• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.33-46
• /
• 2006

This study was carried out to investigate a radio-frequency/vacuum (RF/V) drying ability and physical properties of the green boards and the pre-kiln dried boards with 40 mm thickness, and the 70 mm-thick green board of Iroko (Milicia excelsa). The major results were summarized as follows; The drying time from initial moisture content (MC) of 110% to approximate 6% MC for a 40mm-thick green board was 192 hours, and about 200 hours for the 70 mm-thick green board, respectively and so the RF/V drying times were dramatically shortened compared to conventional kiln drying time. The case hardenings at the RF/V drying completion stage test were very negligible, thus represented almost no existence of the residual stress. The checks were very slightly formed on all of the boards during the RF/V drying test, but crook appeared quite severely. During the accelerating test, the water-resistant treated specimens had not experienced any signs of checking occurred, whereas the control boards had encountered very frequent occurrences of end checking and slight surface checking. There were no observations of warping and discoloring regardless of the treatment.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.29-34
• /
• 2015

The photovoltaic ribbon attached the flux reduces the solar module manufacturing process and the pollution. This paper presents an analytical method for solving the continuous flux drying system of photovoltaic ribbon. Also, some experiments of the drying of photovoltaic ribbon are carried out in order to design the drying system. Numerical results indicate the air temperature, the air velocity, the air pressure and the timewise temperature variation of ribbon during drying process. In case of the drier process length is short, 400mm, the photovoltaic ribbon is wet. Thus, another study of drying system is necessary to improve the drying ability. As a result, multi-stage drier system is proposed and shown to be good drying ability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1948-1953
• /
• 2014

This study examined changes in antioxidant activity as well as contents of rosmarinic acid, homoplantaginin, and luteolin, which is the main substance of Salvia plebeia R. Br. (SPR) known to have anti-inflammatory efficacy, according to drying, blanching, and fermentation conditions. Rosmarinic acid content was 16.42 mg/g upon hot-air drying and 10.19 mg/g upon hot-air drying after blanching, and there was no significant difference in the case of leaf and root freezing or cold-air drying. Rosmarinic acid content was 8.69 and 8.15 mg/g in the case of air-drying in the shade and freeze-drying, respectively, and decreased to 0.05 mg/g or undetected after fermentation. SPR processed by freeze-drying, cold-air drying in the shade, and hot-air drying showed ABTS radical scavenging ability over 98.5% at a concentration over $500{\mu}g/mL$ as well as excellent radical scavenging ability of 87.3% in the case of hot-air drying after blanching. Root showed lower ABTS radical scavenging ability than leaves. SOD-like activity was measured to be 6.1~27.8% at a concentration of $1,000{\mu}g/mL$, which was significantly difference from ABTS radical scavenging ability. As rosmarinic acid and homoplantagine, an anti-inflammatory material contained in SPR, are almost undetectable after oxidation fermentation during processing, hot-air drying after blanching or drying seems to be suitable to develop SPR as a functional substance.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.8-13
• /
• 2006

This study was carried out to investigate drying methods for keeping freshness and active components of aerial part of Saururus chinensis. Chopped samples were prepared using hot air drying, hot air drying + roasting, presteamed + hot air drying, freeze drying, and sun drying. Drying time was shorter $88{\sim}93%$ in hot air drying and freeze drying than in sun drying. Percentage of dry matter was higher in the order of freeze drying > sun drying > hot air drying, and moisture content in the order of sun drying > hot air drying > freeze drying. The contents of total phenolics and quercetin related substances were greater in the order of freeze drying > hot air drying > sun drying, while were decreased due to treatments before or after hot air drying. Electron donating ability (EDA) was highest in freeze drying, and showed a little difference between hot air drying and sun drying, but was increased because of treatments before or after hot air drying. In color values, the a value was lower in the order of freeze drying < hot air drying < sun drying. The contents of active components of plant parts of hot air dried were higher in the order of flower >leaf > chopped sample > stem. EDA showed similar tendency with those. The a value was lower in the order of leaf < chopped sample < flower < stem. As a result, freeze drying of chopped samples or hot air drying of leaf and flower were effective to maintain qualities of aerial part of Saururus chinensis.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1315-1324
• /
• 2022

The need for remanufacturing ships and various mechanical components continues to increase along with environmental problems. Research on remanufacturing is being carried out in various fields, but research on cleaning is quite insufficient. In particular, there is no research on the cleaning-ability of diverse mechanical components. In order to increase the life cycle of mechanical components, remanufacturing must be considered from the step of design. Particularly, it is also very important to evaluate the degree of easiness in cleaning to remove various pollutants generated by long-term use quickly as well as easily. In this study, the degree of easiness in cleaning is defined as cleaning-ability. In fact, remanufacturing components can be easily done only when cleaning-ability is set high from the step of design. The purpose of this study is to evaluate the cleaning-ability of ships and various mechanical components. The details of easiness in cleaning are cleaning and drying identification, accessibility to cleaning tools, convenience in cleaning, and convenience in drying. This study presents a quantitative procedure to evaluate cleaning-ability, derived various factors influencing each of the details of easiness and their ranges, and gave scores to the factors according to their ranges. The weight was also calculated for the details of easiness in cleaning and the factors. Lastly, this researcher suggests a scoring procedure to evaluate cleaning-ability quantitatively and the total weight of cleaning-ability.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.246-251
• /
• 2016

This study was performed to determine the effects of drying methods (HD, hot air drying; FD, freeze-drying) on the antioxidant and physiological abilities of Haw (Crataegus pinnatifida Bunge). Powder color values of dried Haw, L and b, were higher for HD, while the chroma values were higher for FD. The total polyphenol, and flavonoid contents of HD Haw and FD Haw were found to be $9.29{\pm}0.50mg\;GAE/mL$ and $15.48{\pm}0.38mg\;GAE/mL$, and $9.41{\pm}0.26mg\;RHE/mL$ and $26.46{\pm}0.34mg\;RHE/mL$, respectively. DPPH radical scavenging abilities at 100 mg/mL concentration were higher for FD (64.90%) than HD (28.66%), as were the reducing power, ABTS radical scavenging ability, and nitrite scavenging ability. However, the HMG-COA reductase of HD (74.67%) was higher than that of FD (72.10%). The ${\alpha}-glucosidase$ inhibitory abilities of HD and FD at a concentration of 0.1 mg/mL were 24.69% and 97.38%, respectively. These results indicate that Haw is a potential functional material and that freeze-drying Haw is better than hot air drying.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.264-271
• /
• 2010

The purpose of this study was to investigate performance evaluation of absorbing and fast-drying fabric after washing. In the comparison of absorption and fast-drying properties, there was slight difference among the materials depending on thickness, weight, and fabric structure. Absorption speed of the materials depended on the frequency of washing which might be caused by modification of fabric structure or composition fiber due to friction during washing. The ability of fast-drying of the materials was gradually decreased with the increase of washing frequency, which might be caused by fatigue accumulation on inner fiber and structural change or destruction with friction during washing.

• Reproductive and Developmental Biology
• /
• v.39 no.3
• /
• pp.69-76
• /
• 2015

In a conventional sense, dried-spermatozoa are all dead and motionless due to the lost of their natural ability to penetrate oocytes both in vivo and in vitro. However, their nuclei are completely able to contribute to normal embryonic development even after long-term preservation in a dried state when the dried-spermatozoa are microinjected into the oocytes. In this sense, dried spermatozoa must still be alive. Thus, defining spermatozoa as alive or dead seems rather arbitrary. Several drying method of sperm including freeze-drying, evaporative/convective-drying and heat-drying were represented in this review. Although the drying protocol reported here will need further improvement, the results suggest that it may be possible to store the male genetic resources.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.145-150
• /
• 2022

Microalgae are attracting attention as a resource for the production of biofuels, food nutrients, biochemicals, and bioplastics. Among a wide range of sources of the biomass, microalgae have been highlighted due to relatively easy cultivation, ability to eliminate carbon dioxide, and low culturing cost. Despite the great potential of microalgal biomass as a biological material, the complexity and relatively expensive downstream processes have inhibited the commercial use of microalgae. In this study, we reviewed recent techniques for microalgal drying for the production of microalgal based products. As drying processes comprise the largest portion of microalgae processing cost, an efficient drying technique is key to the utilization of microalgal biomass.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.708-713
• /
• 2015

To provide the basic data to dry vegetate the sweetpotato leaves, the total contents of tannin, flavonoid and polyphenol in the methanol extract from the hot-air dried sweetpotato leaves were analyzed and DPPH radical scavenging activity, ABTS radical scavenging ability, nitrite scavenging ability, and others were comparatively analyzed. The total tannin content was decreased from Shinmi of 10.87 mg/g at $40^{\circ}C$ to 7.28 mg/g at $70^{\circ}C$ and the total flavonoid was decreased from Hayanmi of 55.37 mg/g at $40^{\circ}C$ to 39.63 mg/g at $70^{\circ}C$. That is, the low temperature drying contained more of these substances than in the high temperature drying. The DPPH radical scavenging activity was the highest in Shinmi and Hayanmi of 84.33% and 85.25% at $40^{\circ}C$, and the ABTS radical scavenging ability was a high value of over 80% in the treatment plot at $40^{\circ}C$. The nitrite scavenging ability was highest in Shinmi and Hayanmi of 76.15% and 73.74% at $40^{\circ}C$ but low at $70^{\circ}C$. That is, the antioxidant effect of the hot-air dried sweetpotato leaves was high in the sample of $40^{\circ}C$ and low in the sample of $70^{\circ}C$. Affected by the drying temperature, the high antioxidant effect is resulting from the little decrease of active ingredient when drying at low temperatures.