• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.177-178
• /
• 2004

The study will focus on an exploration of a variety of perspectives drawing technique, which is the three-dimensional presentation measure. Through this course, student develop effective expression and introduction of their Interior Design. The contents of the course are as follows : 1. Comprehension of the perspective 2. Comprehension and practice of the 1point perspective 3. Comprehension and practice of the 2point perspective 4. Comprehension and practice of the axonomatrics 5. Practice of the drawing technique through visual note

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1596-1606
• /
• 2006

There has been more increased the development of 3D technique since many 3D contents of 3D graphic model, 3D mobile/computer game, and 3D CAD have been serviced in Web or industry fields. Therefore, the watermarking system is more required to protect the copyright for 3D contents. Currently there has been researched about the watermarking for 3D graphic model of mesh or NURBS. However, watermarking technique based on CAD design drawing leaves something to be desired yet. This paper proposed the watermarking technique for 3D CAD design drawing using Line and Arc components. After drawing out Line and Arc components from designed drawing, we embed the watermark into both the length of Line component and the radius of Arc component. Experimental results verified that the proposed algorithm satisfies the transparency about watermarked drawing and also has the robustness against several attacks by using public CAD tool.

• 소성∙가공
• /
• 제10권3호
• /
• pp.253-260
• /
• 2001

This study was performed to investigate the optimized warm forming conditions which gave the maximum drawing depth in square cup drawing of clad sheet metals, by changing the temperatures of die and blankholder and also shapes and materials of blanks. Two kinds of clad sheet metals, STS304-A1050-STS304 and STS304-A1050-STS430 were selected for experiments. The relative drawing depth of STS304-A1050-STS304 clad sheet was increased up to 4.4 at $150^{\circ}C$ that was 29% higher than at room temperature, whereas STS304-A1050-STS430 material was improved to 3.9 at $120^{\circ}C$ which was 15% better than at room temperature. In addition, comparison of wall thickness and hardness of a warm drawn cup with those of room temperature showed more even distributions. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant test and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• 복식문화연구
• /
• 제28권4호
• /
• pp.508-526
• /
• 2020

This study has established a fashion illustration education plan using the contour drawing that fosters observational ability and enables creative drawing. This study developed two illustration curriculum proposals consisting of 15 weeks, combining literature and case studies. The researchers organized a step-by-step teaching plan that utilizes contour drawing according to the three stages of fashion illustration classes: foundation courses, general courses, and intensive courses. When the contour drawing is used at the beginning stage of the foundation courses of fashion illustration, it can be used as a technique to reduce the fear of students about practical skills, induce interest in illustration, and cultivate observation ability about objects. In general process, it is combined with various tools and coloring materials to strengthen expression power, and it is possible to produce detailed expressions and illustrations about human body and clothing. In intensive courses, it is expanded to the production of creative works with new aesthetics through digital techniques and mixed materials. As such, the contour drawing is expanded in various ways according to the learning contents and goals of each step, and is flexibly adjusted according to the learning content. Contour drawing has the effect of acquiring observation and expression ability, and it is analyzed as a technique that enables the production of creative illustration of students.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.136-143
• /
• 2002

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• 소성∙가공
• /
• 제15권2호
• /
• pp.148-152
• /
• 2006

In this study, the experiments of warm deep drawing were done with heated die, and with heated die, and blankholder, and cooled punch in order to investigate the formability of AZ31 magnesium alloy sheet in warm deep drawing. For this, warm deep drawing experiments were executed under various temperatures and punch velocities. The results of warm deep drawing with heated die showed that fracture occurred around the punch part at punch velocity of 75mm/min and punch stroke of 10mm under temperature range of 373-523K, but did not occur under temperature range of 548-673K even punch stroke of 25mm. And fracture at the punch stroke of 25mm and the temperature of 523K did not occur under the punch velocity of 30mm/min, but occurred under punch velocity of 75 and 125mm/min. Also warm deep drawing with heated die and blankholder, and cooled punch showed that the temperature range happening maximum height under punch velocity of 10-100mm/min was around 498-523K. Finally, with heating and cooling technique necking of AZ31 magnesium alloy occurred at punch shoulder part under the temperature range of 293-423K, but at die wall part under the temperature range of 473-573K.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.78-84
• /
• 2006

The objective of this study is to design the optimal die profile that can prevent material fracture in the tube drawing process for automobile steering input shaft. First, the CDV(Critical Damage Value) of material is obtained by the compression test and FE-analysis. The occurrence of fracture is estimated by the FE-analysis considering the CDV. In order to achieve the objective of this study, optimization technique and FE-analysis are applied. FPS(Flexible Polyhedron Search) method, which is one of the non-gradient optimization techniques often used in engineering, is used to search optimal die profile. The drawing die profile is represented by Bezier-curve to generate all the possible die profile. Using FPS method and FE-analysis the optimal drawing die profile is determined. To verify tile effectiveness of the redesigned optimal die, the tube drawing experiment is performed. In the experimental result, it is possible to produce sound product without material fracture using the redesigned optimal die.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.236-239
• /
• 2009

Cowl cross bar, a component of automotive cockpit module, has been manufactured by using welding processes of several tube parts with different diameters. However, in order to reduce costs and increase the quality, it is required to develop a new production method to manufacture the cowl cross bar as one-piece In this study, therefore, eliminating the welding process, tube drawing process which is one of metal forming processes was designed by using combined drawing technique. In addition, the selectable range of area reduction ratio was defined as a design guideline and the designed process sequence was verified by finite element analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.459-460
• /
• 2012

• 한국콘텐츠학회논문지
• /
• 제10권2호
• /
• pp.130-137
• /
• 2010

Light Drawing은 사진 촬영 기법 중 하나로, 어두운 방이나 밤에 빛이 나는 물체의 움직임을 노출 기법을 이용하여 촬영 한 것이다[1]. 사용자가 Light Drawing을 만들려 한다면 장 노출 카메라가 필요하고, 어두운 환경이 필요함으로 제한사항이 따르며 사용자는 3차원 공간에 그림을 그리는 것에 어려움을 느낀다. 반면에 포토�斌� 같은 컴퓨터 드로잉 툴을 사용하여 Light Drawing 효과를 낼 수 있다. 그러나 마우스나, 타블렛과 같은 입력 장치는 실제로 그림을 그리는 행위와 차이가 나기에 사용자들의 흥미를 반감시킨다. 본 논문에서는 Light Drawing을 손쉽게 제작 가능한 디지털 컨텐츠를 제안한다. 스테레오 비전을 이용하여 빛의 3차원 위치 정보를 계산하고 Drawing Effect를 이용하여 3차원 가상 공간에 Light Drawing을 구현하였다.