• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.359-361
• /
• 2007

본 논문은 CNT(Carbon Nano Tube) FEL(Field Emission Lamp)에서 애노드(Anode)-캐소드(Cathode) 구동용 고전압 구동 회로 구현에 관한 것이다. 본 논문에서 제안하는 고전압 DC 전원 회로는 턴비가 높은 고전압 트랜스포머의 Leakage 인덕턴스를 이용하는 Series-Resonant 형태의 Full Bridge 컨버터를 적용하고 고전압 트랜스포머와 Voltage Multiplier를 이용한다. 고전압 트랜스의 절연전압을 줄이기 위해서 두개의 트랜스포머와 Voltage Multiplier를 이용하여 애노드 전극에는 Positive 고전압, 캐소드 전극에는 Negative 고전압을 인가한다. 이 경우 애노드와 캐소드 사이의 아크 방전 시에도 구동 IC 및 스위칭 소자를 보호할 수 있는 장점이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.979-981
• /
• 2003

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.190-195
• /
• 2004

An exhaust brake system is composed of a gate valve, a pneumatic cylinder and an on-off solenoid valve. An on-off solenoid valve which is a key component of the exhaust brake system ought to have characteristics such as high reliability and long life for reducing the foot brake and tires damage, and for driver's fatigue relief of middle/large size vehicles running a long distance. In this paper, an on-off solenoid valve which is used for vehicle brake system was studied. For the performance evaluation of the on-off solenoid, electromagnetic characteristics and dynamic characteristics are analyzed. On the basic study for the performance improvement of exhaust brake system, pneumatic circuit and pneumatic valve of on-off solenoid type were suggested and the performance of pneumatic valve through the test procedure was evaluated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.427-428
• /
• 2014

독립형 태양광 LED가로등은 태양광 발전 전압, 배터리 충전전압, LED구동전압 등이 상이하므로 이러한 전압을 적절하게 매칭하기 위해서는 여러 가지 타입의 컨버터 회로가 이용되어야 한다. 하나의 시스템에 여러 가지 상이한 전압을 매칭하기 위해서 주로 쓰이는 방식은 벅-부스터 컨버터 회로로서 부스터 컨버터를 활용할 때 벅 컨버터만을 사용하는 부분에 비해서 효율이 저하되는 문제가 있다. 본 논문에서는 부스터 컨버터 대신 전압 더블러를 사용하여 전압을 2배로 상승시키고 벅 컨버터 회로만으로 상이한 전압을 매칭하는 방법으로 효율을 높이고자 한다. 이러한 새로운 토폴로지의 검증을 위하여 시뮬레이션을 수행하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.299-299
• /
• 2007

This paper presents an omni-directional piezoelectric actuator which utilizes only one actuator. The actuator has a simple structure of cone type consists of two piezoelectric ceramics of ring type and electrodes divided four segments and a stainless steel body. To find the optimal operating condition of the actuator, the frequency characteristics of the actuator are analyzed by ATILA, FEM and measured by Impedance Analyzer. We have also developed a stage using the omni-directional actuator and an actuator driver circuit to create four sinusoidal waves with a variable frequency and phase difference.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.81-87
• /
• 2002

The modelling and controller design of the EMV(electro-magnetic valve) for vehicle engine are considered in this paper. For the analysis and controller design, the governing equation of the EMV system is derived. For a good performance of the system, the start control, the holding control and the swing control are included in the controller design of the EMV system. In order to reduce landing speed of the valve, the on-time delay control which mainly come from the optimal control theory is employed. In order to reduce the power consumption of the system, the pick-up and hold operation has been used for the magnetic coil. The simulation and experimental results are presented to show the validity of the control method.

• 디지털산업정보학회논문지
• /
• 제17권3호
• /
• pp.9-15
• /
• 2021

In this paper, the Embedded MEMS system to the power apparatus used Edge Impulse machine learning tools and therefore an improved predictive system design is implemented. The proposed MEMS embedded system is developed based on nRF52840 system and the sensor with 3-Axis Digital Magnetometer, I2C interface and magnetic measurable range ±120 uT, BM1422AGMV which incorporates magneto impedance elements to detect magnetic field and the ARM M4 32-bit processor controller circuit in a small package. The MEMS embedded platform is consisted with Edge Impulse Machine Learning and system driver implementation between hardware and software drivers using SensorQ which is special queue including user application temporary sensor data. In this paper by experimenting, TensorFlow machine learning training output is applied to the power apparatus for analyzing the status such as "Normal, Warning, Hazard" and predicting the performance at level of 99.6% accuracy and 0.01 loss.

• 항공우주시스템공학회지
• /
• 제14권6호
• /
• pp.74-78
• /
• 2020

The cooler driver electronics (CDE) for maintaining a low temperature of a satellite payload IR sensor has a compressor with a pulsation current load when in operation. This pulsation current creates a large voltage fluctuation and may negatively affect both the load and regulated bus stability. Thus, a CDE power conditioning system has a battery for use as a buffer that is connected in front of the CDE load line. In this system, a battery charger limiter circuit is required to protect from an over-charge of the battery and power to the load. In this study, an optimal design and parameter selection were developed and simulated.

• 한국산업정보학회논문지
• /
• 제17권7호
• /
• pp.35-41
• /
• 2012

본 논문은 최근 급속히 늘어나고 있는 승강장 스크린 도어장치 제어의 효율성과 안전성을 확보하기 위해 현재 스크린 도어에 적용되고 있는 BLDC 기어드모터 제어시스템을 대치할 수 있는 고효율, 고토크 기어리스 PMAC 모터를 스크린 도어장치에 적용시키 위한 드라이브 및 제어장치 설계, 제작 및 적용에 관한 시스템 개발 연구이다. 개발시스템은 구동장치를 단순화하기위해 고효율 및 고 토크의 영구 자석형 BLAC 모터와 그에 따르는 구동드라이버를 채택하여 도어 구동시스템을 단순화하여 고장요인을 줄이고 에너지를 절약할 수 있도록 한다. 본 연구에서는 스크린도어 제어시스템 구성, 고효율 PMAC 모터를 Drive 하기 위한 회로설계, PMAC 모터 Drive 보드 제작, 구동 프로그래밍을 위한 알고리즘 및 구현 및 테스트 결과 등에 관하여 고찰한다.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.85-90
• /
• 2012

A 40-MS/sec 10-bit pipelined analog to digital converter (ADC) with a 1.2 Vpp differential input signal is proposed. The implemented pipelined ADC consists of eight stages of 1.5 bit/stage, one stage of 2 bit/stage, a digital error correction block, band-gap reference circuit & reference driver, and clock generator. The 1.5 bit/stage consists of a sub-ADC, digital to analog (DAC), and gain stage, and the 2.0 bit/stage consists of only a 2-bit sub-ADC. A bootstrapped switch with a constant resistance is proposed to improve the linearity of the input switch. It reduces the maximum VGS variation of the conventional bootstrapped switch by 67%. The proposed bootstrapped switch is used in the first 1.5 bit/stage instead of a sample-hold amplifier (SHA). This results in the reduction of the hardware and power consumption. It also increases the input bandwidth and dynamic performance. A reference voltage for the ADC is driven by using an on-chip reference driver without an external reference. A digital error correction with a redundancy is also used to compensate for analog noise such as an input offset voltage of a comparator and a gain error of a gain stage. The proposed pipelined ADC is implemented by using a 0.18-${\mu}m$ 1- poly 5-metal CMOS process with a 1.8 V supply. The total area including a power decoupling capacitor and the power consumption are 0.95 $mm^2$ and 51.5 mW, respectively. The signal-to-noise and distortion ratio (SNDR) is 56.15 dB at the Nyquist frequency, resulting in an effective number of bits (ENOB) of 9.03 bits.