• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.561-564
• /
• 2002

For the reduction of fuel consumption of high speed, the aerodynamic drag must be reduced. In early vehicle design process, it is very important to have information about aerodynamic characteristics of design models. In this phase CFD methods are usually used to predict the aerodynamic forces. But commercial programs using turbulence models cannot give a good agreement with experimental result and have also problems with convergence. PowerFLOW employs a new technology called DIGITAL PHYSICS, which provides a different approach to simulating fluids. DIGITAL PHYSICS uses a lattice-based approach (extended from lattice-gas and lattice-Boltzmann methods) where time, space and velocity are discrete. This discrete system represents the Wavier-Stokes continuum behavior without the numerical instability Issues of traditional CFD solvers, such as convergence. In this paper, aerodynamic performance of vehicles are simulated using PowerFLOW by Exa and results are compared with experimental wind tunnel data.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1084-1092
• /
• 2006

Shape optimization of airfoil in WIG craft has been performed by considering the ground effect. The WIG craft should satisfy various aerodynamic characteristics such as lift, lift to drag ratio, and static height stability. However, they show a strong trade-off phenomenon so that it is difficult to satisfy aerodynamic properties simultaneously. Optimization is carried out through the multi-objective genetic algorithm. A multi-objective optimization means that each objective is considered separately instead of weighting. Due to the trade-off, pareto sets and non-dominated solutions can be obtained instead of the unique solution. NACA0015 airfoil is considered as a baseline model, shapes of airfoil are parameterized and rebuilt with four-Bezier curves. There are eighteen design variables and three objective functions. The range of design variables and their resolutions are two primary keys for the successful optimization. By two preliminary optimizations, the variation can be reduced effectively. After thirty evolutions, the non-dominated pareto individuals of twenty seven are obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.52-58
• /
• 2019

Due to icing and snow, power transmission lines have asymmetric cross sections, and their motion becomes unstable. At this time, the vibration caused by the wind is called galloping. If galloping is continuous, short circuits or ground faults may occur. It is possible to prevent galloping by installing spacers between transmission lines. In this study, the transmission line is modeled as a mass-spring-damper system by using RecurDyn. To analyze the dynamic behavior of the transmission line, the damping coefficient is derived from the free vibration test of the transmission line and Rayleigh damping theory. The drag and lift coefficient for modeling the wind load are calculated from the flow analysis by using ANSYS Fluent. Galloping simulations according to spacer stiffness and interval are carried out. It is found that when the stiffness is 100 N/m and the interval around the support is dense, the galloping phenomenon is reduced the most.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.1-7
• /
• 2003

익형에 대한 공력 최적설계 프로그램을 개발하였으며, 점성 유동장에 대한 보다 정확한 정보를 설계에 반영하기 위하여 나비어-스톡스 방정식을 사용하였다. 최적설계 방법으로는 민감도 해석을 위하여 수정유용방향탐색방법(Modified Method of Feasible Directions, MMFD)을 사용하였으며 이동거리 계산을 위하여 다항식 보간법을 사용하였다. 또한 설계시간을 단축하기 위하여 MPI를 사용하여 병렬화하였다. 전체 유동장을 8개의 영역으로 분할하였으며 분할된 영역은 지정된 프로세서에 할당하여 계산을 수행하였다. 민감도 계산을 위하여 각 프로세서에 할당하여 계산을 수행하였다. 민감도 계산을 위하여 각 프로세서에 각 탐색방향을 할당하여 민감도를 병렬계산하였다. 본 연구의 수행 결과 양력은 허용한도 내의 일정한 값을 유지하는 가운데 항력이 감소된 최적화된 익형의 형상을 설계할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.170-170
• /
• 2010

The energy conversion from the temperature difference between hot and cold source like ocean thermal energy conversion (OTEC), requires a long and large-diameter pipe (about 1000 to 10,000 meters long) to reach the deep water. The pipe diameter ranges from 2.8 meter for proposed early test systems, to 5 meter for large, commercial power generation systems. The pipe must be designed to resist collapsing pressures produced by water temperature and density differences, and the reduced pressure required to induce flow up the pipe. Other design considerations include the external-drag effect on the pipe due to ocean currents, and the wave-induced motions of the platform to which the pipe is attached. Various approaches to the pipe construction have been proposed, including aluminum, steel, concrete, and fiberglass. More recently, a flexible pipe construction involving the use of fiberglass reinforced plastic has been proposed. This report presents the results of a scaled fixed cold water pipe (CWP) model test program performed by EES(Engineering Equation Solver) to demonstrate the feasibility of this pipe approach.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.13-21
• /
• 1995

On mini-bus with diesel engine, at idle rpm for taking measurement to reduce gear rattle noise, was tested by the three clutch disc samples by turns, then measured the fluctuation of revolution of engine & transmission and parallel vibration of differential gear & transmission. By analyzing the measured data, the gear rattle noise, the matching design and tuning technic of transmission are comprehended and established. Conclusions of this test are as follows ; (1) Fluctuation of revolution on transmission is greatly affected by torsion of clutch disc according to fluctuation of engine revolution transmit to transmission through clutch system. Especially, gear rattle noise can be reduced by minimaizing the fluctuation of the revolution of transmission using pre-damper type clutch disc. (2) The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. So, it is necessary for manufacturer to choose proper oil to transmission. (3) It can be occurred jumping and crash noise by applying the pre-damper type clutch disc for reducing the gear rattle noise. So, it is necessary to do test with actual vehicle according to test procedure.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.79-82
• /
• 2003

An aquaculture system for feeding the caged fishes in the open water is suggested for ocean application. Survival and operation conditions are defined at the conceptual design. Wave and current drag forces are discussed to determine the proper dimension of the aquaculture system and the related mooring system. Second order wave drift force at the survival condition is the dominant force, which be reduced by minimizing the superstructure open to the surface. Automation in feeding, sorting, cleaning is introduced to use the ongoing technology for quality product. The suggested system has advantage compared to onshore culturing, but not to shallow water culturing system. There is room for real application in future by the countries, such as Korea and Japan, which are in short of fish supply and have willingness to venture towards the ocean aquaculture.

• Journal of Astronomy and Space Sciences
• /
• 제40권1호
• /
• pp.35-44
• /
• 2023

Surveillance and reconnaissance intelligence in the space domain will become increasingly important in future battlefield environments. Moreover, to assimilate the military provocations and trends of hostile countries, imagery intelligence of the highest possible resolution is required. There are many methods for improving the resolution of optical satellites when observing the ground, such as designing satellite optical systems with a larger diameter and lowering the operating altitude. In this paper, we propose a method for improving ground observation resolution by using an optical system for a previously designed low orbit satellite and lowering the operating altitude of the satellite. When the altitude of a satellite is reduced in a circular orbit, a large amount of thrust fuel is required to maintain altitude because the satellite's altitude can decrease rapidly due to atmospheric drag. However, by using the critical inclination, which can fix the position of the perigee in an elliptical orbit to the observation area, the operating altitude of the satellite can be reduced using less fuel compared to a circular orbit. This method makes it possible to obtain a similar observational resolution of a medium-sized satellite with the same weight and volume as a small satellite. In addition, this method has the advantage of reducing development and launch costs to that of a small-sized satellite. As a result, we designed an elliptical orbit. The perigee of the orbit is 300 km, the apogee is 8,366.52 km, and the critical inclination is 116.56°. This orbit remains at its lowest altitude to the Korean peninsula constantly with much less orbit maintenance fuel compared to the 300 km circular orbit.

• 복식
• /
• 제57권4호
• /
• pp.173-187
• /
• 2007

The purpose of this study is to analyze the fetishist characteristics and the aesthetic values of glamour style based on the premise that fetishism is the theoretical root of glamour style expressed in fashion throughout history. The following results are from analysing fetishist characteristics of glamour style. First, luxury was analysed from an angle of commodity fetishism. Every culture develops images and stories that portray a world in which its ideals are realized: a paradise, a utopia, a golden age, etc. Consumer goods often serve as 'bridges to these ideals'. People thus can fantasize about owning the perfect life. Crucially, however, they must never get everything they picture. That is why luxuries often take on displaced meaning. Glamour gives the displaced meaning visual form, making it beautiful and real. Second, the attention on the glamour of luxury goods as a bridge to ideals is connected to the glamour icon who is simultaneously a consumer of these luxury goods and a producer of cultural goods. Glamour icons including the courtesan of the late 19th century, the actress of the 1930s' Hollywood golden age and today's celebrities appear to efface the traces of production and create fetishist images in culture. Through this artificial principle, the commodity-cum-glamour icon comes to life as a splendid image of spectacle. Third, masquerade and seduction were analysed from an angle of sexual fetishism. A magnificent image of masquerade as sexual fetishism is often equated with femininity, especially in Hollywood movies, because the artificial seduction of the feminine -namely glamour- can be effected by the absence or silence of being. That is to say, the aesthetic revelation of femininity coincides with the fleshing out of artificial signs. Masquerade and the seduction of the feminine are connected with glamour's artificial sensuality from this point. Fourth, since 1980's when homosexuality as sexual deviation resurfaced as a hot topic, sexual ambiguity and bisexual image have gained attention as perverse sexuality. Next came queer theory, which reduced gender itself to a matter of surface rather than depth. According to queer theory, gender itself can be revealed as a kind of drag act. Drag's imitative performance may reveal that womanliness is just about 'dragging up'. Queerness as a decadent play makes a connection with the wicked origins of glamour. From these characteristics, four aesthetic values were deduced: ostentatious luxury and mysterious idolatry by commodity fetishism, artificial sensuality and playful queerness by sexual fetishism.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.1-7
• /
• 1999

본 논문에서는 충주호에서 유람선으로 사용되고 있는 광폭천흘수형 선박을 대상으로 선정하고, 공기를 공급하여 선저에 공동을 형성시켜 마찰저항을 감소시킬 수 있도록 선박의 선저형상을 개량하였다. 2차원 공동문제로 이상화하여 선저에 부착되는 공동을 이론적 방법으로 수치해석하여 공기공동의 형상과 내부압력을 추정하였고 공동현상을 지배하는 무차원수를 살펴보았다. 예인수조에서 모형선실험을 시행하고 단의 높이변화, 선측의 공기유출막이벽 등에 의한 공기공동의 형성과 저항감소효과를 조사하였다. 또한 투명한 아크릴로 제작된 선저부를 통해, 선저에 부착되는 공기공동의 발달과정을 관측하였다. 이러한 연구를 통하여, 실선선형의 선저부 형상을 적절히 개량하고 공기를 공급함으로써 설계속도 부근에서 원래선형의 전저항의 25%정도를 줄일 수 있음을 모형선에서 확인하였다.