• Journal of Advanced Research in Ocean Engineering
• /
• 제1권4호
• /
• pp.198-210
• /
• 2015

This paper presents the damage assessment of a free-fall dropped object on the seabed. The damage to a dropped object totally depends on the relationship between the impact energy and the soil strength at the mudline. In this study, unexpected dropping scenarios were first assumed by varying the relevant range of the impact velocity, structure geometry at the moment of impact, and soil strength profile along the penetration depth. Theoretical damage assessments were then undertaken for a free-fall dropping event with a fixed final embedment depth for the structure. This paper also describes the results of a three-dimensional large deformation finite element analysis undertaken for the purpose of validation. The analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying the simple elastic-perfectly plastic Tresca soil model. The validation exercises for each dropping scenario showed good agreement, and the present numerical approach was capable of predicting the behavior of a free-fall dropped object.

• Tribology and Lubricants
• /
• 제22권5호
• /
• pp.269-275
• /
• 2006

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required to improve bearing lubrication. Three urea/ether oil greases with different composition were synthesized to compare the performance of these greases. The typical grease physical properties were investigated, and life test of these greases was conducted by FE-9 grease life tester. The grease with higher content of the thickener showed higher performance. After these preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT value. And optimized conditions for grease synthesis were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT value respectively. The optimized grease using OIT value showed longer grease life than that using dropping point. Two greases were synthesized following the optimum synthesis conditions by means of OIT value. Then grease life and other properties of these greases were investigated. These two greasaes showed longer grease life than typical urea/ether oil grease.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• 대한전자공학회논문지TC
• /
• 제38권11호
• /
• pp.1-8
• /
• 2001

본 논문에서 제안한 적응적 엄격 패킷 폐기 메커니즘은 사이클 사이의 트래픽 변화를 예측하여 혼잡제어를 위한 패킷 폐기를 적응적으로 처리할 수 있다. 따라서 제안된 메커니즘은 RIO 메커니즘의 단순 폐기율적용에 대한 단점을 보완하고, 동적 엄격 패킷 폐기 메커니즘(DSPD)의 예측 가능한 대역폭의 낭비를 최소화하였다. 시뮬레이션을 수행하여 망 트래픽의 상태에 따라 동적으로 변하는 전송가능 폐기순위에 따른 처리율과 패킷 폐기율을 RIO, DSPD 메커니즘과 비교 분석하였다. 시뮬레이션을 분석한 결과 제안된 메커니즘은 트래픽의 양에 상관없이 각 AF 클래스의 폐기순위를 엄격하게 적용하고 폐기순위에 따른 패킷 전송 능력을 RIO, DSPD에 비하여 개선하였음을 증명하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• 화약ㆍ발파
• /
• 제33권2호
• /
• pp.25-39
• /
• 2015

수중 암반 제거 방법은 화약을 사용한 수중발파와 크레인에 장착된 쇄암봉 낙하 충격을 이용하는 방법 등이 널리 이용된다. 이와 같은 암반 제거 방법은 환경적인 요인에서 지반 진동과 수중 소음을 유발하게 된다. 본 연구 대상 현장은 하역 부두의 접안능력을 향상시키기 위해 기 설치된 잔교식 돌핀 구조물에 근접한 지역의 수중 기반암을 쇄암봉 낙하에 의해 제거하도록 설계되어 있다. 시험시공을 통하여 쇄암봉 낙하 충격으로 유발되는 진동에 대한 계측, 평가를 거쳐 진동 추정식을 획득하였고, 이를 본 공사에 반영하여 구조물에 대한 안전성을 확보하였다.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.11-17
• /
• 2009

Polarography is a subclass of voltammetry where the working electrode is a dropping mercury electrode. More, I developed the experiment for raising up mercury electrode. In Voltammetry, information about an analyte is obtained by measuring the current as the potential is varied at oxidation-reduction reaction. A plot of current vs. potential in a polarography experiment shows the current oscillations correspoding to the drops of Hg falling from the capillary. The drops growth causes capacitive and faradic current. These changing current effects combined with experiments where the potential is continuously changed can result in noisy traces. The raising up type improved upon the method of dropping in hardware. In reduction of the noise, moving average smoothing method have been used. But the other procedure is introduced based on Fourier transformation. So FFT and IFFT engine was implemented and installed in my experiment. However, after experimentation, peak height as the measuring parameter gave a good linear relationship to concentration. The resolution of potential peaks of various kinds, using Zn and Cu as the example, was improved using the smoothing method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.329-329
• /
• 2013

본 연구에서는 PEDOT:PSS와 crystalline-ITO (c-ITO) 박막 계면에서의 화학적 반응을(박리 및 용해 특성)을 관찰하기위해 spin-coating 및 droplet dropping을 통하여 PEDOT:PSS 용액을 코팅하고 이후 화학적 거동에 따른 전기적, 광학적 및 구조적 특성 변화를 관찰하였다. 강산성을 띄는 PEDOT:PSS (Al 4083) 박막의 코팅 전, 0.4T sodalime glass 위에 열처리를 통하여 성막된 c-ITO 투명전극을 15분 동안 상압 오존 공정을 통하여 계면처리함으로써 다른 변수의 영향을 배제하였으며, 표면 처리 후 spin-coating 및 droplet dropping method를 통하여 PEDOT:PSS를 코팅하여 c-ITO와 PEDOT:PSS 계면사이의 화학적 반응의 영향을 시간 경과에 따라 분석하였다. PEDOT:PSS 코팅 후 솔밴트 제거를 위해 hot plate를 이용하여 $110^{\circ}C$로 열처리되었다. Spin-coating 방법과는 달리 droplet dropping 방법을 통해 형성된 c-ITO 투명전극/PEDOT:PSS 계면에서는 spin coating에서 적용된 동일한 공정변수적용에도 불구하고 PEDOT:PSS의 산성으로 인한 ITO 투명전극 표면에서의 화학적 조성변화가(In, Sn, O의 조성의 변화) 발생됨을 x-ray photoelectron spectroscopy 결과를 통해 확인하였다. 뿐만 아니라 계면 조성반응 변화에 따른 전기적 특성 및 광학적 투과율의 열화가 발생됨을 Hall measurement 측정과 UV/Vis spectrometer 결과를 통하여 도출하였다. 본 결과를 통해 c-ITO/PEDOT:PSS 사이에서 발생되는 내산특성/계면 화학변화가 유기태양전지에서의 산화물 투명전극과 유기물 계면 열화현상에 영향을 받을 수 있음을 나타낸다.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1282-1289
• /
• 2000

본 논문에서는 무선 통신망에서 요구되는 핸드오프 호의 차단 확률을 보장하면서 신규 호의 블록킹 확률을 줄이기 위해 트래픽의 변동 특성과 핸드오프 호 비율을 이용한 가변 가드 채널방식을 제안하였다. 제안한 방식에서 핸드오프 발생 비율이 신규 호 발생 비율보다 낮은 경우 채널의 비효율적 사용의 문제점을 개선하기 위하여 정해진 핸드오프 호의 QoS(Quality of Service)를 보장할 수 있는 가드 채널 수를 재 설정한 후 나머지 채널을 신규호에 할당하여 신규 호의 블록킹 확률을 낮출 수 있도록 하였다. 제안한 방식의 성능을 평가하기 위하여 수학적 분석을 하였고 핸드오프 호 차단 확률, 신규 호 블록킹 확률 및 채널 이용률 관점에서 기존의 가드 채널 방식과 비교하였다.

• Journal of Information Processing Systems
• /
• 제7권4호
• /
• pp.679-690
• /
• 2011

In this paper we consider a local area network (LAN) of dual mode service where one is a token bus and the other is a carrier sense multiple access with a collision detection (CSMA/CD) bus. The objective of the paper is to find the overall cell/packet dropping probability of a dual mode LAN for finite length queue M/G/1(m) traffic. Here, the offered traffic of the LAN is taken to be the equivalent carried traffic of a one-millisecond delay. The concept of a tabular solution for two-dimensional Poisson's traffic of circuit switching is adapted here to find the cell dropping probability of the dual mode packet service. Although the work is done for the traffic of similar bandwidth, it can be extended for the case of a dissimilar bandwidth of a circuit switched network.