• 한국해양바이오학회지
• /
• 제2권3호
• /
• pp.198-200
• /
• 2007

Cultivation of a $Q_{10}$-producing photosynthetic bacterium, Rhodobacter sphaeroids, was carried out in a 1-L flask to characterize its cellular growth reaction. The result of experiment showed that dissolve oxygen in the broth was depleted within 7 h. ORP decreased with decrease of DO, and recovered somewhat with increase of pH. The growth of R. spahaeroids reached at late-log phase in 140 h of reaction. The final pH and dry-cell weight were 7.62 and 2.2 mg/mL, respectively. The $Q_{10}$ content in the final broth was 2.35 mg/g dry cell weight, which was higher than that obtained in tube culture.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.57-64
• /
• 2005

This paper is the study on dry sliding wear behavior of carbon fiber reinforced epoxy matrix composites against lay-up orientation. Tests were investigated on the effect of the lay-up orientation, fiber sliding direction, load and sliding velocity when circumstance keep continuously at $21^{\circ}C$, 60%RH. Pin-on-disk dry sliding wear tests for each experimental condition were carried out with a carbon fiber reinforced plastic pin on stainless steel disk in order to search the friction and wear characteristics. The wear rates and friction coefficients against the stainless steel counterpart were experimentally determined and the wear mechanisms were microscopically observed. The effect on friction and wear behavior are observed differently, according to various conditions. When sliding took place against counterpart, the highest wear resistance and the lowest friction coefficient were observed in the $[0]_{24s}$ lay-up orientation at anti-parallel direction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.89-91
• /
• 1996

In dry-winding(unfilled) superconducting magnets, the behavior of liquid helium occupying the extremely small void space within the winding is contributed as a primary factor for transient stability of magnets. Therefore, numerical experiments have been carried out concerning the influences of transient heat transfer of liquid helium ocupying the void space in the winding and thermal properties of insulation at the conductor surface on the transient stability of magnets, by using three-dimensional finite element method(FEM). In this paper, we are going to consider three different cases for heat transfer characteristics of liquid helium to observe the influences of the rest of liquid helium in void space within the winding on the transient stability.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.37-42
• /
• 1995

This experiment was canied out to study the effects of seeding and harvesting dates on the growth of early and late maturing rye(Seca1e cereale L.) varieties at the forage testing field of S.N.U., Suweon, from September 1986 to May 1989. Leaf and tiller numbers of rye per plant were increased with earlier seeding date, but no difference in the tiller numbers was found between harvesting dates of early and late maturing rye varieties. Tiller dry weight of an early maturing rye veriety, Wintermore was higher than that of a late maturing rye variety, Kodiak when sown as early as September. Maximun leaf area index(LA1) and leaf area index duration(LA1D) were achieved with earlier seeding and early maturing rye varieties. A higher correlation between the maximum LA1 or LAID and dry matter accumulation of rye varieties was observed in this experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1051-1054
• /
• 2002

Environmentally conscious machining and technology have been taking more and more important position in machining process. Since cutting fluid has some impact on environment, many researches are being carried out to minimize the use of cutting fluid. It can be Increased the environmental pollution through not using coolant any more or minimizing it. In this study, the cooling effects of cutting methods using the compressed cold air, dry cutting and cutting fluid will investigate in the blade machining. In order to examine the characteristics of cutting and tool in the environmentally conscious machining, this work investigates experimentally the degree of tool wear, cutting force and characteristics of surface roughness in relation to machining conditions and cooling methods.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.347-359
• /
• 1996

A study was carried out on the distribution of chlorophyll a and water quality in the dry season in Yosuhae bay and adjoining sea, Southern Korea, in July of 1994. Concentration of salinity and phosphate were lower in the outer bay than in the inner bay. While nitrate and silicate were higher in the former than in the latter. We were identified with coastal waters of origin from China with the lower salinity in outer bay. The China coastal water was characteristic of high nutrients and phytoplankton biomass, such as chlorophyll a. The principal component analysis-(PCA) on the analytical data proved that high density of phytoplankton biomass , occurred under the condition of low salinity and high concentration of nissoived Inorganic nutrients. It is thought that the thermoharine structure and biological produtions of Yosuhae bay were controlled by the China coastal water in the outer bay.

• 환경생물
• /
• 제21권4호
• /
• pp.428-438
• /
• 2003

Benthic marine algal community of Hakampo in the western coast of Korea was investigated qualitatively and quantitatively. Seasonal assessments of species composition, biomass, dominant species in biomass and vertical distributional pattern were carried out from spring to winter. A total of 121 species was identified; 6 blue-green, 18 green, 16 brown, 81 red algae. In three sites investigated, 96 species were collected at Bunjeomdo, 75 at Maoe, and 57 at Doranggol, respectively. Dermocarpa sp. and Acrochaetium microscopicum were collected for the first time in Korea through this investigation. Dominant species in specific proportions of biomass were Sargassum thunbergii, Gloiopeltis furcata, Corallina spp., Symphyocladia latiuscula and Monostroma nitidum. Seasonal fluctuations of mean biomass were 31.59-427.69 g dry wt$.$$\mu \textrm m^{-2}$ at Bunjeomdo and 20.98-473.48 g dry wt$.$$\mu \textrm m^{-2}$ at Maoe, respectively, which were comparatively high in the western coast of Korea. Vertical distribution in intertidal zones was Gloiopeltis furcata-Gloiopeltis furcata and Corallina spp.-Corallina spp. and Sargassum thunbergii.

• 한국초지조사료학회지
• /
• 제16권1호
• /
• pp.75-80
• /
• 1996

The corn is one of the most important forage crop in Korea. The harvest time for silage affects dry matter (DM) yield and silage quality. This study was carried out to determine the effect of harvest time on the DM yield and nutritive value of corn forage at the Experimental Livestock Farm, College of Agriculture and Life Sciences, Seoul National University, Suweon in 1991. Forage DM yield and DM content of corn forage significantly increased mainly due to increase of ear. And also the ear to total DM ratio increased from 30% to 55% as the harvest was delayed. Chemical composition of the corn forage was improved by reduction in crude fihr, neutral detergent fiber and acid detergent fiber as the harvest was delayed. This results indicated that the harvest time of corn forage plays an important role to determine DM yield and DM contents for silage materials.

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.34-38
• /
• 1989

This research was carried out to elucidate on standing crops , dry matter yields , the nutritive value and in vitro digestihility according to mowing frequency and period during the growing season in the 3cm moving plot in Korean Lawn , Zoysia japonica Sheud . The increasing tendency in the standing crops was showed yield from May to Septemher . In the dry matter yield , there was a tendency of rapid increase from May to August ( maximum level ). Afterwards there appeared a tendency of decrease slight ( Table 3). The nutritive value and in vitro digestihility ; The crude protein and crude fat in the 3cm moving plot showed a tendency of slight decrease as a moving period and frequency . On the other hand , Neutral detergeat fiber , Acid detergent fiber and cellulose showed a tendency of slight increase as mowing period and frequency . in vitro digestibility appeared a rapid decreasing rate as a mowing period and frequency was delayed (table 2.4).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.233-236
• /
• 2012

In order to estimate the efficiency of an evaporative heat exchanger having mini channel, the equations to calculate heat exchanger properties, those are air temperatures and water temperatures etc, are derived from the governing equations based on the Navier-Stokes equation, even though there are several assumptions to make problem simplify. There are three heat transfer zones at the mini channel heat exchanger depending on the water condition. So, there are three governing equations and solutions to calculate the properties. As a results of this study, the equations to calculate a saturation point and a dry point are derived to evaluate an evaporative heat exchanger having micro channel. It is supposed to predict the performance and evaluate a mini channel heat exchanger.