• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권6호
• /
• pp.271-280
• /
• 2017

본 논문에서는 자동차의 안전운전을 위해서 운전자의 생체정보를 수집하여 운전자의 상태에 따라 운전자에게 적절한 경보를 하거나, 직접 자동자를 제어할 수 있는 기반 시스템을 제시하였다. 기존의 운전자 얼굴정보를 촬영하여 정보를 획득하거나, 운전자의 시트나 스티어링 휠에 센서를 장착하여 생제정보를 획득하는 방식이 부정확하거나 단속적인 정보만을 얻을 수 있는데 비하여, 본 논문에서 제시한 웨어러블 장치는 의료장비 수준의 정확도를 얻을 수 있었으며, 지속적으로 높은 정확도의 생체신호를 얻을 수 있었다. 개발된 웨어러블 장치에는 심박, 피부전도도, 피부온도를 측정할 수 있는 센서를 장착하였으며, 자동차에서 발생되는 각종 잡음을 제거할 수 있는 필터 기술을 적용하였고, 가속도센서와 자이로 센서를 장착하여 측정 오차를 제거하는 기술을 적용하였다. 수집된 생체신호를 바탕으로 운전자의 상태를 판별할 수 있는 기준을 제시하였고, 공인인증기관에 의뢰하여 의료수준 정도의 정확성이 있음을 검증하였다. 실험실 시험과 실차 시험을 통하여 개발된 장치가 운전자의 상태를 측정할 수 있는 장치로 활용될 수 있음을 검증하였다.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.76-82
• /
• 2006

자동차 바퀴 방향 지시기란 운전자가 차 내부에서 자동차의 바퀴 방향을 실시간으로 알 수 있도록 전자 장비에 바퀴의 방향을 표시해주는 시스템으로서, 본 연구에서는 자동차 핸들의 회전량을 측정하여 LED(Light Emitted Diode)와 LCD(Liquid Crystal Display)에 자동차 바퀴에 대한 방향 정보를 표시하는 시스템을 개발하고자 한다. 즉, 이렇게 자동차의 핸들 회전량을 측정하여 그 측정 데이터를 데이터 처리부에 적절하게 적용함으로써 자동차 내부에서 운전자가 인지할 수 있도록 해준다면 주차된 차를 주행하기 위해 자동차 창문을 열고 바퀴 방향을 봐야하는 등의 번거로움을 해소시킬 수 있을 것이라 사료된다.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.186-193
• /
• 2000

EPS(Electric Power Steering) systems have many advantages over traditional hydraulic power steering systems in space efficiency engine efficiency and environmental compatibility. In this paper an EPS system control logic using a torque map is proposed. The main function of the EPS system is to reduce the steering torque exerted by a driver by assist of an electric motor. Vehcile speed steering torque and steering wheel angle are measured and fed back to the EPS control system where appropriate assist torque is generated to assist the operator's steering effort. Another capability of the EPS system for easy adaptation to different steering feels via simple tuning is demonstrated by the experiments. It will be also verified that the EPS system can also improve damping and return performance of the steering wheel by control of the assist motor.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.107-117
• /
• 1998

As the traffic congestion and parking problems in urban areas are increased the tall and narrow commuter vehicles have interested as a means to increase the utilization of existing freewa- ys and parking facilities. However, in hard cornering those vehicles could reduce stability against overturning compared to conventional vehicles. This tendency can be mitigated by tilting the body toward the inside of the turn. In this paper those tilting vehicles are considered in which at speed at least, the tilt angle is controlled by steering the front wheels. In other word, if the driver turns the steering wheel the tilt controller automatically steers the road wheel to tilt the body inside of the turn. Also, the dynamic tilting vehicle model with tire slip angles is constructed by adding the roll degree of freedom. Finally, through computer simulation the behaviors of the tilting vehicles are investigated.

• 대한산업공학회지
• /
• 제25권2호
• /
• pp.173-183
• /
• 1999

The three design elements of automobile occupant packaging such as pedals, steering wheel, and seat are the most important factors to design an ergonomically sound layout for improving driving comfort and performance. The aim of the study is to find out coherent characteristics of the relationships among three design elements. For this purpose, Triangular Method is suggested. We extracted properties for determining the shape, size, and location of the triangle that is composed of Accelerated Heel Point, Steering Wheel Point, and Hip Point. An experiment was conducted at a seating buck in which the design elements are freely adjustable by the subject to investigate driver's preferred arrangement of three elements. Statistical analyses revealed that there was a subtle change in the shape of triangle according to different percentiles and that the significant difference was observed only for the size of the triangle. The results will be effectively applied to design a comfortable seat packaging layout.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.124-129
• /
• 1997

The purpose of this study is to predict the stability and frequency response of multipurpose vehicle. The vehicle model has seven degrees of freedom. The motion equations are derived by using Lagrangian equation and linearized. The positions of eigenvalues of model which are dominated by lateral velocity, yaw rate, roll rate of sprung mass are used to predict the stability of motion. The resonse of sprung mass to steering wheel is simulated in time domain. It is predicted that the roll response of sprung mass would rather be improved by modifying the position of eigenvalues. The responses of sprung mass to steering wheel are also simulated in frequency domain. The magnitude and phase plots of gains are evaluated in driver's steering input frequency range.

• 센서학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2018

Unlike the hydraulic power steering (HPS) system, which operates by the high pressure of a fluid obtained from the engine power, the motor-driven power steering (MDPS) system uses an electric motor to steer the wheel without consuming engine power. To steer the wheel with an electric motor, a worm wheel and a worm gear rotating between the steering shaft and motor are required. Any imperfection during the construction of an MDPS system or in a composing part creates noise and vibration, which can be sensed by a driver. To solve the noise and vibration problems, each part must be designed to not resonate with other parts. In this work, we developed the measurement and analysis systems to obtain the noise and the vibration of an automobile MDPS system. A signal analyzer was equipped with a 96 kHz, 24-bit ADC and a 150 MHz digital signal processor. The predetermined threshold value of the vibration in the MDPS system was used to determine the pass/fail, and the results were displayed on the screen. Our system can be used in the fabrication line to swiftly determine any imperfections in the MDPS system construction.

• 소음진동
• /
• 제10권2호
• /
• pp.247-253
• /
• 2000

The evaluation of the ride quality had been performed by the subjective method before ISO2631(International Organization for Stadard 2631) and BS6841(British Standard 6841) was precented, but many research programs have been performed by the objective method after that. On this study, the ride quality was evaluated related with the objective method which considered the vibration which the human body feels on the driver's seat while driving on the road. In particular, we made the shock absorber nonlinear model and also selected the suitable shock absorber in the part of the vibration which the human body feels into the simulation. The shock absorber of suspension was dealt with 3 cases respectively with the front wheel and rear wheel. The vibration of the car driving on the road can be transferred to the wheel, the suspension, the vehicle body, the seat and the human body. The signal which was gained from the seat(hip) and the floor(foot) of the human body was changed to the vibration signal which the human body felt through using the frequency weighting function. And then the performance of the shock absorber was calculated through the statistic processing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1195_1196
• /
• 2009

Light rail transit is classified to rubber-tired LRT, lear induction motor LRT, steel wheel LRT, monorail and tramway. LRT except for tramway are usually operated without driver and tramway are driven depending on driver's sight like usual car. LRT, which is one type of urban guided transit, shall be operated according to domestic "Operational Regulation for Urban Guided Transit" but existing regulation does not contain the safety related codes for driverless operation. In this paper, we investigate "IEC 62267 : Railway Application-Safety Requirements for Automated Urban Guided Transit" and compensate for existing operational regulation by referring to international standard and operational rule of commercial line.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.69-73
• /
• 1998

With increased loads in steered wheels and wider section tires the effort required at the steering wheel makes the driver's job very tiring and difficult. Improvements such as an increase in the mechanical efficiency of the steering system or lower steering box ratios help the reduce driver fatigue. Now using of power steering is increasing. It needs to be considering parts size of steering system as using power steering. This paper presents adjust part size of steering system form estimating reliability according to reducing torque under the dynamic load, In this paper, the spider of universial joint is selected to prove relation between steering and power steering reliability.