Journal of Fisheries and Marine Sciences Education
/
v.24
no.4
/
pp.494-506
/
2012
The purpose of this study was to analyse 3, 4, 5-year-old children's private speech according to their age and task characteristics (structured task vs. unstructured task). In order to achieve the goal, the main effect of age, characteristic of tasks and interaction effect were considered among age and characteristic of tasks on preschool children's private speech. The subjects were each 30 3, 4, 5-year-olds from preschool in Busan, South Korea. The structured task was puzzle task and the unstructured task was drawing task from TCT-DP. The data was analyzed by repeated measurement two way ANOVA: 3(age) ${\times}$ 2((characteristic of task). As a result, firstly, total private speech of 4-year-old was higher than 3-year-old, 5-year-old in both tasks, and total private speech of 5-year-old was higher than 3-year-old in both tasks. Secondly, the task-irrelevant private speech was not affected by main effect of age and characteristic of task and interaction effect between age and characteristic of task. Thirdly, the task-relevant private speech was received both main effects and interaction effects between age and characteristic of task. Finally, the external manifestation of inner speech were not received effect of age but received effect of characteristic of task, and received interaction effect between age and characteristic of task. The results of this study imply that characteristic of task is an important factor inducing children's private speech.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2003.10a
/
pp.301-301
/
2003
In current study, Nanocomposites are reinforced with carbon nanofiber, carbon nanotube and SiC, etc. Since the nano reinforcements have the excellent mechanical, thermal and electrical properties compared with that of existing composites, it has lately attracted considerable attention in the various areas. Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties. Until now, strengthening of the copper alloy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the alloy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conducting material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the cooer matrix composites of high strength and electric conductivity. In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process and align mechanism as well as optimized drawing process parameter are verified via numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of 10∼20$\mu\textrm{m}$ in length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper. it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber Optimal parameter for drawing process was obtained by analytical and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc. The lower drawing angles and lower reduction areas provides the less rupture of co tube is noticed during the drawing process and the better alignment of carbon nanofiber is obtained.
Identification of forming limits of sheet metals is an important task to be done before the sheet metal forming processes. The information of the forming limit is indispensable for design of deformed shapes and related forming processes. This procedure becomes more important than ever as the auto-body becomes complicated and the number of auto-body parts is reduced for lower production cost. To identify the forming limit of sheet metals stretching with a hemispherical punch has gained popularity because of the convenient experimental procedure. The stretching experiment however has localized deformation or the shear band is originated from the non-unifrom deformation in the critical circum-stance instead of the absolute criterion. More accurate information of the forming limit therefore could be obtained by a more appropriate experiment to the real process. In this papaer an experiment program is devised to practivally identify the forming limits of sheet metals for auto-body parts. The experiment program contains not only stretching but deep-drawing Both forming experiments use the same hemispherical punch while they use different specimens. Deep-drawing experiments use speci-mens cut out in circular arc on both sides of circular blank to make it torn during the deep-drawing They also use speciments cut out straight in one side of a circular blank to make it deformed unevenly which causes local deformation during the deep-drawing. The experimental result demonstrates that the forming limit diagrams in the two cases show difference in their effective magnitude. The forming limit curve from deep-drawing is located lower than that from stretching. It is noted from the result that the deep-drawing process causes acceleration of localized deformation in comparison with the stretching process. From the experimental result the maximum value of forming limit could be pre-dicted for safe design.
This study propose the educational potential of an activity that solves the task of one-stroke drawing of complex figures using a drag-and-drop type educational programming language such as Scratch. The problem of determining whether a given shape is capable of one-stroke drawing is a separate problem from actually finding the path of one-stroke drawing and implementing it through programming. In particular, finding a path that allows one-stroke drawing of complex shapes with regularity and implementing it through programming requires problem-solving capabilities based on the convergence of various mathematical knowledge. Accordingly, in this study, problems related to one-stroke drawing concerning polygon-related shapes, tessellation-related shapes, and fractal shapes were presented, and the results of one-stroke drawing programming of the shapes were exemplified. In addition, the mathematical knowledge and computational thinking elements necessary for the solution of the illustrated problem were analyzed. This study is significant as a new example of the mathematics education that combines mathematics and information.
The Journal of Korean Academy of Sensory Integration
/
v.19
no.2
/
pp.36-45
/
2021
Purpose : This study aims to identify changes in the visuomotor coordination and fine motor coordination functions caused by the use of a task-oriented intervention in a child with developmental delay. Methods : The participant, who was a 6-year-old girl, was not diagnosed but showed a developmental delay in overall function. The study period was February 5, 2021, to June 4, 2021, and a single-subject A-B study design was used. The baseline (A) was initially evaluated in the first three sessions to identify the child's functions. In the intervention period, 12 session (B), task-oriented intervention was applied; the child engaged in many of the activities in kindergarten, such as painting, writing, making, and cutting with scissors. Visuomotor coordination and fine motor coordination were equally measured during the baseline and intervention periods. Visuomotor coordination was measured via drawing of an oval according to the Korean Developmental Test of Visual Perception 3 (K-DTVP-3), and fine motor coordination was assessed using the finger-nose touching item of the Clinical Observation of Motor and Postural Skills (COMPS). Results : The mean of the baseline of the K-DTVP-3 oval drawing was 23, and the mean of the intervention period was 39.66. The mean of the baseline of the COMPS finger-nose touching was 0, and the mean of the intervention period was 5.08. Conclusion : Task-oriented intervention seems to have a positive effect on the visuomotor coordination and fine motor coordination abilities of children with developmental delay.
Journal of Fisheries and Marine Sciences Education
/
v.19
no.2
/
pp.219-228
/
2007
The purpose of this study is to analyze the job and develops the educational training program of ship-fitter by using the DACUM (Developing A Curriculum) method. On the first stage, the authors have been defined the job and classified duties and tasks of ship-fitters. To fine what is the most efficient task for ship-fitter, we have been investigated the levels of importance, difficulty, frequency and entry in each task. A DACUM committee is composed of total 10 members, which are one facilitator, eight panel members, one recorder & coordinator to analyze the job of ship-fitter. Following is the result of this study. First, 5 duties and 28 tasks are analyzed. Second, 19 tasks that are essential in entry level of occupation containing 'drawing inspecting' are identified. Third, a job model of ship-fitter is constructed by the results of DACUM job analysis. Fourth, training program is developed. This program contains task/curriculum Matrix, task/Course Matrix, training Course Profile, training Road Map.
Kim, Yoo-Gue;Yang, Woo-Ryeong;Kim, Ha-Ryong;Yang, Hoe-Chang
The Journal of Economics, Marketing and Management
/
v.5
no.1
/
pp.21-26
/
2017
Purpose - This study extracts performance-reward factors based on the previous studies related to Herzberg's two-factor theory and performance-reward and proposes a research method to identify how these factors have an influence on task performance directly related to production performance and contextual performance that has an indirect influence. Research Design, Data, and Methodology - This study draws performance-reward factors through Focus Group Interview(FGI), classifies them into economic/uneconomic and direct/indirect factors, draws maintenance/improvement factors and unnecessary ones through IPA, and maximizes the effectiveness of performance-reward factors. Results - It also identifies how performance-reward factors have an influence on internal and external motives based on previous studies, classifies performance-reward factors into task performance and contextual performance and identifies the influence relationship between these, and proposes a research model to identify the roles of equity sensitivity based on equity theory. Conclusion - The findings from this study are expected to lay the groundwork for drawing various methods to reduce the turnover rate of employees and be important resources for reinforcing the competitiveness of businesses by classifying the performance -reward factors that may cause internal and external motives from the small and medium-sized manufacturing perspective and presenting methods to identify if these have an influence on task performance and contextual performance.
Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.
This study evaluated attachment representation of school aged children, its relation to classification of family drawings, and their association with children's perceptions about families. The attachment representation of 43 children 6-9 years of age was evaluated by the Manchester Attachment Story Task (Green, Stanley, & Goldwyn, 2003) children's family drawings were classified by Fury's Family Drawing Scales (1996). Results showed that 12 children (28%) were avoidant, 23 (54%) secure, 4 (9%) resistant, and 4 (9%) were disorganized. Classification of childhood attachment representation showed a high concordance rate (86%) with family drawings. Securely Attached children showed positive perceptions such as family pride/happiness and vitality/creativity while Insecure children showed negative perceptions like emotional distance, tension and bizarreness.
Journal of the Korean Society for Precision Engineering
/
v.10
no.4
/
pp.180-189
/
1993
In CAD/CAM system, it is required to produce manufacturing information from the deawing output of design system. The most difficult task is to formulate 3-dimentional modeling information utilizing 2-dimentional data. This paper addresses the automatic converting steps of 2-dimentional drawing data to 3-dimentional solid modeling using feature recognition rules as an expert shell. With the standardization of design process and recognition rule as a fundamental steps, the developed system shows a good application tool which can interface the design and manufacturing stage in CAD/CAM system of PC level.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.