• 펄프종이기술
• /
• 제48권2호
• /
• pp.99-105
• /
• 2016

The increase of wet web solid content after wet press and dry compressive strength were observed in lab study by judicious application of wood flour and starch for the old corrugated container (OCC). Pearl starch was better than cationic starch in strength development, but cationic starch was better for drainage. Application of vacuum on the mixed solution of wood flour and starch helped strength development further without loss of other properties. The effect of wood flour addition on wet web solid content improved as the wet pressing pressure increased. The use of wood flour and starch mixture improved wet web solid contents further.

• 폴리머
• /
• 제38권5호
• /
• pp.620-625
• /
• 2014

Polyvinyl alcohol/polyamide-epichlorohydrin(PVA/PAE) 복합 지력증강제 처리에 따른 종이의 건조 및 습윤인장강도와 표면특성 변화를 살펴보았다. PVA/PAE 복합 지력증강제를 사용하는 경우, PVA와 PAE를 각각 첨가제로 사용하는 것에 비하여 건조 및 습윤 인장강도 증가와 함께 치수안정성이 우수해 짐을 알 수 있었으며 이는 PVA와 PAE의 물리적인 가교에 의한 결과로 해석할 수 있었다. PVA/PAE의 복합화는 PAE 지력증강제 처리에 의하여 발생하는 종이의 표면 거칠기의 증가를 최소화하며 동시에 사이징도 증가시켜 종이 인쇄 시 색농도 증가에 기여함을 알 수 있다.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.755-762
• /
• 1990

The tungsten paste was printed on the surface of 92% alumina sheet which was made by type casting process. The printed tungsten was bonded on the Al2O3 by co-firing in reducing atmosphere. During the co-firing, the binder burn-out was easier in wet H2 atmosphere than in dry H2, which affected sintered density. In practically, the use of wet H2 above 100$0^{\circ}C$ was beneficial for density of alumina and bond strength. This phenomena occured more distinctly when atmosphere varied from dry H2 to wet H2 than varied dew point in wet H2. In wet H2, the improvement in bonding strength can be attributed to good glass migration into the metal layer due to inhibition of the tungsten particle growth, with increase of alumina density, at the temperatrue higher than 100$0^{\circ}C$.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.134-140
• /
• 2015

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.414-420
• /
• 2010

The effect of polymeric diphenyl methane-4,4-diisocyanate (pMDI) or 1,6-hexamethylene diisocyanate (HDI) in the UMF resin was discussed for improvement of the dry and wet shear strengths of plywood manufactured from high moisture content veneers. The curing behavior of UMF resin by pMDI or HDI content was examined by DSC and TGA, and its adhesion performance was evaluated by dry and wet shear strength tests of plywood. With the increase of pMDI content in the UMF resin, the curing temperature, reaction enthalpy (${\Delta}H$), and thermal stability consistently increased. With the increase of HDI content in the UMF resin, however, the curing temperature and reaction enthalpy (${\Delta}H$) decreased consistently and the thermal stability slightly increased in the range of 200 to $400^{\circ}C$ but decreased beyond $400^{\circ}C$. Also, the dry tensile shear strength increased up to the pMDI content of 5% and then decreased with its further addition but the wet tensile shear strength showed slight tendency to increase with the increase of pMDI content in the UMF resin. As the HDI content increased, however, the dry and wet tensile shear strengths of plywood consistently increased.

• 한국식품과학회지
• /
• 제27권5호
• /
• pp.690-696
• /
• 1995

수분함량(12.6, 18.4, 24.4%)이 다른 벼를 각각 도정하여 pin mill로 분쇄한 건식쌀가루와 물에 침지후 roll mill로 분쇄한 습식쌀가루의 특성을 비교하였다. 벼수분 24%에서 건식제조된 쌀가루에서는 지방과 회분함량이 다른 건식쌀가루에 비하여 낮았다. 벼의 수분함량이 많을수록 건식쌀가루는 미세하게 분쇄되었고 전분입자가 떨어져나간 흔적이 쉽게 관찰되었다. 또한 백색도와 수분흡수지수가 높았고, 수분용해도지수는 낮았다. 벼수분이 많을수록 amylogram에서의 setback값은 낮았다. 건식제분된 쌀가루들은 gel consistency와 gel strength에서 차이가 없었으나 습식제분된 쌀가루에서보다 덜 consistent하였고, gel strength는 낮았다. 호화후 $7{\sim}14$일 저장하였을 때 노화gel을 재호화시키는 데 필요한 enthalphy는 벼수분이 많은 건식쌀가루일수록 높았고, 습식쌀가루의 경우는 건식쌀가루보다 낮았다.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.242-251
• /
• 1989

The purpose of this study was to investigate the changes in easy-care and strength properties of the wet fixation processed viscose rayon fabrics. Rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100, 100/150 and 150/100(g/1). Magnasium chloride was used as a catalyst. Treated fabrics were evaluated by nitrogen content, DP rating, wrinkle recovery angle, breaking strength, tearing strength and abrasion resistance. The properties were compared to the fabrics treated by conventional Pad-Dry-Cure (PDC) method. Wet fixation processed fabrics showed DP ratings of higher than 3 and higher than 275 degrees of wrinkle recovery angles in all the mixed resin concentrations. Wet fixation processed fabrics showed increase in breaking strength and tearing strength but decrease in abrasion resistance. However, the decrease in abrasion resistance was much less than the conventional PDC treated fabrics. The one bath wet fixation processed fabrics showed better physical properties than the two bath processed fabrics in general. The optimum treatment condition was the mixed resin concentration of MF/DMDHEU, 100/100 g/l in one bath wet fixation process.

• Composites Research
• /
• 제22권3호
• /
• pp.60-65
• /
• 2009

본 인구에서는 탄소섬유강화 복합재 구조물의 실제 사용조건인 환경에 따른 기계적 특성 연구를 수행하기 위하여, $[0_6]_T$, $[90_{12}]_T$, $[0_{16}]_T$, $[{\pm}45]_{5S}$, $[0/9012/0]_T$, $[0/45/-45/45/-45/0]_{3S}$의 실험을 통해, 복합재의 강도와 강성을 측정 하였다. 실험 결과, 환경조건에서 복합재의 파손 거동을 파악하고 설계관련 데이터베이스를 확보하였다. 저은 건조 조건에서 강도의 증가는 저온($-55^{\circ}C$)에서 섬유 촉은 모재의 취성 증가의 요인으로 분석된다. 고온다습 조건의 진단강도와 전단탄성계수 감소는 침투한 수분에 의해 섬유와 모재의 결합부의 물성이 저하한 것으로 분석된다.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.36-40
• /
• 2007

It has been problematic to repulp the dry broke treated with permanent wet strength agents like PAE, UF and MF. Solution type GPAM has the benefit of easy repulping but it has problems of cocross-linking and tends to gel. Therefore, the product concentration must be lower than 10% to reduce the gel generation problem. We developed emulsion type GPAM by an inverse emulsion technology to resolve both the repulping problem with permanent wet strength agents and the stability problem of GPAM solution products.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3988-3997
• /
• 2010

숏크리트 공법은 공기압으로 콘크리트를 대상 면에 뿜어 붙이는 방법으로, 주로 터널 및 지하구조물의 1차 지보재, 경사면 보호에 사용되며, 최근에는 구조물 유지보수 등에도 적용되고 있다. 특히, 건식방법(Dry-Mix Process)은 습식방법(Wet-Mix Process)에 비해 소형장비가 요구되고 청소 및 유지관리가 용이하고 속경성 재료의 사용이 가능함으로 건식방법이 구조물 보수에 경제적이며 적합하다. 건식 숏크리트의 품질관리는 주로 코아시편을 이용한 압축강도로 규정되어있으나, 이 방법은 코아 시편을 얻는데 많은 어려움을 내포하고 있으며, 특히 속경성 보수재료의 조기강도 평가는 그 어려움을 더 크다. 따라서, 본 연구에서는 속경성 시멘트를 이용하여 초속경 건식 숏크리트의 조기강도를 평가하기 위해 정방형 시험편 압축강도시험, 코아 압축강도시험, 인발시험, 성숙도시험을 실시하여 이들의 상관성을 분석하였다. 코아 압축강도, 정방형 시편 압축강도, 인발시험으로부터 추정된 압축강도 실험결과를 상관성 분석한 결과 모두 90%이상의 높은 상관성이 나타났다.