• Journal of Radiation Protection and Research
• /
• 제11권1호
• /
• pp.65-69
• /
• 1986

Picker C-9 $^{60}Co$원격치료장치에 의한 선량분포의 비대칭을 물팬톰에 의한 측정으로부터 발견하고 비대칭적인 선량분포의 원인이 선원의 비정상적인 'ON' 위치였음을 확인하였다. 선원이 비정상적인 위치에서 정지하게 된 원인이 선원을 'OFF'위치로 되돌리는 태엽의 일부 인접면이 접촉하게되어 마찰의 발생과 증대였음을 확인하였다. 태엽에 윤활유를 쳤을 때 선량분포의 대칭성이 다소 호전되었지만 근본적인 해결책은 태엽을 교체하는 것이다. 예방대책으로는 주기적인 선량분포의 측정에 의한 확인과 보수유지계획에 의한 관리가 수행되어야 할 것이다.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.11-20
• /
• 2001

Experiments under the stationary and harvesting condition, were performed in order to investigate the vibration characteristics of a head-feeding combine. 6 degrees of freedom components of acceleration at the location of the center of the gravity, and 3 degrees of freedom components of acceleration at the location of the operator seat were measured independently. The vibration characteristics of the combine were estimated with the power spectral density of the time series data of accelerations. From this research, the following results were obtained. 1. Vibration of a head-feeding combine under the stationary condition(engine, thresher and cutter are driven without harvesting) is mainly influenced by the engine. Further, 1/3, 1/2 (sub-harmonic) frequency components of the engine are observed besides engine driving frequency component(45Hz). 2. Vibration of a head-feeding combine under the harvesting condition is influenced by the engine, threshing unit and driving unit. Namely, some kinds of vibration frequency components in harvesting are observed compared with stationary condition. Further, sub-harmonic frequency components of the engine are observed besides engine driving frequency component as same as stationary condition. From these results, it may be concluded that vibration of a head-feeding combine is characteristics of semi-periodic and nonlinear vibration.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.66-69
• /
• 2010

최근 차량에는 차량과 IT와 결합을 차량의 안전성, 편리성을 위해 많은 전자제어장치(ECU)가 장착되어 있고 있다. 이러한 전자제어장치는 각 전자제어장치에 대한 Data는 OBDII 네트워크에 전송을 하고 멀티미디어에 대한 Data 는 MOST 네트워크에 전송을 한다. 본 논문에서는 기존의 블랙박스의 문제점을 보완하기 위해 차량용 네트워크의 새로운 멀티미디어 네트워크인 MOST 차량용 네트워크와 현재 차량에서 표준적으로 쓰이는 OBDII 차량용 네트워크를 이용하여 전자제어장치의 데이터를 이용한 Data들을 취합하여 차량의 현재 상황을 판단하고 정보를 제공함으로써 차량의 안전성 및 블랙박스로써의 역할을 극대화 시킬 수 있는 차량용 블랙박스 시스템을 구현하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.7-11
• /
• 2008

This paper describes design procedure and control strategy of HDC(High side DC/DC Converter) and MCU(Motor Control Unit) for diesel hybrid electric vehicle. In designing HDC and MCU for HEV high power density and reliability is strongly needed to meet the demand of automotive industry. In order to achieve the high performance of a controller, MPC5554 based control board is developed. An optimized film capacitor and inductor are also developed for high efficiency driving. Skim 63 IGBT module of SEMIKRON for automotive is used for power switching device. The most efficient cooling model for optimal size and reliability were verified by simulation. These procedures are verified by bench or driving test and the results are present in this paper.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.971-972
• /
• 2006

We have demonstrated Carbon Nanotube Back Light Unit (CNT-BLU) which has a triode structure. Local dimming scheme was introduced to the BLU driving system. With this driving method, contrast ratio enhanced 20 times higher than that of conventional Cold Cathode Fluorescent Lamp (CCFL) BLU.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.15-22
• /
• 2014

With a conventional positioning apparatus, it is very difficult simultaneously to achieve desired driving ranges and precision levels at the sub-micrometer level. Generally, a lead screw and friction drive have been used as servo control systems. These have large driving ranges, and high-speed positioning is feasible. In this study, we present a global servo system controlled by a laser interferometer acting as a displacement measurement sensor for achieving positioning accuracy at the sub-micrometer level.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.43-47
• /
• 2012

A linear compressor generates pulsating pressure and oscillating flow in a cryocooler such as Stirling cryocooler and pulse tube refrigerator. It is driven by AC power source and designed to operate at resonance of piston motion. The driving voltage level is determined by electric parameters of resistance, inductance and thrust constant of linear motor. From voltage equation on linear motor, the power factor of driving power is inherently less than 1. The phase difference between voltage and current of supplied power can be zero using capacitor and this can minimize a supply voltage level. Especially, the linear compressor of kW class requires high voltage and thus can cause a difficulty in selecting power supply unit due to limitation of voltage level. The capacitor in driving electric circuit is useful to settle this problem. In this study, the electric circuit of linear compressor is analytically investigated with assumption of mechanical resonance. The electric parameters of commercial linear motor are used in the analysis. The effects of capacitor on driving voltage level and power factor are investigated. From analytic results, it is shown that the voltage level can be mimized with using capacitor in driving electric circuit.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.612-615
• /
• 2013

허브(hub) BLDC(Brushless Direct Current) 전동기란 아우터로터 타입 고효율 전동기로 다극의 영구자석으로 이루어진 회전자가 바퀴의 구동축이 되는 직접구동용 모터를 말하며, 휠인모터라고도 불린다. 본 연구에서는 허브모터를 구동축으로 갖는 2륜 또는 3륜 구동체를 구동하기 위한 BLDC 허브모터 속도 제어기를 PIC 마이크로 컨트롤러를 이용하여 설계한다. 구동기는 6 개의 독립된 MOSFET 스위칭소자를 사용하여 구성하며, 게이트 구동회로는 직접 설계하여 경제성을 높인다.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.376-382
• /
• 2008

본 논문에서는 LCD(liquid crystal display)에서의 모션 블러 현상을 저감 시킬 수 있는 scanning backlight unit을 면광원을 사용하여 설계 및 제작 하였다. 면광원은 그 구조의 단순함과 BLU(backlight unit) 조립성과 구동의 간편성으로 인해 차세대 BLU의 신규 광원으로 각광 받고 있다. 램프 휘도를 제어하기 위하여 스캔 구동 시 램프의 on-time을 조절하였으며 실험결과 램프 휘도가 선형적으로 변화되고 넓은 범위의 휘도 제어가 가능함을 확인하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.17-19
• /
• 1987

In this paper an ultrasonic loud speaker (ie,. parametric speaker) driving technic was proposed. The study was focused on reduction of distortion in self-demodulated sound using a sound source deriven by MDSB(Modified Double Side Band) signal. And, the esperiment was performed in acoustic wave guide usin the developed MDSB unit according to the variation of distance from the source. In the result, prposed MDSB method was found to decrease second harnonic distortion in -3 to -6 dB compared to conventional DSB method.