• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.1
• /
• pp.107-110
• /
• 1982

Fixed bed drying method was selected to reduce the initial drying time of squid and the effects of drying air temperature and bed height on the drying rate were investigated, with following results. 1. The drying rate in the fixed bed dryer was faster than that of natural convection type dryer heated indirectly and that of hot air dryer heated directly. 2, Shirai-equation was applicable to squid being dried. Using the equation, drying rate constant obtained was as shown in table 1.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.6
• /
• pp.497-503
• /
• 2014

In order to produce the high quality of dried-ear mushroom, various drying methods such as hot-air drying at $40{\sim}80^{\circ}C$, freeze drying and drying in vinyl house were carried out. Drying hours of hot-air drying, freeze drying and drying in vinyl house were 12.5~21.5, 36.0 and 72.0 hrs, respectively. Vitamin $D_2$ content of sample was the highest as $6.77{\mu}g/g$ DW in drying in vinyl house and then followed by freeze drying as $5.90{\mu}g/g$ DW and hot-air drying as $1.89{\sim}5.01{\mu}g/g$ DW. After dry, external appearance and color of mushrooms applied hot-air drying and drying in vinyl house were better than freeze-dried one. After rehydration, water uptake of sample in drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ were 17.8 and 19.3~21.0 times, respectively. The methods of drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ also led to high hardness, good shape and resilience. As the results of production of dried-ear mushroom with high quality, we suggest that the best method for drying is the drying in vinyl house due to not only high vitamin $D_2$ content, good external appearance and color after drying but also high hardness and good shape after rehydration.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.33-39
• /
• 1995

To compare the quality of ultrastructural preservation of Scanning Electron Microscopic specimens dried with different methods; pure air-drying, air-drying with using Tetramethylsilane(TMS), four kind of air-drying using Hexamethyldisilazane(HMDS) and critical point drying(CPD), we conducted scanning electron microscopic observation on liver, skeletal muscle and intestinal tissues from laboratory rat treated with each method. In pure air drying group, severe distortion of tissue surface was observed, and in HMDS treated group, only liver tissue showed slight distortion. But in TMS treated group, each tissue showed a good presentation comparable to CPD group. The results suggest that the method of air-drying using TMS may be the former is less expensive and simple be and also time-saving.

• Nutrition Research and Practice
• /
• v.6 no.3
• /
• pp.187-194
• /
• 2012

In this study, the antibacterial effect was evaluated to determine the benefits of high speed drying (HSD) and far-infrared radiation drying (FIR) compared to the freeze drying (FD) method. Citrus press-cakes (CPCs) are released as a by-product in the citrus processing industry. Previous studies have shown that the HSD and FIR drying methods are much more economical for drying time and mass drying than those of FD, even though FD is the most qualified drying method. The disk diffusion assay was conducted, and the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined with methanol extracts of the dried CPCs against 11 fish and five food-related pathogenic bacteria. The disk diffusion results indicated that the CPCs dried by HSD, FIR, and FD prevented growth of all tested bacteria almost identically. The MIC and MBC results showed a range from 0.5-8.0 mg/mL and 1.0-16.0 mg/mL respectively. Scanning electron microscopy indicated that the extracts changed the morphology of the bacteria cell wall, leading to destruction. These results suggest that CPCs dried by HSD and FIR showed strong antibacterial activity against pathogenic bacteria and are more useful drying methods than that of the classic FD method in CPCs utilization.

• Journal of Biosystems Engineering
• /
• v.38 no.1
• /
• pp.41-47
• /
• 2013

Purpose: The objectives of this study were to construct the solar drying system with evacuated tubular solar collector and to investigate its performance in comparison with indoor and outdoor dryings. Methods: Solar drying system was constructed with using CPC (compound parabolic concentrator) evacuated tubular solar collector. Solar drying system is mainly composed of evacuated tubular solar collector with CPC reflector, storage tank, water-to-air heat exchanger, auxiliary heater, and drying chamber. Performance test of solar drying system was conducted with drying of agricultural products such as sliced radish, potato, carrot, and oyster mushroom. Drying characteristics of agricultural products in solar drying system were compared with those of indoor and outdoor ones. Results: Solar drying system showed considerable effect on reducing the half drying time for all drying samples. However, outdoor drying was more effective than indoor drying on shortening the half drying time for all of drying samples. Solar drying system and outdoor drying for oyster mushroom showed the same half drying time. Conclusions: Oyster mushroom could be dried easily under outdoor drying until MR (Moisture Ratio) was reached to about 0.2. However, solar drying system showed great effect on drying for most samples compared with indoor and outdoor dryings, when MR was less than 0.5.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.43-48
• /
• 2016

PEG (Polyethylene glycol) impregnation in wood reduces the occurrence of checking during kiln drying. The volumetric shrinkages of wood PEG impregnated by pressure (PEG-P) or soaking (PEG-S) methods, and oven-dried by vent (VD) or air-tight (AD) methods were measured and compared with the controls. The average oven-dry weight of PEG impregnated specimens was larger than that of the controls by 3.6 g, but was not influenced by the drying methods. The average of the total volumetric shrinkage of PEG-P-VD specimens was the least (2.3%), while that of CON-S-AD specimens was the largest (28.9%). Within a drying method the total volumetric shrinkage of the control was the largest followed by PEG-S and PEG-P specimens, which implied that residual PEG in wood restrained its shrinkage during drying.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1315-1319
• /
• 2012

Red pepper (Capsicum annuum L.) powder is widely used as a spice and flavor ingredient in the food industry. It is well known that during the drying process red pepper undergoes physico-chemical and nutritional changes. The objective of this study was to investigate the quality of red pepper powder according to drying method. Red pepper was dried by far-infrared drying, hot air drying, and polyethylene (PE) house drying. Average moisture content of dried red pepper powder from the three different drying methods was $12.5{\pm}0.3%$. The pH level slightly increased from 4.93 before drying to 5.00~5.54 after drying. Contents of capsaicinoids were highest (224.40 mg/100 g) in the PE house drying method and lowest (191.87 mg/100 g) in the hot air drying ($70^{\circ}C$) method. However, capsaicinoid contents were not significantly different among the various drying methods. Vitamin C content decreased as temperature increased. Drying conditions, particularly temperature, lead to loss of vitamin C in red pepper, resulting in quality degradation. Taken together, these results demonstrate that the content of vitamin C, one of the major factors affecting pepper powder quality, was affected by drying temperature.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.189-194
• /
• 2004

This experiment was carried out to compare the quality of semi-dried persimmon according to various drying methods and ripeness degree of persimmons. Most of persimmons were dried naturally there were much opportunities of contamination by impurities, microorganism and discoloration. There were need for developing various drying methods and knowing proper mature degree of persimmons in order to enhance the quality of semi-dried persimmons. Drying time of semi-dried persimmons by hot-air, far infrared ray and dehumid drying could be shorten approximately 11∼12 days, comparing with natural drying. And the loss ratio of natural drying and artifical drying were 7.0% and 0.0%. The moisture content of natural drying and dehumid drying were simillar and the hardness were very low in comparing other drying methods. Average pannel scores in semi-dried persimmons after drying showed that dehumid drying and natural drying were excellent in total prefernce ; 3.9 and 3.4, respectively. Unriped persimmons showed lower moisture content, color values and higher hardness than riped and overriped persimmons. The total preference of riped and overriped fruit were superior than unriped fruit.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.2
• /
• pp.83-88
• /
• 1995

This study was conducted to examine the effects of additives and drying methods in Yukwa's manufacture. Additives had significant effects on hardness, and bean water and bean powder added group rated better than the baking powder and boiled bean added group. Sensory evaluation test showed that bean water and bean powder added group produced higher desirability. Drying methods had significant effects on all attribute of sensory evaluation, natural drying and incubative plate drying produced higher uniformity, denseness and overall desirability.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.294-299
• /
• 2008

Collapse is an abnormal shrinkage resulting in uneven, rough surfaces and/or warping of sawn timber. The maximum abnormal shrinkages of the oak and persimmon specimens were obtained by the quasi-equilibrium drying and were compared with the other drying methods. The effect of steaming and freezing treatments on the shrinkage of wood was also investigated. The Quasi-equilibrium drying used in this study was proved as a good tool to make the maximum abnormal shrinkage of wood. The maximum abnormal volumetric shrinkage possibly caused by collapse could be 16.3% and 14.3% for the oak and persimmon specimens, respectively. In general the steaming-treated specimens shrank less than the controls for the oak specimens, but did more for the persimmon specimens. The volumetric shrinkages of the freezing-treated specimens were more various between the drying methods than those of the control and steaming-treated specimens.