• 펄프종이기술
• /
• 제41권1호
• /
• pp.52-60
• /
• 2009

A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.34-38
• /
• 2014

Cu-Ni alloys with unidirectionally aligned pores were prepared by freeze-drying process of CuO-NiO/camphene slurry. Camphene slurries with dispersion stability by the addition of oligomeric polyester were frozen at $-25^{\circ}C$, and pores in the frozen specimens were generated by sublimation of the camphene during drying in air. The green bodies were hydrogen-reduced at $300^{\circ}C$ and sintered at $850^{\circ}C$ for 1 h. X-ray diffraction analysis revealed that CuO-NiO composite powders were completely converted to Cu-Ni alloy without any reaction phases by hydrogen reduction. The sintered samples showed large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The pore size and porosity decreased with increase in CuO-NiO content from 5 to 10 vol%. The change of pore characteristics was explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.230-238
• /
• 2008

Mechanization such as machine harvesting, precleaning, drying and cleaning for rapeseed harvested with high moisture content should be accomplished for biodiesel production. In addition, machine drying and cleaning is inevitable in the mechanization of work, just because rice should be transplanted right after harvesting rapeseed in Korea. Particularly, early harvested rapeseed with the combine have high moisture content and undesirable materials such as stalks and stones which make drying-process difficult and lower the efficiency of drying. Therefore, this study was conducted to develop precleaner and cleaner which could remove foreign substances from harvested rapeseeds. The precleaner consists of throw-in hopper, conveyor, feeding hopper, two precleaning sieves and discharging sections. Precleaning capacity was 1,505 kg/hr in shaking frequency of 370 cpm (cycles per minute) and tilt angles of between $5^{\circ}$ and $7^{\circ}$. The efficiency of precleaning was between 90.9% and 91.5%. The cleaner consists of feeding, shaking, blowing, cleaning and discharging sections. Cleaning performance was 435.4kg/hr in the number of rocking motions of 475 cpm and tilt angle of $10^{\circ}$. The ratios of cleaning, foreign substances and loss were 96.5%, 3.5% and 0.2%, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.50-53
• /
• 2002

YMnO$_3$ thin films were spun-coated on the Pt/Ti/SiO$_2$/Si substrates by sol-gel process using alkoxides, and then dried on hot plates from 300 to 450 $^{\circ}C$. The prepared YMnO$_3$ thin films were annealed at 850 $^{\circ}C$ in O$_2$ atmosphere for 1 h. The crystallization of YMnO$_3$ thin films were improved to preferred c-axis orientation and the dielectric characteristics were progressed by increasing the drying temperature. The range of dielectric constant of thin film dried at 450 $^{\circ}C$ is 12.9-22.3 and close to that of YMnO$_3$ single crystal. The ferroelecrtic property of YMnO$_3$ thin film was observed on the YMnO$_3$ films. The maximum remnant polarization (2Pr) of YMnO$_3$ thin films dried at 450 $^{\circ}C$ was about 2.91 ${\mu}$ C/cm2. It was suggested that the drying temperature affect to the initial stage of thin film growth of preferred c-axis orientation.

• 한국식품영양학회지
• /
• 제33권5호
• /
• pp.551-560
• /
• 2020

The purpose of this study was to investigate the effects of nine times repetitive steaming and drying process Sunsik diets on antioxidant activity in obese mice fed high fat diets to prevent oxidative stress, using drying materials comprising 23 kinds of cereals (61.5%), beans (30.0%), sweet potato and potato (3.0%), fruits (2.0%), vegetables (3.0%), and stevioside, a natural sweetener (0.5%). We produced three samples: the experimental group was classified into the normal diet group (control), the high fat diet group (HF), and the high fat diet group + the Sunsik group (3HFS, 7HFS, 9HFS) fed to the mice for eight weeks. As a result, the serum, liver lipid peroxide, and nitric oxide levels were significantly higher in the HF group than in the C group at p<0.05 level, and the NO level was lower in the Sunsik supplemented groups. The antioxidant enzyme catalase activity significantly decreased in the HF group at the p<0.05 level compared to the C group. The total antioxidant activity of the C group was significantly higher in serum, liver, and kidney tissues than the HF group (p<0.05). The anthocyanin level in liver and spleen tissue was significantly higher in the group fed Sunsik than in the HF group.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.191-195
• /
• 2014

This study reports a simple way of fabricating the porous Cu with unidirectional pore channels by freeze drying camphene slurry with Cu oxide coated Cu powders. The coated powders were prepared by calcination of ball-milled powder mixture of Cu and Cu-nitrate. Improved dispersion stability of camphene slurry could be achieved using the Cu oxide coated Cu powders instead of pure Cu powders. Pores in the frozen specimen at $-25^{\circ}C$ were generated by sublimation of the camphene during drying in air, and the green bodies were sintered at $750^{\circ}C$ for 1 h in $H_2$ atmosphere. XRD analysis revealed that the coated layer of Cu oxide was completely converted to Cu phase without any reaction phases by hydrogen heat treatment. The porous Cu specimen prepared from pure Cu powders showed partly large pores with unidirectional pore channels, but most of pores were randomly distributed. In contrast, large and aligned parallel pores to the camphene growth direction were clearly observed in the sample using Cu oxide coated Cu powders. Pore formation behavior depending on the initial powders was discussed based on the degree of powder rearrangement and dispersion stability in slurry.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.777-781
• /
• 2001

$LiCoO_{2}$ thin films have received attention as cathodes of thin film microbatteries in these days. In this study, $LiCoO_{2}$ thin films are fabricated by a sol-gel spin coating method followed by a post-annealing process. The thermal decomposition behaviour of precursor is investigated by TG/DTA analysis. The change of crystallinity, microstructure and electrochemical properties of final films as the drying temperature changes are also studied by XRD, SEM and galvanostatic charge/discharge cycling test. The relationship between the discharge capacity and the drying temperature are intensively investigated in this work.

• 폴리머
• /
• 제33권3호
• /
• pp.230-236
• /
• 2009

비닐 아세테이트/알킬메타크릴레이트계 에멀젼 공중합에서 반응온도, 개시제의 종류와 농도, 보호콜로이드인 PVA의 종류와 농도, 공단량체인 MMA, EMA의 조성비를 변화시키며 중합하였다. 제조된 공중합체인 poly(vinyl acetate-co-methyl methacrylate)(PVAc/PMMA), poly(vinyl acetate-co-ethyl methacrylate)(PVAc/PEMA)를 수분 측정기를 사용하여 100, 130, 150, 180, $200^{\circ}C$에서 등온건조 시키고, 그 건조 특성을 고찰하여 다음과 같은 결론을 얻었다. 등온법으로 얻은 중합체 고형화 과정의 활성화 에너지는 PVAc/PMMA> PVAc/PEMA> PVAc의 순으로 공단량체의 곁사슬의 탄소수 증가에 따라 감소하였다. 접착박리강도는 동일한 조성의 공중합체에서 보호콜로이드 함량에 비례하여 증가하였고, 내수 접착박리강도는 최적의 보호콜로이드 함량에서 공단량체의 종류와 함량에 따라 PVAc/PMMA>PVAc/PEMA>PVAc 순이다.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.71-76
• /
• 2011

An efficient nucleophilic [$^{18}F$]fluorination has been studied to reduce byproducts and preparation time. Instead of conventional aqueous solution of $K_2CO_3-K_{222}$, several organic solution containing inert organic salts were used to release [$^{18}F$]fluoride ion and anion bases captured in the polymer cartridge, concluding that methanol solution is the best choice. Comparing to azeotropic drying process, one min was sufficient to remove methanol completely, resulting in about 10% radioactivity saving by reducing drying time. The polymer cartridge, Chromafix$^{(R)}$ (PS-$HCO_3$) was pretreated with several anion bases to displace pre-loaded bicarbonate base. Phosphate bases showed better results than carbonate bases in terms of lower basicity. tert-Butanol solvent used as a reaction media played another critical role in nucleophilic [18F]fluorination by suppressing eliminated side product. Consequent [$^{18}F$]fluorination under the present condition afforded fast preparation of reaction solution and high radiochemical yields (98% radio-TLC, 84% RCY) with 94% of precursor remained.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.1-10
• /
• 2006

Movement behavior, shrinkage and equilibrium moisture content (EMC), in this experiment reflected a change of hygroscopicity mainly affected by continuously compressive load during radio-frequency/vacuum (RF/V) drying and humidity changes during equilibrating. As a result of interaction of the compressive load and moisture content changing under the RF/V condition, the shrinkages in loading direction were significantly increased while those perpendicular to loading direction were decreased. The shrinkages were affected most in tangential, and least in longitudinal direction. The shrinkages showed higher values in continuous drying than in intermittent drying. In the direction of increased shrinkage, all the movements were also increased, for example, the tangential movement for the loaded-RS and the radial movement for loaded-TS; in the direction of decreased shrinkage, all the movements except the tangential movement for the loaded-TS were decreased such as the tangential and radial movements for the loaded-ES, and the radial movement for the loaded-RS, comparing with those of the load-free. EMCs of the loaded specimens were all higher than that of the load-free specimen, and the highest for the loaded-TS, the lowest for the loaded-ES. The transverse hygroscopicity of specimen was reduced for the loaded-ES, but increased for the loaded-TS.