• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.475-490
• /
• 2010

The analysis of slope stability was performed from seven sites among total eleven sites of waste rock which are divided into two objects (mullock-pile and rock mass) according to the location of dumping-dropping point in L limestone Mine. The analysis of circular failure using Bishop's simplified method and the finite element method for mullock-pile slopes were adopted. For rock mass slopes, identification of failure modes on stereonet projection was determined, thereby limit equilibrium analysis was applied to obtain the safety factor of slopes and the finite element method was used to understand overall behavior of slope. Phi-c reduction method was used to calculate the safety factor of slopes through the finite element method. In mullock-pile slope of zone D and rock slopes of zone F and G, the assurance of slope stability was difficult, and the plans to assure the stability of slopes were proposed on the basis of the analysis of slopes at disposal sites of waste rock. Therefore, the method of piling with waste rock by dozer pushing after dumping for mullock-pile slope of zone D is required, and the method of piling after moving to the place which has no fault zone for rock slope of zone F and G is recommended.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.299-304
• /
• 2007

There are to be some cracks on the material degradation part or the stress concentration parts of the main members, which carry on over-loads, of structures. Because these cracks can be used to evaluate the structural health status, it is important to monitor the crack growth for maintaining the structural safety. In this study, the fiber Bragg grating sensor with a drop ball was developed as a sensor for crack growth detection of an existing crack. The crack growth detection sensor was constructed with three parts: a probe part, a wavelength controling light source and receiver part, and an impact part. The probe part was just formed with a fiber Bragg grating optical fiber The wavelength controling light source part was composed of a current supplying circuit, a DFB laser diode, and a TEC controling circuit for wavelength control. Also, the impact part was just implemented by dropping a steel ball. The performance of this sensor was confirmed by the experiments of the crack detection with an aluminum plate having one existing crack. According to these experiments, the difference of the sensor signal outputs was correlated with the crack length. So, it was confirmed that this sensor could be applied to monitor the crack growth.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.441-449
• /
• 2002

For multimedia traffics to be supported successfully in wireless network environment, it is necessary to provide Qualify-of-Service(QoS) guarantees among mobile hosts(clients). In order to guarantee the QoS, we have to keep the call blocking probability below a target value during hand-off session. However, the QoS negotiated between the client and the network may not be guaranteed due to lack of available channels for traffic of a new cell, since on service mobile clients should be able to continue their sessions. In this paper, we propose an efficient load-balancing algorithm based on the adaptive bandwidth reservation scheme for enlarging available channels in a cell. Proposed algorithm predicts the direction of clients in a cell and adjusts the amount of the channel to be reserved according to the load status of the cell. This method is used to reserve a part of bandwidths of a cell for hand-off calls to its adjacent cells and this reserved bandwidth can be used for hand-off call prior to new connection requests. If the number of free channels is also under a low threshold value, our scheme use a load-balancing algorithm with an adaptive bandwidth reservation. In order to evaluate the performance of our algorithm, we measure metrics such as the blocking probability of new calls and dropping probability of hand-off calls, and compare with those of existing schemes.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.398-401
• /
• 1999

This study was conducted to investigate the changes in qualities of soft persimmon by freezing and defrosting. Testing varieties were Sangjudungsi and Chunsdobansi that were cultivated on Sangju and Chungdo regions, chief cultivation of astringent persimmon in Kyongbuk province. Dropping time to 40 degrees below zero of the flesh was 10∼20 minutes longer in Chungdobansi than that in Sangiudungsi. Freezing temperature of astringent persimmon was 2∼3 degrees below zero. Occurence rates of cracked fruit during freezing storage were 24.5% in Sangjudungsi and 15.5% in Chungdobansi. Defrosting of Sangjudungsi and Chungdobansi took 150 minutes and 120 minutes at 5$^{\circ}C$, respectively. L values of chromaticity were some lower after defrosting than that of frozen soft persimmon, and a and b values decreased during defrosting rapidly. Soluble solid contents of frozen soft persimmon almost didn't change during freezing, that is, harvesting, softening, frosting and defrosting steps. Defrosting completion time to core part took 4 hours and 30 minutes in Sangjudungsi and 4 hours and 20 minutes in Chungdobansi at ordinary temperature (10.9∼14.8$^{\circ}C$).

• Advances in concrete construction
• /
• v.5 no.5
• /
• pp.513-537
• /
• 2017

In this study, the fracture toughness $K_{IC}$ of high performance concrete (HPC) was investigated by conducting three-point bending tests on a total of 240 notched beams of $500mm{\times}100mm{\times}100mm$ subjected to heating temperatures up to $450^{\circ}C$ with exposure times up to 16 hours and various heating and cooling rates. For a heating rate of $3^{\circ}C/min$, $K_{IC}$ for the hot concrete sustained a monotonic decrease trend with the increasing heating temperature and exposure time, from $1.389MN/m^{1.5}$ at room temperature to $0.942MN/m^{1.5}$ at $450^{\circ}C$ for 4-hour exposure time, $0.906MN/m^{1.5}$ for 8-hour exposure time and $0.866MN/m^{1.5}$ for 16-hour exposure time. For the cold concrete, $K_{IC}$ sustained a two-stage decrease trend, dropping slowly with the heating temperature up to $150^{\circ}C$ and then rapidly down to $0.869MN/m^{1.5}$ at $450^{\circ}C$ for 4-hour exposure time, $0.812MN/m^{1.5}$ for 8-hour exposure time and $0.771MN/m^{1.5}$ for 16-hour exposure time. In general, the $K_{IC}$ values for the hot concrete up to $200^{\circ}C$ were larger than those for the cold concrete, and an inverse trend was observed thereafter. The increase in heating rate slightly decreased $K_{IC}$, and at $450^{\circ}C$ $K_{IC}$ decreased from $0.893MN/m^{1.5}$ for $1^{\circ}C/min$ to $0.839MN/m^{1.5}$ for $10^{\circ}C/min$ for the hot concrete and from $0.792MN/m^{1.5}$ for $1^{\circ}C/min$ to $0.743MN/m^{1.5}$ for $10^{\circ}C/min$ for the cold concrete after an exposure time of 16 hours. The increase in cooling rate also slightly decreased $K_{IC}$, and at $450^{\circ}C$ $K_{IC}$ decreased from $0.771MN/m^{1.5}$ for slow cooling to $0.739MN/m^{1.5}$ for fast cooling after an exposure time of 16 hours. The fracture energy-based fracture toughness $K_{IC}$' was also assessed, and similar decrease trends with the heating temperature and exposure time existed for both hot and cold concretes. The relationships of two fracture toughness parameters with the weight loss and the modulus of rapture were also evaluated.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.476-487
• /
• 2021

To prepare acrylic resin coatings containing 70% of solids, we used n-butyl methacrylate(BMA), methyl methacrylate(MMA), 2-hydroxyethyl methacrylate(2-HEMA), and acetoacetoxyethyl acrylate(AAEA), caprolactone acrylate(CLA) as raw materials, the glass transition temperature(T_g) of acrylic copolymer was adjusted around 50 ℃. The viscosity and molecular weight of the acrylic resins was increased with increasing OH values. Di-tert-amyl peroxide was found to be the suitable initiator to get high-solids acrylic resins. The optimum reaction conditions found in the study are 5 wt% of initiator, 4 wt% of chain transfer agent, 4 hrs of dropping time, and 140 ℃ of reaction temperature. The structure of the synthesized resins were characterized by FT-IR and ¹H-NMR spectroscopy. Number average molecular weight of 1900~2600 and molecular wight distribution of 1.4~2.1 were obtained. Crosslinked acrylic urethane clear coatings were obtained by curing reaction between the synthesized acrylic resins and hexamethylene diisocyanate trimer(Desmodur N-3300), the equivalent ratio of NCO/OH was 1.2/1.0. The physical properties from the following studies were carried out: viscosity(Zahn cup #2), adhesion, drying time, pot-life, pensil hardness, and 60° specular gloss. Various properties of the acrylic urethane clear coatings were also evaluated on the coating specimens. Adhesion property to a substrate, drying time, pot-life, pencil hardness, and 60° specular gloss of prepared paint showed quite good properties. Futhermore, prepared paint containing 10% of CLA showed quite good properties for adhesion, low viscosity and high hardness.

• Journal of Korean Medicine Rehabilitation
• /
• v.29 no.3
• /
• pp.113-128
• /
• 2019

Objectives To evaluate the pattern identification tool for knee osteoarthritis and to investigate the relationship between pattern identification tool and knee ROM (range of motion), VAS (visual analog scale) and WOMAC (Western Ontario & McMaster Universities osteoarthritis index). Methods We studied 50 patients who are diagnosed as degenerative osteoarthritis. With one patient dropping out, total of 49 patient went through pattern identification tool. Re-test of the pattern identification tool was implemented after about a week. The reliability was analyzed by calculating ICC (intraclass correlation coefficient). Also, reliability of each pattern identification score was calculated along with influence factor and correlation between knee ROM, VAS and WOMAC. Results Reliability of the pattern identification tool was evaluated as 'poor agreement beyond chance' with ICC value of 0.396. Reliablility of each pattern identification score was calculated and four out of five were measured 'good' with one 'moderate' reliability. Two of inter-item consistency were 'good', two were 'acceptable' and one was 'questionable'. Correlation between each pattern identification and knee ROM showed 'clear negative linear relationship' with two patterns. VAS showed 'clear positivie linear relationship' with all five patterns. WOMAC showed 'positivie linear relationship' with all five patterns. Conclusions According to the results, pattern identification tool for knee osteoarthritis seems to have meaningful relationship with other agnedas. Also, further research is needed to develop the tool.

• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.3
• /
• pp.29-48
• /
• 2019

This study reviews the basics of earthquake preparedness from several archives and international cases of earthquake damage and restoration to establish an earthquake preparedness plan in Korean archives. The results of the study are as follows: first, to establish the direction of an earthquake preparedness plan, the study summarizes the basic characteristics of an earthquake and its damages, as well as applies the key elements of disaster preparedness planning after reviewing its basic principles. Second, the study analyzes four international cases that may have significant implications for the earthquake preparedness plan in Korea. Given this, four international cases present lessons and limitations such as the book dropping of a library in Japan, the collapse of archives in Germany, damaged archives because of a massive earthquake in New Zealand, and earthquake preparedness and recovery plans in cultural heritage sectors. Third, to apply the information from overseas cases to domestic, the study examines the lessons, the key elements of earthquake preparedness planning, and the public record standard for Korean archives through the mutual linking process, as well as issues that should be considered. The issues reviewed in this study could help Korean archives establish a realizable earthquake preparedness plan in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.8-15
• /
• 2019

In this study, we synthesized a calcium sulfonate complex grease and a lithium complex grease to investigate their physical, rheological and tribological properties. The thermal stability of the calcium sulfonate was higher than $300^{\circ}C$ and the lithium complex grease was $245^{\circ}C$ in the dropping point test. In the grease viscosity measurement, the calcium sulfonate complex grease was measured as $7.0Pa{\cdot}s$ and the lithium complex grease was as $4.5Pa{\cdot}s$. Therefore, it was confirmed that the calcium sulfonate complex grease is superior to the lithium complex grease in terms of thermal stability and cohesiveness. In the 4-ball wear test, the calcium sulfonate complex grease was measured to be 0.43 mm and the lithium complex grease to 0.85 mm. In the 4-ball extreme pressure test, calcium sulfonate complex grease was measured as 620 kgf and the lithium complex grease was as 125 kgf. Therefore, it was confirmed that the calcium sulfonate complex grease is superior to the lithium complex grease in abrasion resistance and load-bearing property. It was found that the calcium sulfonate complex grease is more effective than the lithium complex grease in the lubrication at high temperature and high load.

• Journal of Industrial Convergence
• /
• v.19 no.1
• /
• pp.117-127
• /
• 2021

The purpose of this study was to identify the relationship between social support, academic self-efficacy, and learning agility on intention of academic dropout among nursing students. Data collection was conducted online surveys from November 9 to 27, 2020. The 363 students were conveniently sampled from the school of nursing in K-do in Korea. The contents of the self-reported questionnaire included social support, academic self-efficacy, learning agility, intention of academic dropout. As a result, The score of each variables were like this: social support 4.32, academic self-efficacy 3.66, learning agility 3.40, intention of academic dropout 2.08. The factors that affecting intention of academic dropout among nursing students are academic self-efficacy, learning agility, satisfaction on major, perceived mental health status, grade in score and grade, which explained 30.4% of the variances. Therefore in order to lower the intention of dropping out of nursing students, it is considered that the development of programs considering individual characteristics and systematic support are necessary.