean Journal of Mathematics
• /
• v.31 no.4
• /
• pp.419-431
• /
• 2023

In this paper, we propose an iterative method for a symmetric interior penalty Galerkin method for heterogeneous elliptic problems. The iterative method consists mainly of two parts based on a non-overlapping domain decomposition approach. One is an intermediate preconditioner constructed by understanding the properties of the discontinuous finite element functions and the other is a preconditioning related to the dual-primal finite element tearing and interconnecting (FETI-DP) methodology. Numerical results for the proposed method are presented, which demonstrate the performance of the iterative method in terms of various parameters associated with the elliptic model problem, the finite element discretization, and non-overlapping subdomain decomposition.