• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.139-154
• /
• 2023

Red-bed soft rock is a common stratum and it is necessary to evaluate the mechanical properties and bearing capacity of red-bed soft rock mass affected by different environmental effects. This paper presents a complete procedure for evaluating the bearing capacity of red-bed soft rock by means of geophysical exploration and in-situ rock mechanics tests. Firstly, the thickness of surface loosened rock mass of red-bed soft rock was determined using geophysical prospecting method. Then, three environmental effects, including natural weathering effect, dry-wet cycling effect and concrete sealing effect, were considered. After each effect lasted for three months, in-situ rock mass mechanical tests were conducted. The test results show that the mechanical properties of rock mass considering the sealing effect of concrete were maintained. After considering the natural weathering effect, the mechanical parameters decrease to a certain extent. After considering the effect of dry-wet cycling, the decreases of mechanical parameters are the most significant. The test results confirm that the red-bed soft rock dam foundation rock mass will be significantly affected by various environmental effects. Therefore, combined with the mechanical test results, some useful implementations are proposed for the construction of a red-bed soft rock dam foundation.

• Journal of Ecology and Environment
• /
• 제43권4호
• /
• pp.376-384
• /
• 2019

Background: Nutrient release during litter decomposition was investigated in Vitex doniana, Terminalia avecinioides, Sarcocephallus latifolius, and Parinari curatellifolius in Makurdi, Benue State Nigeria (January 10 to March 10 and from June 10 to August 10, 2016). Leaf decomposition was measured as loss in mass of litter over time using the decay model W_t/W₀ = e-^{kd t}, while $Kd=-{\frac{1}{t}}In({\frac{Wt}{W0}})$ was used to evaluate decomposition rate. Time taken for half of litter to decompose was measured using T₅₀ = ln ²/k; while nutrient accumulation index was evaluated as $NAI=(\frac{{\omega}t\;Xt}{{\omega}oXo})$. Results: Average mass of litter remaining after exposure ranged from 96.15 g, (V. doniana) to 78.11 g, (S. lafolius) in dry (November to March) and wet (April to October) seasons. Decomposition rate was averagely faster in the wet season (0.0030) than in the dry season (0.0022) with P. curatellifolius (0.0028) and T. avecinioides (0.0039) having the fastest decomposition rates in dry and wet seasons. Mean residence time (days) ranged from 929 to 356, while the time (days) for half the original mass to decompose ranged from 622 to 201 (dry and wet seasons). ANOVA revealed highly significant differences (p < 0.01) in decomposition rates and exposure time (days) and a significant interaction (p < 0.05) between species and exposure time in both seasons. Conclusion: Slow decomposition in the plant leaves implied carbon retention in the ecosystem and slow release of CO₂ back to the atmosphere, while nitrogen was mineralized in both seasons. The plants therefore showed effectiveness in nutrient cycling and support productivity in the ecosystem.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.10-18
• /
• 2018

본 연구는 시멘트 모르타르속에 매입된 철근주위가 건조될 때 불안정한 전류분포의 영향을 측정하고, 교류 임피던스 특성변화에 대한 영향을 고찰하는 것을 목적으로 한다. 건조과정중 철근의 전기화학적 반응을 측정하기 위해, 두 개의 철근이 매입된 3개의 시멘트 모르타르가 실험을 위해 준비되었다. 주요 변수는 20mm 모르타르 두께를 동일하게 가지도록 하여, 두 철근사이의 간격이 10, 20과 30mm가 되도록 하였다. 해양환경에서 콘크리트 구조물속의 철근 부식속도를 가정하기 위해서, 3개의 모르타르 시험체는 15 사이클의 침지-건조환경(해수에서 24시간 침지와 48시간 실온 건조)에 노출되었다. 부식전위의 변화는 건조중에 용존산소의 확산속도 증가로 인해 귀한 방향으로 이동하는 것이 관찰되었다. 침지-건조환경에서 교류 임피던스는 100kHz에서 1mHz까지 측정되었다. 철근과 모르타르사이의 계면상태를 설명하기 위해 이론적 모델이 제안되었으며, 그것은 용액저항, 전하이동저항과 CPE로 구성된 등가회로를 사용하였다. 철근의 부식이 진행됨에 따라, 저주파수 영역에서 확산 임피던스가 나타났다. 침지-건조 환경중 건조과정에서 이송차가 $45^{\circ}$에 가까워지는 현상으로써 전류분포가 불균일해지는 경향을 보였다.

• Asian Journal of Atmospheric Environment
• /
• 제11권3호
• /
• pp.202-216
• /
• 2017

Nitrogen (N) is an essential macronutrient. Thus, evaluating its flows and stocks in rice paddy ecosystems provides important insights into the sustainability and environmental loads of rice production. Among the N sources of paddy fields, atmospheric deposition and irrigation inputs remain poorly understood. In particular, insufficient information is available for atmosphere-rice paddy exchange of gaseous and particulate reactive N (Nr, all N species other than molecular N) which represents the net input or output through dry deposition and emission. In this study, we assessed the N inputs via atmospheric deposition and irrigation to a Japanese rice paddy area by weekly monitoring for 2 years with special emphasis on gas and particle exchange. The rice paddy during the cropping season acted as a net emitter of ammonia ($NH_3$) to the atmosphere regardless of the N fertilizer applications, which reduced the effects of dry deposition to the N input. Dry N deposition was quantitatively similar to wet N deposition, when subtracting the rice paddy $NH_3$ emissions from N exchange. The annual N inputs to the rice paddy were 3.2 to $3.6\;kg\;N\;ha^{-1}\;yr^{-1}$ for exchange, 8.1 to $9.8\;kg\;N\;ha^{-1}\;yr^{-1}$ for wet deposition, and 11.1 to $14.5\;kg\;N\;ha^{-1}\;yr^{-1}$ for irrigation. The total N input, 22.8 to $27.5\;kg\;N\;ha^{-1}\;yr^{-1}$, corresponded to 38% to 55% of the N fertilizer application rate and 53% to 67% of the brown rice N uptake. Monitoring of atmospheric deposition and irrigation as N sources for rice paddies will therefore be necessary for adequate N management.

• 한국건축시공학회지
• /
• 제14권4호
• /
• pp.359-368
• /
• 2014

Photocatalytic cement has been receiving attention due to its high oxidation power that reduces nitrogen oxide, thus contributing to a clean atmospheric environment. However, there has not yet been a thorough investigation on the effect of photocatalytic reactions on the durability of cementitious material, the parent material. In this study, photocatalytic cement samples were exposed to nitric oxide gas and UV along with cycles of wetting and drying to simulate environmental conditions. The surface of samples was characterized mechanically, chemically, and visually during the cycling. The results indicate that that the photocatalytic efficiency decreased with continued NO oxidation. The pits found from SEM indicated that chemical deterioration, such as acid attack or leaching, did occur. However, this was not confirmed by X-ray diffraction. The hardness was not affected, probably due to the formation of CSH as evidenced by the XRD pattern. In conclusion, it was found that photocatalysis could alter cementitious materials both chemically and mechanically, which could further affect long-term durability.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.462-469
• /
• 2021

Tin/graphite composites are prepared as anode materials for Li-ion batteries using a dry ball-milling process. The main experimental variables in this work are the ball milling time (0-8 h) and composition ratio (tin:graphite=5:95, 15:85, and 30:70 w/w) of graphite and tin powder. For comparison, a tin/graphite composite is prepared using wet ball milling. The morphology and structure of the different tin/graphite composites are investigated using X-ray diffraction, Raman spectroscopy, energy-dispersive X-ray spectroscopy, and scanning and transmission electron microscopy. The electrochemical properties of the samples are also examined. The optimal dry ball milling time for the uniform mixing of graphite and tin is 6 h in a graphite-30wt.%Sn sample. The electrode prepared from the composite that is dry-ball-milled for 6 h exhibits the best cycle performance (discharge capacity after 50^th cycle: 308 mAh/g and capacity retention: 46%). The discharge capacity after the 50^th cycle is approximately 112 mAh/g, higher than that when the electrode is composed of only graphite (196 mAh/g after 50^th cycle). This result indicates that it is possible to manufacture a tin/graphite composite anode material that can effectively buffer the volume change that occurs during cycling, even using a simple dry ball-milling process.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.156-161
• /
• 1997

The biogeochemical cycle of silver has rarely been reviewed, even though the silver ion (Ag$^{\times}$) is extremly toxic to some organisms. Its concentration is still rising sharply because of increased anthropogenic activity, specifically the discharge from the film industry (mainly, silver thiosulfate: Ag (S$_2$O$_3$)${^3-}_2$). Recently, a number of researchers have quantified the major fluxes and reservoirs of silver in the open ocean, bays, and estuaries. A review of the available information for Ag cycling in the open ocean shows that the riverine input (from human activity and weathering processes: 7${\times}$10$^6$ kg/yr and 5${\times}$10$^6$ kg/yr, respectively) is the dominant source of Ag to estuarine and coastal regions. Most of the silver (90% of riverine input silver) is removed in coastal sediments by the physical-chemical character of silver due to its high partitioning with particulate matter. On the other hand, in the open ocean the atmospheric input (wet and dry deposition: 1.48${\times}$10$^6$ kg/yr and 1.94${\times}$ 10$^5$ kg/yr, respectively) becomes more important as a source of silver than riverine input. The residence time of silver calculated from available data is 1250 yrs in the deep ocean below 500 m, but only 3 yrs in the surface ocean.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.385-390
• /
• 2005

The effect of the Wolsong Tritium Removal Facility on the change of tritium concentration in the soil water was assessed by introducing a dynamic compartment model. For the mathematical modeling, the tritium in the environment was thought to come from two different sources. Three global tritium cycling models were compared with the natural background concentration. The dynamic compartment model was used to model the behavior of the tritium from the nuclear power plants at the Wolsong site. The source term for the dynamic compartment model was calculated with the dry and wet deposition rates. The area around the Wolsong nuclear power plants was represented by the compartments. The mechanisms considered in deriving the transfer coefficients between the compartments were evaporation, runoff, infiltration, hydrodynamic dispersion, and groundwater flow. We predicted what the change of the tritium concentration around the Wolsong nuclear power plants would be after future operation of the tritium removal facility to show the applicability of the model. The results showed that the operation of the tritium removal facility would reduce the tritium concentration in topsoil water quickly.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권1호
• /
• pp.64-75
• /
• 2013

실내촉진실험과 동시에 현장폭로실험을 병행하였기 때문에 연차별 실험계획에 따라 최근 5년차의 현장실험체 분석을 수행하고 모델을 업그레이드하는 과정에서 모델 검증을 위해 준공된 지 30년 가량된 방조제의 배수갑문콘크리트의 염화물 침투프로파일을 분석하였다. Zhang의 연구결과에서 언급된 표면에 가까운 콘크리트내부 염화물 농도를 기본모델의 표면염화물농도 대신으로 적용하였다. 장기간 노출되는 실험체의 염화물 측정자료 분석에서 확산계수의 변화분석을 통하여 Maage의 제안식을 기본모델에 적용하였다. 이렇게 보완된 수정모델을 통하여 예측된 자료와 현장자료를 비교하고, 임계시점, 즉 보수시점을 도출함으로서 본 연구의 제안모델과 유지보수 시스템이 간만대 염화물 침투프로파일 추정과 적정보수 시점 및 비용 예측에 사용될 수 있음을 보였다.

• 콘크리트학회논문집
• /
• 제22권6호
• /
• pp.867-873
• /
• 2010

이 연구에서는 강섬유로 보강된 철근콘크리트에서의 부식 특성에 관한 실험적 연구를 수행하였다. 먼저 강섬유의 보강콘크리트의 수송특성, 즉 공극률, 흡수성, 투과성 및 염소이온 확산성에 관한 실험을 수행하여 철근부식과 의 관계를 비교 평가 하였다. 강섬유의 보강으로 인해 약간의 압축강도 증가와 함께, 흡수성, 투과성 및 확산성에 관한 실험 결과에서도 콘크리트 내부로의 유해물질의 침투저항성이 크게 증가하는 것으로 나타났다. 철근부식과의 관계에서는 예상된 결과와는 다르게 강섬유의 혼입이 철근부식을 가속화 시키는 경향이 나타났다. 염화나트륨 용액이 침투하는 노출면에서는 강섬유의 부식팽창으로 인한 표면박리현상이 관찰되었으며, 철근부위 절단면에서는 철근 주변에 강섬유의 부식이 국부적으로 관찰 되었다. 고온 및 고농도의 염화물 환경에서의 건습 싸이클링이 노출표면에 가까운 공극에서 지속적으로 염분결정체의 증가와 더불어 내부공극에서의 강섬유의 부식으로 증가된 압력이 표면 박리를 일으킨 것으로 보인다. 결과적으로는 노출면 부근에서의 미세균열을 증가가 물, 염화이온 및 산소의 침투를 보강근으로의 가속화를 진행 시킨 것으로 판단이 된다. 이 연구에서는 강섬유로 보강된 철근콘크리트에서 철근부식에 영향을 주는 명확한 메커니즘은 충분히 규명이 되지 않았으며, 보다 명확한 관계를 이해하기 위해서는 부식과정에서 강섬유의 잠재적인 부식팽창에 관한 보다 상세한 실험적 연구가 필요할 것으로 판단되어 진다.