• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2021-2031
• /
• 2013

Due to the rapid economic growth within the nation, the quality of life of individuals have improved dramatically. The scope of living activities of individuals have also extended, resulting in a rapidly increasing demand for automobiles. The number of vehicles registered in Korea is rapidly increasing and will reach 188.71 million as of December 2012. Compared to the registered residents of 50.94 million provided by the Ministry of Public Administration and Security, the registered population reflects about 4 people per every automobile. Due to the high demands for vehicles, the demands for parking lots in collective housing and businesses are also increasing. In reality, the current state of expansion of parking lots are underground, due to the limited available space on ground level. Specifically, the slope of a parking lot cannot exceed 17% linear slope and 14% curved slope according to the 'parking lot laws', however studies show that the driver feels at risk for safety when stopped on the parking ramp while driving in the parking lot. This study seeks to examine the suitability of parking lot ramps, concerning the safety aspects of the driver. First, the ramp type was categorized as linear or curved, then test drives were performed based on variations of slopes, slant distances, directions and points. A survey was administered to the driver after the completion of the test drive, in order to element design for an ideal ramp. In the case of curved ramp, the results of the estimate suggests a counterclockwise, slope at a maximum of 12% incline. The maximum slope for a linear ramp was analyzed to be between 13~14%, suggesting that slope greater than 15% need to be eliminated. In conclusion, it is anticipated that the element design parking ramp reported in this study will help to serve as a reference for future parking lot related guidelines, and provide cost effective traffic safety mechanisms in future parking lot businesses to follow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.81-90
• /
• 2018

The purpose of this study is to evaluate the effect of downward speed limit of urban arterial roads at 29 sites in Busan Metropolitan Police Agency to reduce road traffic accidents from '10 to '15. As a result of analyzing the traffic accidents occurred for 1~3 years after the decrease in the speed limit, the number of traffic accidents decreased by 3.09% and the number of injured persons decreased by 8.76%, but the number of deaths decreased by 36.73% The results of this study are as follows. The average speed reduction rate of 6.31km/h was decreased by investigating the change of the vehicle speed before and after the downward speed limit, and the change of average speed was statistically significant in most of the sections. The rate of compliance with the speed limit increased by 10.26% p, which is considered to have greatly improved overall traffic safety. A survey conducted by residents near the target area with a lower speed limit showed that 57.9% of the respondents felt the driving speed of the vehicle was lowered. However, this project was focused on vehicles with limited speed road signs and traffic safety signs, Only 25.8% of respondents said walking safety was improved. In the future, it is necessary to consider the safety of pedestrians by improving roads around roads such as road curvature and separation. In addition, there is a clear positive result in terms of decreasing the fatal accidents in the downward speed limit zone of Busan Metropolitan Subway. However, more detailed analysis is needed for the 29 accidents. Therefore, it is expected that traffic practitioners will be able to utilize it as a basis to increase the accident reduction effect by setting an appropriate speed limit based on the easy and objective grounds.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.133-144
• /
• 2004

A model and a measure which can evaluate the risk of rear end collision are developed. Most traffic accidents involve multiple causes such as the human factor, the vehicle factor, and the highway element at any given time. Thus, these factors should be considered in analyzing the risk of an accident and in developing safety models. Although most risky situations and accidents on the roads result from the poor response of a driver to various stimuli, many researchers have modeled the risk or accident by analyzing only the stimuli without considering the response of a driver. Hence, the reliabilities of those models turned out to be low. Thus in developing the model behaviors of a driver, such as reaction time and deceleration rate, are considered. In the past, most studies tried to analyze the relationships between a risk and an accident directly but they, due to the difficulty of finding out the directional relationships between these factors, developed a model by considering these factors, developed a model by considering indirect factors such as volume, speed, etc. However, if the relationships between risk and accidents are looked into in detail, it can be seen that they are linked by the behaviors of a driver, and depending on drivers the risk as it is on the road-vehicle system may be ignored or call drivers' attention. Therefore, an accident depends on how a driver handles risk, so that the more related risk to and accident occurrence is not the risk itself but the risk responded by a driver. Thus, in this study, the behaviors of a driver are considered in the model and to reflect these behaviors three concepts related to accidents are introduced. And safe stopping distance and accident occurrence probability were used for better understanding and for more reliable modeling of the risk. The index which can represent the risk is also developed based on measures used in evaluating noise level, and for the risk comparison between various situations, the equivalent risk level, considering the intensity and duration time, is developed by means of the weighted average. Validation is performed with field surveys on the expressway of Seoul, and the test vehicle was made to collect the traffic flow data, such as deceleration rate, speed and spacing. Based on this data, the risk by section, lane and traffic flow conditions are evaluated and compared with the accident data and traffic conditions. The evaluated risk level corresponds closely to the patterns of actual traffic conditions and counts of accident. The model and the method developed in this study can be applied to various fields, such as safety test of traffic flow, establishment of operation & management strategy for reliable traffic flow, and the safety test for the control algorithm in the advanced safety vehicles and many others.

• Korean Security Journal
• /
• no.23
• /
• pp.21-39
• /
• 2010

The dangerous impact on the traffic flows of cars is caused by no only the construction on the street but diverse construction sites. This in turn substantially influence on the citizens and pedestrians, thereby bring about the possibility of giant incidents. As the countermeasure for the problem in advanced countries, particularly in Japan "traffic inducement security system" has been implemented. It is analyzed that the death toll from traffic accidents has considerably declined. In the case of South Korea the system has not been administered but restrictively executed at some construction sites; however proceeding it with the lack of professionalism. The introduction of traffic inducement security system would be the opportunity for South Korea to make a progress in the safety culture such as traffic security and traffic jam. This study thus aims at analyzing the advanced countries' cases, conducting comparative analysis with Korea's scheme, and establishing the plan to adopt the traffic inducement security system. Through the output of this study followings were proposed as plans of introducing the traffic inducement security system. First of all, legal assessments regarding traffic inducement operation, for example adding the operation of the system into the category of security service, need to be preceded prior to its introduction secondly, the traffic inducement security is the institution which can contribute to the improvement of traffic safety, and also internalizing social cost. therefore, it needs to be equipped with the new qualification such as the instruction with the standardized traffic safety map, instruction system, curriculum and the publication of teaching materials. thirdly, the education for the guard should be proceeded with dividing academic and technical ones with specific curriculum. At the fourth, the securement of the venue for the driving training, the determination on technical instruction contents and the training professional instructor needs for the method of administration. In addition, the efforts on the overal standardization of traffic inducement security is necessary, and it also requires constant collaboration among private security industry, academia, professionals, relavant research institutes, etc. At the last but the least, henceforth it is prerequisite that the networking system with a diverse array of associated entities due to its social ripple effect and job creation effect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• Journal of agricultural medicine and community health
• /
• v.28 no.2
• /
• pp.61-70
• /
• 2003

Objectives: Traffic accidents often occur to power tillers without reflective light in the dawn, evening and night. Because of this reason, there has been a 'campaign to attach reflective lights' to power-tillers in recent years. Therefore, the authors investigated the relationship between reflective light and traffic accidents involving power-tillers. Methods: We defined traffic accidents of power tillers as those cases of rear-end collision by a car in the dawn, evening or night. According to our definition, four cases were confirmed in Hyungok-myeon, Gyeongju and five cases in Gigye-myeon, Pohang. We selected a control group from people in the same village with similar age, sex, driving history and education. Results: The study group contained 9 accidents and 36 non-accidents. Power tillers with reflective light were 32 cases (72.7%) of 44 cases (excluded one case due to death). Of those, the status of reflective light was 'clean' in 18 cases (56.3%). The recognition that reflective light can prevent accidents was 'Yes' in 26 cases of 44 cases (59.1%). The recognition of the 'campaign to attach reflective lights' to power tillers was 'Yes' in 38 cases of 44 cases (86.4%). The recognition about the safety regulation of driving power-tillers was 'Yes' in 32 cases of 44 cases (72.7%). Odds ratio of traffic accidents for no reflective light was 7.00 (95% CI: 1.06-58.37). Conclusions: Although the 'campaign to attach reflective lights' to power tillers are going on, its effectiveness may unknown. Therefore, more extensive epidemiologic study is needed into the relationship between reflective light and power tiller traffic accidents, with effective administration of the government and the attention of medical persons.

• Journal of Intelligence and Information Systems
• /
• v.28 no.1
• /
• pp.287-310
• /
• 2022

Companies' interest in developing AI-based intelligent new products is increasing. Recently, the main concern of companies is to innovate customer experience and create new values by developing new products through the effective use of Artificial intelligence technology. However, due to the nature of products based on radical technologies such as artificial intelligence, intelligent products differ from existing products and development methods, so it is clear that there is a limitation to applying the existing development methodology as it is. This study proposes a new research method based on KANO-TOPSIS for the successful development of AI-based intelligent new products by using car voice assistants as an example. Using the KANO model, select and evaluate functions that customers think are necessary for new products, and use the TOPSIS method to derives priorities by finding the importance of functions that customers need. For the analysis, major categories such as vehicle condition check and function control elements, driving-related elements, characteristics of voice assistant itself, infotainment elements, and daily life support elements were selected and customer demand attributes were subdivided. As a result of the analysis, high recognition accuracy should be considered as a top priority in the development of car voice assistants. Infotainment elements that provide customized content based on driver's biometric information and usage habits showed lower priorities than expected, while functions related to driver safety such as vehicle condition notification, driving assistance, and security, also showed as the functions that should be developed preferentially. This study is meaningful in that it presented a new product development methodology suitable for the characteristics of AI-based intelligent new products with innovative characteristics through an excellent model combining KANO and TOPSIS.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.81-92
• /
• 2013

The satellite includes many release mechanisms such as solar array deployment, antenna deployment, cover to protect contamination in scientific equipment, pyro value of the propulsion subsytem, and bypass device in Li-Ion cell module. A drive the initiators is a critical to the successful mission because the initiators of release mechanism driving by the pyrotechnic circuit is operated in single short. The pyrotechnic circuit has to provide switching network for safety. A typical switching network has defect consisting of high current rating fire switch to handle switching transient current during fire the initiator. The pyrotechnic circuit is required some form of power conditioning to reduce the peak power demanded from the bus if the initiators are to be fired from the main bus. This paper design a pyrotechnic circuit synchronized to the fire-command to activate the fire switch to overcome use high current rating fire switch to handle switching transient current during fire the initiator. The pyrotechnic circuit provides a current limited widow pulse for fire current synchronized to the fire-command to insure that fire switch will only carry the current but never switch it. The current limited widow pulse for fire current can be possible to use low current rating and light mass switch in switching network. The current limit function in the pyrotechnic circuit reduces supply voltage to initiator and provides the effect of power conditioning function to reduce peak bus power. The pyrotechnic circuit to apply satellite development on geostationary orbit is verified the function by test in development model.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.67-84
• /
• 2012

Recent increases in uncertainty and speed of market change are driving the adoption of new intelligent mobile office systems. Organizational information systems paradigm suggests that a right match between organizational characteristics and the use of technology is critical in producing desired results. Following such perspective this study developed the mobile office system case of Seoul Metropolitan Railway Transit(SMRT) in Korea. SMRT developed the mobile task-supporting environment that help the management of subway lines real-time without the restriction of time and space. They named the system as ST&F(SMRT Talk and Flash). They decided to develop the application systems in-houses they did not want to be overly dependent on external services in future changes and developments of the system. The new practice reduced the time for moving back and forth to 10% of their working time from previous 20%. The time used for paper works and administration chore also reduce to 10% of their working time from previous 30% on the average. The employees could use 80% of their time to concentrate on the completion of assigned task. The effects of this improvement resulted in the heightened efficiency of the use of human resources and the heightened level of railway safety. The case of SMRT shows that the mobile office system can be applied and extended to various business areas such as facility management and maintenance beyond such typical uses as sales and marketing support. Also, The result of case study will be a useful guideline on the construction and using of mobile office system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.130-137
• /
• 2017

Due to the economic growth and development of construction technology, a role of foundation to resist heavy loads has been increased. In this present study to improve the structural performance of reinforced concrete pile, the precast HPC pile reinforced with rebar and filling concrete was developed and the strength of pile was predicted based on the limit state design method. The safety of HPC pile strength was evaluated by comparing with the design values. The geometry of HPC pile is a decagon cross section with a maximum width of 500 mm and a minimum width of 475 mm, and the hollow head of pile thickness is 70 mm. The inner area of the hollow head part was made as the square ribbed shape presented in the limit state design code in order to achieve horizontal shear strength between pile concrete and filling concrete. From the shear test results, it was found that the stable shear strength were secured without abrupt failure until maximum load stage despite the shear cracks was found. Shear strength is 135% and 119% higher than that of design value calculated from limit state design code. The driving test results of HPC pile according to the presence of additional reinforcement showed the outstanding crack resistance against impact loads condition. From the bending test results the flexural load between PHC pile and HPC pile was 1.51 times and 1.48 times higher than that of the design flexural load of conventional PHC pile.