• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.1
• /
• pp.23-32
• /
• 2011

Recently, with the advent of high risk infectious agent such as the Ebola virus, SARS, special research facilities dealing with such dangerous pathogenic are drawing attention gradually. Especially, this kind of facilities can be called BL4(Biosafety Level 4) facility. At the moment, Korean government is going to construct BL4 institute in order to handle efficiently such kind of pathogen. However, there are no proper design guidelines for BL4 facility. This paper proposes circulation system of BL4 facility on the basis of analysis of existing BL4 guidelines of Canada, and Korean BL3 facilities. The outcomes of this study are as follows. At first, functional areas of BL4 facilities have been divided into three categories according to the hazard level ; dangerous area, transitional area, and ordinary area. Secondly, circulation system of BL4 facility has been explored as a form of diagram according to the circulating subjects. These include human, laboratory animals, hazardous pathogen, equipments and cloth. This study has some limitations in that it lacks empirical evidences and concrete SOPs(Standard Operating Procedure). Despite of some weaknesses, it is expected to give some preliminary guidelines for the design of circulation system in BL4 facilities.

• Information Systems Review
• /
• v.15 no.2
• /
• pp.21-40
• /
• 2013

Because of the recent development of information technology, especially the popularization of social media, false rumors and abusive comments on social media have increased, which has accelerated conflicts in online society. Since these conflicts lead to significant negative influences on online society, it is important to figure out how to cope with the conflicts and integrate the society. Thus, this study provides effective political implications that will advance the society where people can communicate based on trust in social media. In addition, we suggest new sociocultural change phenomenon and social integration by drawing the Causal Loop Diagram focusing on the dimension of social capital in social media environment.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1851-1859
• /
• 2022

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

• Journal of Elementary Mathematics Education in Korea
• /
• v.9 no.2
• /
• pp.85-110
• /
• 2005

The purpose of this study is to examine the characteristics of visual representation used in problem solving process and examine the representation types the students used to successfully solve the problem and focus on systematizing the visual representation method using the condition students suggest in the problems. To achieve the goal of this study, following questions have been raised. (1) what characteristic does the representation the elementary school students used in the process of solving a math problem possess? (2) what types of representation did students use in order to successfully solve elementary math problem? 240 4th graders attending J Elementary School located in Seoul participated in this study. Qualitative methodology was used for data analysis, and the analysis suggested representation method the students use in problem solving process and then suggested the representation that can successfully solve five different problems. The results of the study as follow. First, the students are not familiar with representing with various methods in the problem solving process. Students tend to solve the problem using equations rather than drawing a diagram when they can not find a word that gives a hint to draw a diagram. The method students used to restate the problem was mostly rewriting the problem, and they could not utilize a table that is essential in solving the problem. Thus, various errors were found. Students did not simplify the complicated problem to find the pattern to solve the problem. Second, the image and strategy created as the problem was read and the affected greatly in solving the problem. The first image created as the problem was read made students to draw different diagram and make them choose different strategies. The study showed the importance of first image by most of the students who do not pass the trial and error step and use the strategy they chose first. Third, the students who successfully solved the problems do not solely depend on the equation but put them in the form which information are decoded. They do not write difficult equation that they can not solve, but put them into a simplified equation that know to solve the problem. On fraction problems, they draw a diagram to solve the problem without calculation, Fourth, the students who. successfully solved the problem drew clear diagram that can be understood with intuition. By representing visually, unnecessary information were omitted and used simple image were drawn using symbol or lines, and to clarify the relationship between the information, numeric explanation was added. In addition, they restricted use of complicated motion line and dividing line, proper noun in the word problems were not changed into abbreviation or symbols to clearly restate the problem. Adding additional information was useful source in solving the problem.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2020

This research examines pattern production of 3 men's costumes in the second half of 19th century by 3D reconstruction to reveal technical aspects of mail costumes. The steps are as follows. First, an examination of selective type according to research study. Second, a pattern analysis of 3 historical male tops of 19th century referred to 9 pattern books of the France National Library collection. Third, a categorized type analysis that referred to paintings of the Musée d'Orsay collection. Fourth, a measurement and structure research of 3 historical garments of Fashion and Textile Museum collection. Fifth, the pattern making and fitting by 3D simulation. Research discussed the following subjects and results. First, main type of men's coat can be categorized by frac, redingote, jaquette, and veston. Second, the male costume pattern contained in pattern books was researched along with distinguished silhouettes and structures; X silhouette for frac and redingote, H silhouette for jaquette, and straight box silhouette for veston. Third, based on the analysis of representative type of men's costume per period conducted previous studies, 2 redingotes and a jaquette in the museum were selected and compared to other data such as image materials. Last, the following process was conducted for reconstruction; 'Drawing diagram-Primary pattern drafting by measurement value-3D virtual fitting-Checking the fit-Modification and complement'. We also obtained a 3D virtual reconstruction and a 2D research pattern that suggested a costume pattern by each type along with 3D reconstruction that included insights for male coat techniques of 19th century France.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.143-154
• /
• 2014

For the purpose of drawing a representative type of utilizing idle farmlands, this study collected and analyzed newspaper articles about cases of utilizing idle farmlands in the past decade using Internet search engines. Prior to this, it clarified a concept of idle farmlands to raise accuracy of searching articles, and selected NAVER as a search engine. It set "idle farmland", "abandoned land", and "utilizing" as basic search words in search option, and also set search period from 1st of January in 2004 to 31st of December in 2013. This study primarily searched 1,593 articles, and extracted 165 articles excluding overlapped and unrelated articles. Furthermore, it investigated extracted articles by date, media, headline, content of use, region(province), particular area(city and country), main agent, item and keyword 1, 2, 3 for proper use. This study also examined frequencies by year according to indoor and outdoor environment as well as regional differences through frequencies by regional groups and chronology. Furthermore, it drew a diagram of frequency flow of keyword 2, 3 with each keyword 1 as the central figure in order to draw various types of using idle farmlands. Through the diagrams, this study drew 9 using types such as (1) community service. agriculture type, (2) high income. agriculture type, (3) sightseeing. landscape. agriculture type, (4) livestock. agriculture type, (5) weekend farm type, (6) high income. woodland type, (7) ecology. landscape. woodland type, (8) agricultural work-study type, (9) ecological environment type.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.48.1-48.1
• /
• 2012

We present the ultraviolet (UV) color-color relation of early-type galaxies (ETGs) in the nearby universe (0.05 < z < 0.12) to investigate the properties of hot stellar populations responsible for the UV excess (UVX). The initial sample of ETGs is selected by the spectroscopic redshift and the morphology parameter from the SDSS DR 7, and then cross-matched with the GALEX far-UV (FUV) and near-UV (NUV) GR6 data. The cross-matched ETG sample is further classified by their emission line characteristics in the optical spectra into quiescent, star-forming, and active galactic nucleus categories. Contaminations from early-type spiral galaxies, mergers, and morphologically disturbed galaxies are removed by visual inspection. By drawing the FUV-NUV (as a measure of UV spectral shape) versus FUV-r (as a measure of UVX strength) diagram for the final sample of -3700 quiescent ETGs, we find that the "old and dead" ETGs consist of a well-defined sequence in UV colors, the "UV red sequence," so that the stronger UVX galaxies should have a harder UV spectral shape systematically. However, the observed UV spectral slope is too steep to be reproduced by the canonical stellar population models in which the UV flux is mainly controlled by age or metallicity parameters. Moreover, 2 mag of color spreads both in FUV-NUV and FUV-r appear to be ubiquitous among any subsets in distance or luminosity. This implies that the UVX in ETGs could be driven by yet another parameter which might be even more influential than age or metallicity.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.121-134
• /
• 2017

With rapid increasing the development and use of IoT Devices, requirements for safe IoT devices and services such as reliability, security are also increasing. In Security engineering, SDLC (Secure Development Life Cycle) is applied to make the trustworthy system. Secure Development Life Cycle has 4 big steps, Security requirements, Design, Implementation and Operation and each step has own goals and activities. Deriving security requirements, the first step of SDLC, must be accurate and objective because it affect the rest of the SDLC. For accurate and objective security requirements, Threat modeling is used. And the results of the threat modeling can satisfy the completeness of scope of analysis and the traceability of threats. In many countries, academic and IT company, a lot of researches about drawing security requirements systematically are being done. But in domestic, awareness and researches about deriving security requirements systematically are lacking. So in this paper, I described about method and process to drawing security requirements systematically by using threat modeling including DFD, STRIDE, Attack Library and Attack Tree. And also security requirements are described via Common Criteria for delivering objective meaning and broad use of them.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.315-324
• /
• 2004

In eddy current testing(ECT), differential probes have been frequently used since they .an reduce the number of parameters that influence ECT signals. However, differential signal is actually the difference of the two coils' impedance so that signal prediction and interpretation are not easy, On the other hand, absolute coil signal is rather straightforward to predict and analyze. Therefore, combined use of the two types of signals would increase the test reliability. In this paper, absolute coil signals from Inconel plate and tubes are predicted by the finite element analysis and efforts of lift-off, fill-factor, conductivity, operating frequency, test specimen thickness, inner diameter defects, and outer diameter defects are investigated. As a result, various impedance plane diagrams are drawn and analyzed. Significant practical knowldege about absolute signals is accumulated and similar characteristics of the two types of signal could be understood. Finally, slope angle versus defect depth calibration corves are prepared for three different frequencies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1027-1033
• /
• 2011

A VCM sheet is a metal sheet on which PET/PVC is coated for outer panels of home appliances. The purpose of this study is to obtain methods for suppressing PET tearing that occurs during the press forming of the VCM sheet. In order to identity the factors that minimize PET tearing, an FE analysis was performed. The occurrence of PET tearing cannot be predicted using the conventional forming limit diagram. PET is torn by friction between a die and sheet, which is caused by the thickening of material at a die corner. To reduce the thickening of material, the blank shape was re-designed and the thickened material at a flange was removed by a trimming process. The results of the FE-analysis involving modified process parameters showed that the thickness of the product at a die corner is distributed within the clearance of drawing and flangeforming process. A forming experiment was conducted to verify the proposed process parameters. A good final product was obtained without PET tearing of the VCM sheet.