• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.

• Journal of Information Display
• /
• 제9권1호
• /
• pp.1-5
• /
• 2008

Two new impulsive driving technologies for 120Hz liquid crystal display (LCD) panels are proposed to improve moving picture quality. One technology generates the dark frame using an adder and a shifter simply without using any look up tables (LUTs). It results in a cost effective impulsive scheme with motion picture quality comparable to that of high speed driving. The other is a backlight flashing method designed to avoid ghost images. The issue of ghost images caused by the slow response time of liquid crystal (LC) is solved by means of 120Hz overdriving and 120Hz backlight flashing. Using the perceived blur edge time (PBET) metric, measured moving picture response time (MPRT) values were 10.8ms and 4.4ms, respectively, while that of 120Hz high speed driving was 10.1ms.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.33-39
• /
• 2014

자동 주행 차량을 구현하기 위해서는 장애물 인식, 차선 인식 및 변경 등 많은 기능들이 필요하다. 본 논문에서는 자동차 주행에 필요한 '차선 인식'의 범위를 확장시킨 '색깔 인식' 개념을 도입 적용시키기 위해 3가지 코스를 주행하는 시스템을 구현하였다. RC car의 크기와 비례하게 축소 제작한 각 코스에서 주행에 필요한 검지선의 위치, 기울기 및 차량의 속도를 고려하여 조향 제어를 하였고, 브레이크 기능이 없는 RC car를 제어하기 위해 차량의 속도와 검지선의 위치를 고려하였다.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.1-6
• /
• 2018

Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.20-25
• /
• 2022

This paper represents an adaptive Region of Interest (ROI) decision for real-time performance in an autonomous driving perception module. Since the whole automated driving system consists of numerous modules and subdivisions of module occur, it is necessary to consider the characteristics, complexity, and limitations of each module. Furthermore, Light Detection And Ranging (Lidar) sensors require a considerable amount of time. In view of these limitations, division of submodule is inevitable to represent high real-time performance for stable system. This paper proposes ROI to reduce the number of data respect to computation time. ROI is set by a road's design speed and the corresponding ROI is applied differently to each vehicle considering its speed. The simulation model is constructed by ROS, and overall data analysis is conducted by Matlab. The algorithm is validated using real-time driving data in urban environment, and the result shows that ROI provides low computational costs.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.43-49
• /
• 2022

FMCW레이다는 일반 차량의 충돌방지용도 뿐만 아니라 자율주행시스템에서 활발히 센서로서 사용이 되고 있다. 본 논문에서는 자율주행센서로서 개발한 2-chip 기반의 FMCW MIMO(Multi Input Multi Output) 레이다 설계 및 구현에 대해서 설명하였다. 사용 칩을 이용하여 48채널의 가상배열을 이용하여 방위각 해상도가 우수하게 설계하였으며, 특히 Frame 기반과 Chirp 기반의 파형발생 및 신호처리를 혼합하여 최대탐지 가능 속도와 속도 보상에 대해 강점을 보유할 수 있도록 제작하였으며, 구현된 시스템은 실험실 내 시험과 실제 주행시험을 통하여 성능 및 상용화 가능성에 대한 분석을 진행하였다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.366-373
• /
• 2020

The autonomous vehicles (AVs) could make a positive or negative impact on reducing mobile emissions. This study investigated the changes of mobile emissions that could be caused by large-scale adoption of AVs. The factors of road capacity increase and speed limit increase impacts were simulated using a conceptual modeling approach that combines a hypothetical speed-emission function and a traffic demand model using a virtual transportation network. The simulation results show that road capacity increase impact is significant in decreasing mobile emissions until the market share of AVs is less than 80%. If the road capacity increases by 100%, the mobile emissions will decrease by about 30%. On the other hand, driving speed limit increase impact is significant in increasing mobile emissions, and the environmentally desirable speed limit was found at around 95 km/h. If the speed limit increases to 140 km/h, the mobile emissions will increase by about 25%. This is because some vehicles begin to bypass the congested routes at high speeds as speed limit increases. Based on the simulation results, it is clear that the vehicle platooning technology implemented at reasonable speed limit is one of the AV technologies that are encouraging from the environmental point of view.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.491-501
• /
• 2021

A difference in subgrade settlement between two rails of a track manifests as lateral differential subgrade settlement. This settlement causes unsteadiness in the motion of trains passing through the corresponding area. To illustrate the effect of lateral differential subgrade settlement on the dynamic response of a vehicle-track coupling system, a three-dimensional vehicle-track-subgrade coupling model was formulated by combining the vehicle-track dynamics theory and the finite element method. The wheel/rail force, car body acceleration, and derailment factor are chosen as evaluation indices of the system dynamic response. The effects of the amplitude and wavelength of lateral differential subgrade settlement as well as the driving speed of the vehicle are analyzed. The study reveals the following: The dynamic responses of the vehicle-track system generally increase linearly with the driving speed when the train passes through a lateral subgrade settlement area. The wheel/rail force acting on a rail with a large settlement exceeds that on a rail with a small settlement. The dynamic responses of the vehicle-track system increase with the amplitude of the lateral differential subgrade settlement. For a 250-km/h train speed, the proposed maximum amplitude for a lateral differential settlement with a wavelength of 20 m is 10 mm. The dynamic responses of the vehicle-track system decrease with an increase in the wavelength of the lateral differential subgrade settlement. To achieve a good operation quality of a train at a 250-km/h driving speed, the wavelength of a lateral differential subgrade settlement with an amplitude of 20 mm should not be less than 15 m. Monitoring lateral differential settlements should be given more emphasis in routine high-speed railway maintenance and repairs.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.405-412
• /
• 2016

In general, surface mounted PM synchronous motors (SPMSMs) are mainly adopted as a driving motor for high-speed applications, because they have high efficiency and high power density. However, the SPMSMs have some weak points such as the increase of magnetic reluctance and additional losses as a consequence of using a non-magnetic sleeve. Especially, the magneto-motive force (MMF) in the air-gap of the SPMSMs is weakened due to the magnetically increased resistance. For that reason, a large amount of PM is consumed to meet the required MMF. Nevertheless, it cannot help using the sleeve in order to maintain the mechanical integrity of a rotor assembly in high-speed rotation. Thus, in this paper, a multi-layer interior PM synchronous motor (IPMSM) not using the sleeve is presented and designed as an alternative of a SPMSM. Both motors are evaluated by test results based on a variety of characteristics required for an air blower system of a fuel cell electric vehicle.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.24-30
• /
• 2013

This paper studies the comparative analysis on two different internal cushion devices (the types of needle and relief valve) used to absorb the energy which is generated when the pneumatic cylinder moves with the load at meter-out speed control system. The effect at varying the piston velocity under same driving condition is mainly investigated. The simulation results on pressure in the cushion chamber and the dynamic behavior of the relief valve type cushion device are compared with the needle valve type. Design and performance are improved with the cushion configuration of better quality at high-speed pneumatic cylinder. Based on the relation between absorbed energy and impact energy at cushion process, cushion performance at pneumatic cylinder is evaluated.