Effects of the Methods of Polyethylene Glycol Impregnation and Drying on the Volumetric Shrinkage of Wood

Polyethylene Glycol 주입방법과 건조방법이 목재 부피수축률에 미치는 효과

  • Lee, Won-Hee (Department of Wood Science and Technology, Kyungpook National University) ;
  • Kang, Chun-Won (Department of Housing Environmental Design, Chonbuk National University) ;
  • Hong, Seung-Hyun (Department of Bio-based Materials, Chungnam National University) ;
  • Kang, Ho-Yang (Department of Bio-based Materials, Chungnam National University)
  • Received : 2015.12.11
  • Accepted : 2016.01.20
  • Published : 2016.01.25

Abstract

PEG (Polyethylene glycol) impregnation in wood reduces the occurrence of checking during kiln drying. The volumetric shrinkages of wood PEG impregnated by pressure (PEG-P) or soaking (PEG-S) methods, and oven-dried by vent (VD) or air-tight (AD) methods were measured and compared with the controls. The average oven-dry weight of PEG impregnated specimens was larger than that of the controls by 3.6 g, but was not influenced by the drying methods. The average of the total volumetric shrinkage of PEG-P-VD specimens was the least (2.3%), while that of CON-S-AD specimens was the largest (28.9%). Within a drying method the total volumetric shrinkage of the control was the largest followed by PEG-S and PEG-P specimens, which implied that residual PEG in wood restrained its shrinkage during drying.

Keywords

References

  1. Alma, M. H., H. Hafizoglu and D. Maldas. 1996. Dimensional stability of several wood species treated with vinyl monimers and polyethylene glycol-1000. International Journal of Polymer Material 32: 93-99. https://doi.org/10.1080/00914039608029385
  2. Bariska, M. 1992. Collapse phenomena in eucalypts. Wood Science and Technology 26: 165-179. https://doi.org/10.1021/es00025a020
  3. Chafe, S. C. 1995. Preheating and continuous and intermittent drying in boards of Eucalyptus regnans: F. Muell. I. Effect on internal checking, shrinkage and collapse. Holzforschung 49: 227-233. https://doi.org/10.1515/hfsg.1995.49.3.227
  4. Hoadley, R. B. 2000. Understanding Wood. The Taunton Press, Inc., CT, USA: 288pp.
  5. Hong, S.-H., C-H. Kim, H.-M. Lim and H.-Y. Kang. 2013. Measuring PEG retentions and EMCs of PEG impregnated softwood specimens after heat-treatment. Journal of the Korean Wood Science and Technology 41(3): 173-180.
  6. Jeremic, D. and P. Cooper. 2009. PEG quantification and examination of molecular weight distribution in wood cell walls. Wood Science and Technology 43(3-4): 317-329. https://doi.org/10.1007/s00226-008-0233-2
  7. Kang, H.-Y. and M.-G. Lee. 2008. Effect of Pretreatments and Drying Methods on Abnormal Shrinkage of Wood. Journal of Korea Furniture Society 19(4): 294-299.
  8. Lee, W.-H., S.-H. Hong and H.-Y. Kang. 2015. Effects of drying temperature and acetylation on the retention of polyethylene glycol in red pine wood disks. Journal of the Korean Wood Science and Technology 43(6): 784-791. https://doi.org/10.5658/WOOD.2015.43.6.784
  9. Loughborough, W. K. 1948. Chemical seasoning: Its effectiveness and present status. U.S. Forest services Forest Products Laboratory Report, D1721.
  10. Mackay, J. F. G. 1972. The cnnurrence, development and control of checking in Tasmanian Eucalyptus obliqua, Holzforshung 26(4): 121-124. https://doi.org/10.1515/hfsg.1972.26.4.121
  11. Ralph, J. 2006. PEG penetration and the effects of PEG pretreatment in air-dried Eucalyptus regnans. Wood and Fiber Science 38(1): 139-143.
  12. Ralph, J. and S. J. Edwards. 2004. PEG penetration in three commercially important Tsmanian Eucalypts. Wood and Fiber Science 36(4): 611-619.
  13. Rasmussen, E. F. 1961. Dry Kiln-Operator's Manual. Forest Products Lab, Forest Service, USDA. 197pp.
  14. Stamm, A. J. 1964. Wood and Cellulose Science. The Ronald Press Company, New York.
  15. Wallstrom, L. and K. A. H. Lindberg. 1995. Wood surface stabilization with polyethyleneglycol, PEG. Wood Science and Technology 29: 109-120.
  16. Yamaguchi, T., Y. Ishimaru and H. Urakami. 1999. Effect of temperature on dimensional stability of wood with polyethylene glycol II: Temperature dependence of PEG adsorption and mechanical properties of treated wood. Mokuzai Gakkaishi 45(6): 441-447.