• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10b
• /
• pp.62-66
• /
• 2000

비닐하우스내 연질피복자재의 표면에 온도차이와 다습한 조건으로 물방울이 부착되어 광투과율이 떨어지고, 물방울끼리 결합된 커다란 물방울은 작물체에 직접 떨어져서 물리적인 손상과 냉해 및 병해를 유발하게된다. 이러한 문제점을 해결하게 위하여 폴리머로 구성된 플라스틱 피복자재의 표면에 계면활성제을 첨가하여 방적성을 높이는 제품이 보급되고 있으나, 연질필름 종류별 방적성에 대한 기준 제시가 미흡하여 농가의 구입혼란을 초래하고 있는 바, 간편하고 용이한 방적성 검정기술이 필요하여 수적직경을 측정함으로서 방적성에 대한 간이측정기술을 개발하였다. (중략)

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.10-16
• /
• 1994

This study aimed at measuring the latent heat of phase transformation of S45C carbon steel in quenching and at conducting the analytical researches into the calculation of cooling curves including the latent heat. The temperature of phase transformation of steel and its latent heat are dependant upon the cooling rates at the temperature of A1 phase transformation point. The effect of the latent heat of phase transformation is especially manifest at the cooling curve of center of specimens. The higher the cooling rates became, the lower fell the temperature region of phase transformation. In the figures of cooling rates, the phenomena of cooling rate dropping into zero was caused by the latent heat of phase transformation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1414-1417
• /
• 2003

In chemical forming process, mixed materials of LDPE, EVA and forming agent are used. However mechanical properties has been dropping remarkably through this forming process. In this study, Above materials(LDPE, EVA) were used in microcellular foaming injection process. And various effective factors in this process were selected by Axiomatic approach and systematically estimated by DOE(Design of Experiments). As a results, injection type and rate of mixing resins have more influence on forming rate than other factors.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.21-27
• /
• 2002

In this paper, a simple test rig of high-speed crash for the front members of vehicles was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the traction wire and by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. In order to measure the energy absorbed by the specimen when it collapse to the wall and during it deform, the two strain gage type load cells are used at the wall place. The test rig rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.384-388
• /
• 1977

Clay-polymer thickened greases were made by dispersing bentone-polyethylene and bentone-atactic polypropylene into mineral oil at an adequate temperature, and the physical properties such as wear and water washout characteristics, oxidation and shear stabilities, and dropping point of the greases were tested. Even if the greases failed to meet some properties, it was found that those greases can be used for some special purposes, by observing and comparing the properties with those of clay-metallic soap thickened greases that were made in this experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1355-1360
• /
• 1990

This paper describes the application of the recently developed feedback linearization technique to the design of a new command to line-of-sight (CLOS) guidance law for skid-to-turn (STT) missiles. The key idea lies in converting the three dimensional CLOS guidance problem to the tracking problem of a time-varying nonlinear system. Then, using a feeedback linearizing approach to tracking in nonlinear systems, we design a three dimensional CLOS guidance law that can ensure zero miss distance for a randomly maneuvering target. Our result may shed new light on the role of the feedforward acceleration terms used in the earlier CLOS guidance laws. Furthermore, we show that the new CLOS guidance law can be computationally simplified without performance degradation. This is made possible by dropping out the terms in the new CLOS guidance law, which obey the well-known matching condition.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2557-2560
• /
• 2010

To assay for antioxidant capacity of natural products considered important in producing human health benefits, a practical and economical method using pellet techniques was developed. A standard visualizing reagent, 1,1diphenyl-2-picryl-hydrazyl (DPPH), was mixed with a water-miscible polyvinyl alcohol (PVA), serving as a solid phase support for the DPPH reagent. A DPPH pellet was prepared by dropping a small volume of the DPPH solution onto PET film, and drying in an oven. The PVA-based DPPH pellet was dissolved into water, in which the water-miscible PVA plays as a non-ionic surfactant to help the DPPH reagent to be dissolved into the solvent. Using the DPPH assay, the antioxidant capacity of water-soluble extracts of black soybean, barley, green tea, and green gram was examined. Among the natural products tested, green tea showed the highest antioxidant capacity. This PVA-based DPPH antioxidant assay can be further applied in the natural food, raw plant material, and health product inspection field.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.283-288
• /
• 1996

Direct safety injection into the reactor vessel downcomer annulus(DVI) is a fundamental feature of the KNGR(Korean Next Generation Reactor) four-train safety injection system. The numerical analysis of thermal mixing of ECC(Emergency Core Cooling) water through DVI with the water in the RVDC(Reactor Vessel Downcomer) annulus has been performed, in order to study the impact of nozzle location on the pressurized thermal shock and safety analysis. The results of this study show that the thermal mixing due to the natural circulation induced by the limiting accident conditions is sufficient to prevent temperature in the RVDC from dropping to the level of concern for PTS. When the DVI nozzle is located right above the cold leg, the temperature distribution at the outlet of flow field is most uniform. The tool used for numerical analysis is CFDS-FLOW3D.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.401-404
• /
• 2003

In most resource reservation strategies, which give higher priorities to handoff calls over new calls, new calls are often blocked even though there is plenty of available reserved resource. This causes inefficient resource utilization, especially when there are not so many handoff attempts. In this paper, we propose a new reservationstrategy called soft reservation in which new calls can be allocated to the reserved resource while maintaining the QoS of handoff acceptable. Using an M/M/c/c queuing model, we can see that the proposed strategy provides better performance than the conventional reservation strategy in terms of blocking probability of new call and dropping probability of handoff calls.

• Journal of the Korean Society of Food Culture
• /
• v.13 no.1
• /
• pp.27-35
• /
• 1998

Consumption of edible oil at food service institutions in Inchon was surveyed to provide basic data for continuous education of dietitians. Manufacturing industry was the major food service institution(78.8%) in Inchon followed by schools, hospitals and social welfare service centers. Most dietitians were at the age of twenties and college graduates with professional careers of 1-5 years. Oil was purchased on the basis of its quality within 1-3% of total food costs four times a month. Proper frying temperature was determined by dropping salt or food coating materials into the oil. Soybean oil was the most frequently used and commercial frying mix powder and flour and eggs in water were the most common food coating materials. Fish and commercial frozen foods were the most frequently used materials for frying. Fried foods were stored with covers in a basket and consumed within 30 minutes after cooking. Frying oils were used one more time after filtering and color was the index for determination of re-use.