Evaluation of Characteristic for SS400 and STS304 Steel by Weld Thermal Cycle Simulation - 3rd Report: Residual Stress and Ultrasonic Parameter |
Ahn, Seok-Hwan
(School of Mechanical Engineering Pukyong National University)
Choi, Moon-Oh (Busan Fire Services) Jeong, Jeong-Hwan (Korea Institute of Ceramic Engineering and Technology) Kim, Sung-Kwang (Defence Agency for Technology and Quality) Nam, Ki-Woo (Division of Materials Science and Engineering, Pukyong National University) |
1 | 남기우, 박소순, 안석환 (2003a). 'STS316L 모재 및 용착부의 열처리에 따른 초음파 특성', 대한금속. 재료학회지, 제41권, 제3호, pp 186-195 |
2 | 미곡 무 (1983). 잔류응력의 발생과 대책, 양현당 |
3 | 스토우 하지메 (2003). 잔류응력과 뒤틀림, 우치다 로카쿠호 |
4 | 안석환, 정정환, 남기우 (2005). '용접열사이클 재현에 의한 SS400강 및 STS304강의 특성 평가 - 제1보: 기계적특성 및 조직', 한국해양공학회지, 제19권 제6호, pp 64-71 과학기술학회마을 |
5 | 안홍조, 이찬우, 이창희 (2000). 'C-Mn 구조용강 열영향부의 결정 립 성장 거동 예측 모델링', 대한금속. 재료학회지, 제 38권, 제6호, pp 841-850 |
6 | 홍순택, 권숙인, 조웅용 (1999). '초음파 감쇠측정에 의한 탄소 강 미세조직의 비파괴적 평가', 대한금속학회지, 제37권 제7호, pp 754-759 |
7 | 장경호, 이진형, 신영의 (2004). '고강도강재의 고온인장특성 및 용접시 잔류응력특징에 관한 연구', 대한용접학회지, 제22권, 제4호, pp 346-354 |
8 | Kinami, T. and Kimura, A. (1992). 'Effect of Temperature on Deformation Charistics of Stainless Steels under High Speed Forming Conditions', DENKI-SENKO, Vol 63, No 2, pp |
9 | 사토우 쿠니히코, 우에다 유키오, 후지모토 츠기오 (1980). 현대 용접기술대계-용접변형 . 잔류응력, 산보출판 |
10 | 일본용접학회 (1990). 용접. 접합편람, 마루젠주식회사, pp 810-811 |
11 | American Welding Society (1976). Welding Handbook Fundamentals of Welding, 7 Edition, Vol 1, pp 222-282 |
12 | 이충헌, 김경애 (1999). 초음파탐상 검사, 세진사, pp 51-57 |
13 | Adler, T.A. and Walters, R.P. (1993). 'Repassivation of 304 Stainless Steel Investigated with a Single Scratch Test', Corrosion, Vol 49, No 5, pp 399-408 DOI ScienceOn |
14 | 이용복, 조남익, 박강은, 1996, 'SS400 용접부의 표면피로균열거동에 관한 연구', 대한용접학회지, 제14권 제2호, pp 124-129 |
15 | 이익성, 주재현 (1996). '인발가공 조건이 잔류응력 발생에 미치는 영향', 한국소성가공학회 및 대한금속학회 공동심포지움, pp 163-175 |
16 | Tomimura, K. and Takaki, S. (1988). 'Reversion Process of Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steel', Tetsu to hagane, No 8, pp 1649-1656 |
17 | 박은수 (1992). 초음파법에 의한 철강(SCM440)의 표면경화층의 결정입도 및 조직변화에 관한 연구, 한양대학교 박사학위논문 |
18 | 오세규, 김동조, 한상덕(1987). '이종재 마찰용접 이음부에서 초음파 반사계수와 용접부와의 관계', 한국해양공학회지, 제1권 제1호, pp 138-143 |
19 | 김효준, 이상익 (1989). '과공정 CV흑연주철에서 주물의 직경이 기지조직, 기계적 성질 및 초음파속도에 미치는 영향', 대한금속학회지, 제27권 제9호, pp 784-792 |
20 | 이종섭, 김숙환 (1998). '오스테나이트계 스텐인리스강 용접부의 금속학적 현상에 관한 연구(I) - 시판 오스테나이트계 스테인리스강의 용접성-', 대한용접학회지, 제16권 제3호, pp 239-248 |
21 | 박은수, 박익근, 송성진 (2002). 비파괴평가공학, 학연사, pp 227-231 |
22 | Solomon, H.D. (1985). 'Influence of Prior Deformation and Composition on Continuous Cooling Sensitization of AISI 304 Stainless Steel', Corrosion, Vol 41, No 9, pp 512-516 DOI ScienceOn |
23 | 남기우, 박소순, 안석환 (2003b). 'STS316L용접재의 표면파에 의한 잔류응력 측정과 균열진전시의 음향방출특성', 한국해양공학회지, 제17권 제1호, pp 47-54 |