• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.56-59
• /
• 2000

In this paper, we have made a comparison between secondary ion mass spectroscopy(SIMS) data by the 5kcV-15keV boron implantation and computer simulation results. In order to make electrical activation of implanted carriers, thermal annealing are carried out by RTP method for 30s at 1000$^{\circ}C$ Two dimensional doping concentration distribution from different mask dimensions under inert gas annealing, dry-, and wet-oxidation condition were calculated and simulated with microtec simulator.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.96-96
• /
• 2003

In this article modification of wool fibers and fabrics by pulse corona discharge and enzymes, in particular purified keratinase with a single component has been carried out to improve their surface properties. The shrinkproofing, tensile strength, weight loss, and the primary hand values calculated from the mechanical properties of the dual treated wool fabrics were investigated. In addition, the surface morphology of wool fiber was observed under the dry and wet conditions using an environmental SEM, ESEM.

• Biomedical Science Letters
• /
• v.10 no.2
• /
• pp.129-135
• /
• 2004

The study was carried out through measuring the temperature and humidity of the indoor/outdoor space and the distribution of interior thermal condition, and investigating the effect of loess materials on human body. The purpose of this study is to analyze the change of dry bulb temperature and relative humidity and correlation of thermal reaction of human body with ASHRAE (American Society of Heating, Refrigerating and Air-conditioning) comfort chart in the loess interior space. In the view point of biomedical sciences, loess interior space provides optimum thermal conditions for human thermal sensation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.230-235
• /
• 1996

The new concept of dry area formation based on Poisson distribution of active nucleation sites and the concept of the critical active site density is presented. A simple statistical model is developed to predict the change of slope of the boiling curve up to critical heat flux (CHF) quantitatively. The predictions by the present model are in good agreement with the experimental data. Also it turns out that the present model well explains the mechanism on how the surface wettability influences CHF.

• Korean Journal of Pharmacognosy
• /
• v.27 no.4
• /
• pp.354-358
• /
• 1996

This experiment was conducted to find out the effects of L-phenylalanine on the saikosaponin content of callus induced from Bupleurum falcatum leaf segments. In the fresh and dry weight of callus, the addition of 2,4-D than L-phenylalanine was significantly effective. However, the L-phenylalanine treatment rather than 2,4-D was effective for high saikosaponin accumulation in the callus of Bupleurum falcatum.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.65-80
• /
• 1996

Ink trap is one of the important factors to determine the color in multi-color overprints. This study was carried out for the purpose for analyzing the relationships between ink traps and color differences in two-color solid overprints. The specimens were printed under four different conditions that the overprinting ink sequence of M(Magenta) or C(Cyan) and the overprinting method of W(Wet-on-Wet) or D(Wet-on-Dry) were changed altermately, that is M+C-W or C+M-W and M+C-D or C+M-D.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.95-102
• /
• 1995

작동유체로서 비등점이 서로 다른 2종류, 즉 2성분 혼합물을 사용한 2상 밀폐 열싸이폰은 단일성분의 열싸이폰 보다 공학적으로 우수한 성능을 갖는다. 따라서 상 분리 현상이 나타나지 않은 안정적인 혼합물인 물/에탄올의 혼합물을 작동유체로 사용한 열싸이폰의 작동특성이 실험적으로 수행되었다. 실험에서는 시동성, 정상상태 작동, 경사시 작동특성 및 열전달 한계(Dry-out) 등에 관한 2성분 열싸이폰의 작동특성에 관해서 고찰되었다.

• Archives of Pharmacal Research
• /
• v.5 no.2
• /
• pp.93-96
• /
• 1982

By using recemic 3-bromo-5-isobutyl-5-methylhydantoin (3a') in dry N, N-dimethylformamide which is a model reagent for asymmetric bromolactonization, bromolactonization of a series of olefinic acids was carried out to furnish corresponding bromolactones in moderate yields.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.206-211
• /
• 1987

The photoreaction of 5,7-dimethoxycoumarin with adenosine has been carried out in a dry film state. The mixture of DMC and adenosine was irradiated with 350 nm UV light and two major products were isolated. The structure was determined by various spectroscopic measurements involving $^{13}C$ nuclear magnetic resonance and fast atom bombardment mass spectrometry. These addition products were produced by covalent bond formation between the pyrone ring at carbon 3 or 4 and the sugar ring moiety of adenosine at carbon 5'.

• Journal of the Korean earth science society
• /
• v.35 no.6
• /
• pp.401-411
• /
• 2014

In order to enhance the Au Ag leach rate, a mechanochemical activation process and a mixed thiourea-thiocyanate solution has been applied to Au concentrate. To achieve mechanochemical activation, the Au concentrate was mechanically ground using a dry and a wet process. The results of a particle size distribution analysis and an XRD analysis, average particle size and crystallite size were much smaller in the dry-sample than in the concentrate sample. As well the size was smaller in the wet-sample than in the dry-sample. In SEM and XRD analysis, the amorphization effect was observed in the wet-sample due to mechanochemical activation. Au Ag leaching experiments were carried out with a thiourea solution, a thiocyanate solution and a mixed thiourea-thiocyanate solution. The Au Ag leach rate was much greater in the dry-ground-sample than in the concentrate sample, and the leach rate was greater in the wet-ground-sample than in the dry-sample. The Au Ag leach rate was much greater in the thiocyanate solution than in the thiourea solution, and the leaching rate was much greater in the mixed thiourea-thiocyanate solution than in the thiocyanate solution. Up to a 99% leach rate for Au Ag were only achieved in the wet-sample using the mixed thiourea-thiocyanate leaching solution.