• 방사성폐기물학회지
• /
• 제2권3호
• /
• pp.175-180
• /
• 2004

In order to vitrify the combustible dry active waste (DAW) generated from Korean Nuclear Power Plants, a glass formulation development based on waste composition was performed. A borosilicate glass, DG-2, was formulated to vitrify the DAW in an induction cold crucible melter (CCM). The processability, product performance, and volume reduction effect of the candidate glass were evaluated using a computer code and were measured experimentally in the laboratory and CCM. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. Start-up and maintaining glass melt of the candidate glass were favorable in the CCM. The product of the glass product such as chemical durability, phase stability, and density was satisfactory. The vitrification process using the candidate glass was also evaluated assuming that it was operated as economically as possible.

• 센서학회지
• /
• 제30권5호
• /
• pp.279-285
• /
• 2021

Recently, cesium tellurium iodine (Cs₂TeI₆) has emerged as an inorganic halide perovskite material with potential application in optoelectronic devices due to its high absorption coefficient, suitable bandgap and because it consists of nontoxic and earth-abundant elements. However, studies on its fabrication process as well as photoresponse characteristics are limited. In this study, a simple and effective method is introduced for the synthesis of Cs₂TeI₆ thin films by a two-step dry process. A Cs₂TeI₆-based lateral photosensor was fabricated, and its photoresponse characteristics were explored under laser illuminations of four different wavelengths in the visible range: 405, 450, 520, and 655 nm. The initial photosensing results suggest potential application and can lead to more promising studies of Cs₂TeI₆ film in optoelectronics.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.12-19
• /
• 1994

An electrically heated experimental lumber dry kiln was retrofitted with a computer-based control system to control kiln conditions more precisely and monitor and record several kiln variables. Flat-sawn 2.5cm-thick Pinus densiflora boards were dried in constant temperature process(65$^{\circ}C$ & 50~60 %RH) and continuously rising temperature process, respectively. The average drying rate in continuously rising temperature process was 5.7 %/hr, which was above 3 times faster than that in constant temperature process. But, the average rate of case-hardening and moisture difference between shells and cores of boards dried in continuously rising temperature process were 82 % and 5.5 %, respectively, which were much larger than those of boards dried in constant temperature process.

• Journal of Veterinary Science
• /
• 제22권1호
• /
• pp.14.1-14.11
• /
• 2021

Background: Quantitation of urine protein is important in dogs with chronic kidney disease. Various analyzers are used to measure urine protein-to-creatinine ratios (UPCR). Objectives: This study aimed to compare the UPCR obtained by three types of analyzers (automated wet chemistry analyzer, in-house dry chemistry analyzer, and dipstick reading device) and investigate whether the differences could affect clinical decision process. Methods: Urine samples were collected from 115 dogs. UPCR values were obtained using three analyzers. Bland-Altman and Passing Bablok tests were used to analyze agreement between the UPCR values. Urine samples were classified as normal or proteinuria based on the UPCR values obtained by each analyzer and concordance in the classification evaluated with Cohen's kappa coefficient. Results: Passing and Bablok regression showed that there were proportional as well as constant difference between UPCR values obtained by a dipstick reading device and those obtained by the other analyzers. The concordance in the classification of proteinuria was very high (κ = 0.82) between the automated wet chemistry analyzer and in-house dry chemistry analyzer, while the dipstick reading device showed moderate concordance with the automated wet chemistry analyzer (κ = 0.52) and in-house dry chemistry analyzer (κ = 0.53). Conclusions: Although the urine dipstick test is simple and a widely used point-of-care test, our results indicate that UPCR values obtained by the dipstick test are not appropriate for clinical use. Inter-instrumental variability may affect clinical decision process based on UPCR values and should be emphasized in veterinary practice.

• 방사성폐기물학회지
• /
• 제5권4호
• /
• pp.339-350
• /
• 2007

전세계 주요 원자력선진국들의 사용후핵연료 처리에 대한 기술 및 정책현황을 알아보고 향후 우리나라의 연구방향을 제시해 보았다. 재처리 정책을 가진 소위 핵연료주기 국가들은 최근 선진핵 연료주기기술에 기초한 새로운 사용후핵 연료 관리정책을 발표하였다. 그 정책은 사용후핵연료 내에 함유된 우라늄 또는 초우란 원소들을 재순환하고 고독성의 방사성 물질 및 장반감기를 가진 물질들을 소멸하거나 단반감기 원소로 변환하는데 초점을 맞추고 있다. 이러한 정책은 원자력의 자원 활용성을 높일 뿐만 아니라, 영구 처분할 고준위폐기물의 양을 감소시켜 궁극적으로 원자력의 지속가능성을 높여 준다. PUREX 방법에 기초한 습식재처리를 우선순위로 선택한 대부분의 국가들은 이 습식방법이 건식방법에 비해 실용화에 앞서 있음을 그 선택 의 근거로 든다. 그러나 습식방법은 건식에 비해 핵확산저항성 측면에서 더욱 민감하다. 왜냐하면 이 습식방법은 약간의 공정수정에 의해 순수 플루토늄을 회수 할 수 있기 때문이다. 반면에 아직까지 실용화 단계까지는 도달해 있지 않지만 고온 용융염을 사용하는 Pyroprocess와 같은 건식처리 방법은 순수한 플루토늄을 회수 할 수 없어서 핵비확산성 측면에서 유리하며, 제4세대 원자로로 고려되는 고속로의 핵연료주기 등에도 여러 가지 이점을 가지고 있다. 따라서 우리나라의 경우 현재 이 Pyroprocess에 대한 연구가 활발히 진행되고 있다.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.305-314
• /
• 1998

In the drying process, many undesirable physicochemical changes occur that influence dried food product qualities. Pretreatments method is used to reduce the deterioration of dried food product qualities such as color, flavor, texture, rehydration ability and retention of nutrients. The methods of pretreatments are blanching, chemical treatment and osmotic dehydration. Osmotic dehydration is a water removal process which is based on placing foods in a concentrated osmotic solution or in a dry osmotic material. A large number of process variables have a significant effect on process and final product quality. In order to improve final product quality it is necessary to know the role of each process variable and understand the mecanisms throughout the process. Osmotic dehydration is a valuable processing tool with great future in minimal processing of fruits and vegetables.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.459-459
• /
• 2012

Recently, the discharge of global warming gases in dry etching process of TFT-LCD display industry is a serious issue because perfluorocarbon compound (PFC) gas causes global warming effects. PFCs including CF4, C2F6, C3F8, CHF3, NF3 and SF6 are widely used as etching and cleaning gases. In particular, the SF6 gas is chemically stable compounds. However, these gases have large global warming potential (GWP100 = 24,900) and lifetime (3,200). In this work, we chose C3F6O gas which has a very low GWP (GWP100 = <100) and lifetime (< 1) as a replacement gas. This study investigated the effects of the gas flow ratio of C3F6O/O2 and process pressure in dual-frequency capacitively coupled plasma (CCP) etcher on global warming effects. Also, we compared global warming effects of C3F6O gas with those of SF6 gas during dry etching of a patterned positive type photo-resist/silicon nitride/glass substrate. The etch rate measurements and emission of by-products were analyzed by scanning electron Microscopy (SEM; HITACI, S-3500H) and Fourier transform infrared spectroscopy (FT-IR; MIDAC, I2000), respectively. Calculation of MMTCE (million metric ton carbon equivalents) based on the emitted by-products were performed during etching by controlling various process parameters. The evaluation procedure and results will be discussed in detail.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.486-491
• /
• 2014

본 연구에서는, 유기용매를 사용하지 않는 친 환경적인 건식 공정과 초임계 공정을 이용한 Thin-multiwalled carbon nanotube (TWNTs)/아민계 에폭시 첨가제의 복합체 제조에 관하여 연구를 하였다. 제조된 TWNTs/아민계 에폭시 첨가제의 복합체는 우레탄기반의 비스페놀 A 타입의 에폭시 레진의 경화제로 사용하였다. TWNTs/아민계 에폭시 첨가제의 복합체를 경화제로 사용하여 제조된 에폭시 레진의 열적 성질을 Dynamic mechanical analysis (DMA)를 이용하여 분석 하였으며, 메트릭스상의 carbon nanotube의 높은 분산성은 SEM을 통하여 확인 하였다. 그 결과, 초임계 공정을 이용하여 제조된 에폭시 레진의 열적 성질과 매트릭스내의 carbon nanotube 분산성이 건식 공정을 사용 하였을 때 보다 더욱 증가된 결과를 확인 할 수 있었다.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.447-455
• /
• 2014

본 연구에서는 4H-SiC MOSFET의 주요 문제점인 $SiC/SiO_2$ 계면의 특성을 향상시키기 위해 PECVD (plasma enhanced chemical vapor deposition) 공정을 이용하여 n-based 4H-SiC MOS Capacitor를 제작하였다. 건식 산화 공정의 낮은 성장속도, 높은 계면포획 밀도와 $SiO_2$의 낮은 항복전계 등의 문제를 극복하기 위하여 PECVD와 NO어닐링 공정을 사용하여 MOS Capacitor를 제작하였다. 제작이 끝난 후, MOS Capacitor의 계면특성을 hi-lo C-V 측정, I-V 측정 및 SIMS를 이용해 측정하고 평가하였다. 계면의 특성을 건식 산화의 경우와 비교한 결과 20% 감소한 평탄대 전압 변화, 25% 감소한 $SiO_2$ 유효 전하 밀도, 8MV/cm의 증가한 $SiO_2$ 항복전계 및 1.57eV의 유효 에너지 장벽 높이, 전도대 아래로 0.375~0.495eV만큼 떨어져 있는 에너지 영역에서 69.05% 감소한 계면 포획 농도를 확인함으로써 향상된 계면 및 산화막 특성을 얻을 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.7-12
• /
• 2003

When the wind turbine is used in cold regions, the mechanical properties and dimension stability of the blade will be changed. The proposal of this paper is to test the durability of the blade for wind turbine. It is necessary to select the most comfortable materials and fabrication processes for more stable wind turbine blade in cold regions. To select the most comfortable materials and processes, the static strength has to know through the tensile static tests at the severe condition as cold regions. First, the tensile static specimens made by RIM (Resin injection molding) process & vacuum bagging process with reinforcement materials and resin. Tensile static tests were carried out on three laminate lay-ups (carbon prepreg, carbon fiber dry fabric and glass fiber dry fabric) at different test temperature($24^{\circ}$, $-30^{\circ}$), determining properties such as the mechanical strength, stiffness and strain to failure. At different test temperature, in order to test the tensile strengths of these specimens used the low temperature chamber. Next, the results of this test were compared with each other. Finally, the most comfortable materials and fabrication processes can select based on these results. The results show the changes in the static behavior of three laminate lay-ups at different test temperatures. At low temperatures, the static strengths are higher than the ones at room temperature.