• Human Ecology Research
• /
• v.53 no.5
• /
• pp.475-488
• /
• 2015

Economic activity and social participation by women has recently increased; however, working mothers raising young children are under new stress due to the simultaneous combination of job and parenting responsibilities. This stress has resulted in social problems of career break and low fertility. This study investigates the effect of clinical art therapy on occupational stress and parenting stress of working mothers. We analyzed 34 working mothers in full-time employment (over 8 hours a day) who have preschool children (0-6 years old). They were divided into 17 subjects in the experimental group and 17 subjects in the control group. For the experimental group, 10 hours and a half sessions of group art therapy were participated in once a week from April to August in 2014. We perform Dan Occupational Stress Index by Ivancevich and Matteson, Parenting Stress Index/Short Form and salivary cortisol test before and after the group art therapy. For qualitative analysis, Kinetic House-Tree-Person (KHTP) drawing test was used. Using SPSS ver. 19.0, paired t -test or Wilcoxon signed rank test compared the pre and post analysis results. The results of this study are as follows. First, scores of 'occupational stress factor' subpart showed significant improvement in the Occupational Stress Index after the clinical art therapy. Second, scores of 'parental distress,' 'parent-child dysfunctional interaction,' and 'difficult child' subpart in Parenting Stress Index also showed a significant improvement. Third, a positive change was observed after the clinical art therapy in the KHTP drawing test. In conclusion, this study suggests that the clinical art therapy can be effective for occupational stress factors and the parenting stress of working mothers.

• Journal of the Korea Convergence Society
• /
• v.10 no.5
• /
• pp.85-94
• /
• 2019

This study was aimed to identify a study on the effect of chest compressions combined with abdominal drawing-in technique on prevention of back pain and chest compression quality. We tested motion analysis, electromyography, and chest compression quality of 15 paramedics. Data were normalized to SPSS 21.0 (Kolmogorov-Smirnov and Shapiro-Wilk test). The paired t-test was used for the pre- and post-test chest compressions, the one-way ANOVA was used for the analysis of the measurement point-in-time differences, and LSD was used for the post-test. The results of the study showed significant difference in muscle activity and chest compression success rate when the chest pressure was applied with abdomen drawing-in. Therefore, it is necessary to study cardiopulmonary resuscitation education which can increase the chest compression success rate while preventing the back pain of the paramedics in the future.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.127-132
• /
• 2003

In a today industry, the welding is doing a many portion in structure manufacture. This study is simulated heat of heat-effected zone and researched a mechanical properties and ultrasonic characteristic in used the SS400 and the STS304. As the result mechanical properties of steel that become drawing decreased because of remaining stress by strain gardening according as simulated heat temperature rises, but according as temperature rises in material that do simulated heat after have done annealing, mechanical propensity was improved. The velocity and attenuation become different by effect of remaining stress than effect of material internal microstructure in ultrasonic wave test. In the case of STS304, there was change in mechanical properties by effect that is by strain hardening, but there was no change in material that simulated heat after annealing. When become drawing in ultrasonic waves test, according as simulated heat temperatures rise, change of attenuation coefficient is looked, but material that simulated heat after annealing was no change almost both the volocity and attenuation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.83-90
• /
• 2004

The drawbead is one of the most important factors in sheet metal forming for automotive parts. So clarifying the friction characteristics between sheets and drawbead is essential to improve the formability of sheet metal. Therefore in this study, drawbead friction test was performed at various panels(cold rolled steel sheets, galvanized steel sheets, electrogalvanized coating steel sheets, electrogalvanized Zn-Fe alloy steel sheets and aluminum alloy steel sheets). Circular shape bead has been used for the test. The results show that friction and drawing characteristics were mainly influenced by the nature of zinc coating.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.27-34
• /
• 2008

The temperature distribution in the weldment is not uniform because a weldment is locally heated. Thermal plastic deformation results from the local expansion and shrinkage by the heating and cooling of metal. Therefore, residual stresses and distortion occur in the weldment. In this study, we had conducted on the weld thermal cycle simulation that is supposed as the HAZ on SS400 steel and STS304 steel. The residual stresses that were obtained from the drawing and the weld thermal cycle simulation were estimated by X-ray diffraction. We also carried out ultrasonic test for the weld thermal cycle simulated specimens, and then conducted on nondestructive evaluation by the ultrasonic parameters obtained ultrasonic test. From the results, residual stresses of weld thermal cycle simulated specimens after the residual stress removal heat treatment are lower than that of the drawing.

• Korean Journal of Health Education and Promotion
• /
• v.29 no.3
• /
• pp.103-114
• /
• 2012

Objectives: The purpose of this study was to investigate the relationship between mental health status, stress, coping ability, and coping strategies of college students. Methods: The questionnaires were handed out to 162 college students in the Gyeonggi province. Data was collected using the Symptom Checklist-90-Revised (SCL-90-R) scale of the 90 items, the 'Person in the Rain' drawing test, and the 20-item coping strategies questions. Results: 17.3% of the respondents were belonged to the groups of abnormal or abnormal tendency in the mental health status according to the Global Severity Index (GSI) scores. The clinical/border groups were more commonly used in the 'emotion-focused' coping strategies compared to the normal group. This difference was also statistically significant. Both coping resource and coping ability were significantly associated with the mental health status. Conclusions: These findings suggest that future intervention for effective coping strategies should be carefully designed to promote better mental health among college students. It is also important to detect problematic and weak student's behaviors in the early stages.

• The Journal of Society for e-Business Studies
• /
• v.9 no.3
• /
• pp.57-77
• /
• 2004

The main purpose of this study is to develop XML schemata and related STEP model for sharing construction drawings information. To achieve this purpose, the authors have developed a drawing information model based on STEP/AP202, the data searching mechanism based on STEP, and XML schemata for sharing and exchanging information between vector data and non-shape attribute information. Finally, the authors have suggested the way of sharing drawing information through linked STEP data and a XML schema using test cases of construction material information and code checking. The study shows a way of optimized managing and sharing construction information through the drawing information and external data for the whole building life-cycle, from early design stage to the construction stage.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.351-356
• /
• 2014

The current study aims to predict the forming limits considering the deformation characteristics of tailor rolled blank(TRB) during hot stamping. The formability of TRB is affected by the TRB line orientation because elongations change due to the intrinsic geometry within the sheet. To evaluate the forming limits, Nakazima tests were conducted at elevated temperatures with different TRB line orientations. Forming limit diagrams(FLD) of TRB can be predicted by an interpolating equation based on the Nakazima test. Predicted FLDs were used in FE-simulations of a rectangular drawing. The predicted limit drawing height was compared with experimental results. The simulation results show good agreement with the experimental ones with an error range of 3%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.161-164
• /
• 1999

In order to investigate the effect of punching condition on the stretch flange formability of sheet for deep drawing hole expansion tests at various edge condition were done. Edge conditions were changed by altering tool clearances artifical defects grinding and deburring. For a determination of optimum edge condition of side panel of automobile punched section analysis and forming results were studied and the laboratory test results were used. In case of considered side panel tool clearance should be less than 15% and punched edge should be uniform without defects for safe forming

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.151-154
• /
• 1998

Stainless steel sheets are widely used to produce electrical appliances. But there are various problems occured in forming stainless steel sheets such as scratch, local fracture, earing. So the productivity of electrical appliances made of stainless steel sheets is decreased. And it is very important to improve the formability of stainless steel sheets. In this study, rectangular cup drawing tests have been carried out to obtain optimum process parameters for improving the formablity of stainless steel sheets. In the tests, selected process parameters are materials of dies and punches, lubricating conditions, and blank holding force. From the test results, we suggest the appropriate conditions to be applicable to the actual manufacturing processes.