• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.167-171
• /
• 2012

Ag- and Pd-loaded $SnO_2$ nanowire network sensors were prepared by the growth of $SnO_2$ nanowires via thermal evaporation, the coating of slurry containing $SnO_2$ nanowires, and dropping of a droplet containing Ag or Pd nanoparticles, and subsequent heat treatment. All the pristine, Pd-loaded and Ag-loaded $SnO_2$ nanowire networks showed the selective detection of $C_2H_5OH$ with low cross-responses to CO, $H_2$, $C_3H_8$, and $NH_3$. However, the relative gas responses and gas selectivity depended closely on the catalyst loading. The loading of Pd enhanced the responses($R_a/R_g$: $R_a$: resistance in air, $R_g$: resistance in gas) to CO and $H_2$ significantly, while it slightly deteriorated the response to $C_2H_5OH$. In contrast, a 3.1-fold enhancement was observed in the response to 100 ppm $C_2H_5OH$ by loading of Ag onto $SnO_2$ nanowire networks. The role of Ag catalysts in the highly sensitive and selective detection of $C_2H_5OH$ is discussed.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.3
• /
• pp.95-102
• /
• 2013

It is indispensable to modern society metal processing since the industrialized rapidly, but it is a metalworking cutting fluid immediately. In addition, this means selecting a emulsion on the basis of quality criteria processing method, the material of the material, cutting depth, cutting speed, Djourou fence Liang, and surface roughness, cutting oil, the shape of the device based on the emulsion, I will be the structure of the tank, filtration equipment also changes. In particular, acting bacteria is now breeding in response to the passage of time due to metal ion degradation due to heat generated hydraulic fluid leakage, humidity tung, during processing, seep from processing material at the time of processing the water-soluble cutting oil for generating the malodor by dropping significantly the performance of the cutting oil to corruption from, sometimes by introducing various additives to suppress spoilage in advance. In this study, we expect the effect of the cost reduction in the extension of fluid replacement cycle through the application of the management apparatus and deep understanding in the management of cutting fluid, the working environment through the understanding and interest of workers in the production site more than anything I try to become useful for the improvement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1571-1589
• /
• 2016

Nodes in MANETs are battery powered which makes energy an invaluable resource. In OLSR, MPRs are special nodes that are selected by other nodes to relay their data/control traffic which may lead to high energy consumption of MPR nodes. Therefore, employing energy efficient MPR selection mechanism is imperative to ensure prolonged network lifetime. However, misbehaving MPR nodes tend to preserve their energy by dropping packets of other nodes instead of forwarding them. This leads to huge energy loss and performance degradation of existing energy efficient MPR selection schemes. This paper proposes an energy efficient secure MPR selection (ES-MPR) technique that takes into account both energy and security metrics for MPR selection. It introduces the concept of 'Composite Eligibility Index' (CEI) to examine the eligibility of a node for being selected as an MPR. CEI is used in conjunction with willingness to provide distinct selection parameters for Flooding and Routing MPRs. Simulation studies reveal the efficiency of ES-MPR in selection of energy efficient secure and stable MPRs, in turn, prolonging the network operational lifetime.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.193-201
• /
• 2014

In cognitive radio networks, the packet transmissions of the secondary users (SUs) can be interrupted randomly by the primary users (PUs). That is to say, the PU packets have preemptive priority over the SU packets. In order to enhance the quality of service (QoS) for the SUs, we propose a spectrum access strategy with an ${\alpha}$-Retry policy. A buffer is deployed for the SU packets. An interrupted SU packet will return to the buffer with probability ${\alpha}$ for later retrial, or leave the system with probability (1-${\alpha}$). For mathematical analysis, we build a preemptive priority queue and model the spectrum access strategy with an ${\alpha}$-Retry policy as a two-dimensional discrete-time Markov chain (DTMC).We give the transition probability matrix of the Markov chain and obtain the steady-state distribution. Accordingly, we derive the formulas for the blocked rate, the forced dropping rate, the throughput and the average delay of the SU packets. With numerical results, we show the influence of the retrial probability for the strategy proposed in this paper on different performance measures. Finally, based on the trade-off between different performance measures, we construct a cost function and optimize the retrial probabilities with respect to different system parameters by employing an iterative algorithm.

• Journal of the Korean Ceramic Society
• /
• v.45 no.6
• /
• pp.345-349
• /
• 2008

$TiO_2$ coating ceramic tile for self-cleaning purpose was prepared by the precipitant dropping method using $TiCl_4$ as a precursor. $TiO_2$ film was formed on the ceramic tile by spray-coating technique and heat-treated at $500^{\circ}C$ for 1 h. The size and crystalline structure of $TiO_2$ particles were 15.3 nm and anatase phase. The outdoor exposure tests were conducted and the effects of outdoor exposure test conditions, such as exhaust concentration of contamination materials (test places), the UV light intensity (irradiation direction) and coating amounts of $TiO_2$ on the self-cleaning properties were investigated by the brightness measurements. As a results, self-cleaning property of $TiO_2$ coating tile was affected by the coating amount of $TiO_2$ however, not affected by the UV light intensity included in sun's ray (irradiation direction). $TiO_2$ coating ceramic tile can be utilized for exterior finishing materials because of self-cleaning property of $TiO_2$ coating tile.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.725-733
• /
• 2008

In this study the preparation method of the spherical ADU droplets, intermediate compound of a HTGR nuclear fuel, was detailed-reviewed and then, the characteristics on an ageing and a washing steps among the wet process and the thermal treatment process on the died-ADU${\rightarrow}UO_3$ conversion with the high temperature furnaces were studied. The key parameters for spherical droplets forming are a precise control of feed rate and a suitable viscosity value selection of a broth solution. Also, a harmony of vibrating frequency and amplitude of a vibration dropping system are important factor. In our case, an uranium concentration is $0.5{\sim}0.7mol/l$, viscosity is $50{\sim}80$ centi-Poise, vibration frequency is about 100Hz. In thermal treatment for no crack spherical $UO_3$ particle, the heating rate in the calcination must be operated below $2^{\circ}C$/min, in air atmosphere.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.187-196
• /
• 2017

Purpose: The purpose of this study was to investigate the factors contributing to temporomandibular joint disorder symptoms. Methods: The survey was conducted from May 1 to June 10 2017 against college students(120 males and 123 females) in Daejeon and Gangwon who understood the purpose of this study and agreed to participate. Results: First, The most frequent symptom of temporomandibular joint disorders is noises from the joint (male 45%, female 61.8%), followed by headache or neck pain (male 25.8%, female 52.8%). There was shown a significant difference by gender in all items except for jaw dropping, poor alignment of teeth and trauma(p<0.05). Second, Looking into the correlation between stress and subjective symptoms of Temporomandibular joint disorders, The stress of Temporomandibular joint disorders showed more significant relation with realistic issues such as academic task, economic burden (e.g., treatment cost), future career, and life values rather than aspect of social relationship(p<0.01). Conclusion: As a result of analyzing variables to understand the influence of stress on temporomandibular joint disorders, the accumulated number of bad habits, stress and temporomandibular joint disorders showed a significantly positive correlation with one another (p<0.05). In other words, the higher the stress level the severe the temporomandibular joint disorders; the more the bad habits the severe the temporomandibular joint disorders;

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1420-1423
• /
• 1997

To make clearly breakdown rl1cchanism and path at interface of crystal and amorphous region, we fabricated HDPE and LDPE thin film by dropping solution onto glass substrate. then annealed the film at $140^{\circ}C$. Shperulites formation and its interface prepared from of two different materials differ from each other. Comparing breakdown site and breakdown field of HDPE with those of LDPE, we can demonstrate the reason that breakdown holes in HDPE are concentrated on the region of interface. From the result, It is appeared that interface of crystallites lead not to weakness as electrical insulating materials.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2007

Active queue management (AQM) refers to a family of packet dropping mechanisms for router queues that has been proposed to support end-to-end congestion control mechanisms in the Internet. The proposed AQM algorithm by the IETF is Random Early Detection (RED). The RED algorithm allows network operators simultaneously to achieve high throughput and low average delay. However. the resulting average queue length is quite sensitive to the level of congestion. In this paper, we propose the Refined Adaptive RED(RARED), as a solution for reducing the sensitivity to parameters that affect RED performance. Based on simulations, we observe that the RARED scheme improves overall performance of the network. In particular, the RARED scheme reduces packet drop rate and improves goodput.

• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.93-101
• /
• 2001

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods, guides cooling water, and protects the system from an external impact load, such as earthquakes. Therefore, the mechanical and structural properties of the spacer grids must be extensively examined while designing them. In this paper, a numerical method for predicting the buckling strength of spacer grids is presented. Numerical analyses on the buckling behavior of the spacer grids are performed for a various array of sizes of the grids considering that the spacer grid is an assembled structure with thin-walled plates and imposing proper boundary conditions by nonlinear dynamic finite element method using ABAQUS/Explicit. Buckling tests on several numbers of specimens of the spacer grid were also carried out in order to compare the results between the test and the simulation result. The drop test is accomplished by dropping a carriage on the specimen at a pre-determined position. From this test, the specimens are buckled only at the uppermost and the lowermost layer among the multi-cells, which is similar to the local buckling at the weakest point of the grid structure. The simulated results also similarly predicted the local buckling phenomena and were found to give good correspondence with the experimental values for the thin-walled grid structures.