• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.34-34
• /
• 1987

Investigation has been carried out on the physical properties of several cotton rovings in various drafting conditions, such as twist, draft ratio and roller gauge. Drafting force and tensile strength were measured and analyzed by the statistical method like 3 factorial design. The correlations between drafting force and tensile strength were also examined. It was known that all factors effected on the drafting force and tensile strength of rovings. But the linear and quadratic effect of factors were found different results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1271-1284
• /
• 2011

This study improves the fitness of Air Force winter service uniforms through the development of a shirt pattern drafting method and automatic pattern drafting program for MTM production. A calculation formula is formed through a correlation analysis and regression analysis using Size Korea 2004 3D measurement data after analyzing 4 kinds of existing shirt pattern drafting methods and 3 types of shirt patterns currently used for the Air Force service uniform. The results of this study are as follows: The developed pattern drafting method has 4 parts that use calculated dimensions: neck base width, front interscye, back interscye and scye depth. Other body measuring parts that have a high correlation with calculation parts are inserted into regression analysis as independent variables to create dimension calculation formulas. The result of the final study patterns were better than existing winter service uniforms in nearly all items for the appearance evaluation and motion adaptability evaluations. The method was converted into an automatic pattern drafting program using C++ after the completion of pattern drafting method development.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.256-267
• /
• 2013

This study is conducted to improve the fitness of Air Force winter service uniforms pants through the development of a pants pattern drafting method and automatic pattern drafting program for mass customization. The initial study pattern drafting method is formed through an analyses of 4 kinds of conventional pants pattern drafting methods for education and 3 kinds of conventional pants patterns of Air Force apparels. The initial study pattern drafting method is converted into the final study pattern drafting method after twice conducting a wearing test. To verify the final study pants pattern, a motion adaptability evaluation, an ease amount evaluation and an appearance evaluation are conducted. The results of the final study patterns were better than conventional winter service uniforms in the motion adaptability evaluation and the appearance evaluation. However, the results show similar values between the final study patterns and conventional winter service uniform patterns in the ease amount evaluation. An automatic pattern drafting program was developed based on the final study pattern drafting method. The program allowed the achievement of customized pants patterns through the placement of customer body sizes into the size input window. It also provided two kinds of ease amount and two kinds of waist belt level options.

• Wind and Structures
• /
• v.37 no.2
• /
• pp.79-94
• /
• 2023

This paper traces the drafting of the new EN 1991-1-4 Eurocode 1 - Actions on structures - Part 1-4: General actions - Wind actions within Mandate M/515 of the European Commission to CEN, for the evolution of structural Eurocodes towards their Second Generation. Work of the Project Team started in August 2017 and ended in April 2020, with delivery of a final draft for public enquiry. The revised document contains several modifications with respect to the existing 2005 version, and new sections were added, covering aspect not dealt with in the previous version. It has a renovated structure, with a main text limited in size and containing only fundamental material; all the remaining information, either normative or informative is arranged into thirteen annexes. Common to other Eurocode Parts, general requests from CEN were those of reducing the number of Nationally Determined Parameters and of enhancing the ease of use. More specific requests were those of (a) the drafting of a European design wind map, (b) improving wind models, (c) reviewing force and pressure coefficients, (d) reviewing the procedures for evaluation of the dynamic response, as well as (e) making editorial improvements aimed at a more user friendly document. The author had the privilege to serve as Project Team member for the drafting of the new document, and this paper brings his personal view concerning some general aspects of wind code writing, and some more specific aspects about the particular document.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.163-166
• /
• 2001

최적의 사 균제도를 갖는 방적사를 제조하기 위해서는 슬라이버나 조사와 같은 섬유집합체가 어떤 일정 수준의 섬유응집력 및 드래프트 특성을 가져야 하는 것으로 알려져 있다. 드래프트 힘이 어느 정도 올라가면 정적마찰력을 극복한 가속된 섬유와 아직 가속되지 않은 섬유간의 상태가 계속해서 변화하게 되는데, 이와 같이 정적상태에서 동적상태로 전환됨에 따라 사 균제도에도 그에 상응하는 영향을 미치게 된다. (중략)

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.116-122
• /
• 2020

Human and material resource planning is one representative example of Operations Research. Resource planning is important not only in civilian settings but also in military ones. In the Air Force, flight scheduling is one of the primary issues that must be addressed by the personnel who are connected to flight missions. However, although the topic is of great importance, relatively few studies have attempted to resolve the problem on a scientific basis. Each flight squadron has its own scheduling officers who manually draw up the flight schedules each day. While mistakes may not occur while drafting schedules, officers may experience difficulties in systematically adjusting to them. To increase efficiency in this context, this study proposes a mathematical model based on a binary variable. This model automatically drafts flight schedules considering pilot's mission efficiency. Furthermore, it also recommends that schedules be drawn up monthly and updated weekly, rather than being drafted from scratch each day. This will enable easier control when taking the various relevant factors into account. The model incorporates several parameters, such as matching of the main pilots and co-pilots, turn around time, availability of pilots and aircraft, monthly requirements of each flight mission, and maximum/minimum number of sorties that would be flown per week. The optimal solution to this model demonstrated an average improvement of nearly 47% compared with other feasible solutions.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.85-92
• /
• 2006

It seems extremely incongruous that genocide, crimes against humanity and war crimes could ever be justified or excused by 'defensive force'- self-defence, defence of others and defence of property. Nonetheless, art 31(1)(c) of the Rome Statute of the International Criminal Court codifies defensive force as a ground for excluding criminal responsibility. This provision was controversial and extremely difficult to negotiate at the Rome Conference of 1998, largely due to the conceptual differences that exist in respect of criminal defences between the various domestic legal systems of the world. This paper analyses the drafting history and wording of art 31(1)(c) in order to clarify the precise scope of defensive force under the Rome Statute. It then seeks to ascertain the applicability of the provision to genocide, crimes against humanity and war crimes, and to thereby explore the nature of these crimes and the intended prosecutorial strategy of the International Criminal Court.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.12
• /
• pp.65-84
• /
• 1999

During the past few decades, we have witnessed three approaches to overcome the legal disparities between trading countries: - determining the individual governing law in accordance with the conflict of laws principle; - unifying and harmonizing private international law into uniform rules and substantive laws under the auspices of ICC, UNCITRAL, UNIDROIT and various NGOs ; and - drafting model laws like the UNCITRAL Model Law on Electronic Commerce and promoting member countries to enact them. Against this backdrop, the United Nations Convention on Contracts for the International Sale of Goods (CISG) and the process by which it was adopted, established the benchmark for the unification of commercial law. The CISG, completed in 1980, merged civil and common law concepts and came into force in 1988 after a certain number of countries endorsed the treaty. Besides the CISG, the U.N. Limitations Convention and the UNIDROIT Principles of International Commercial Law, to name a few, have attempted to set cross-border legal norms and standards in the international business transactions. However, since the advent of computer-based commerce, there have emerged all-out efforts to establish uniform rules before national legal systems have been developed. As a consequence, the Model Law on Electronic Commerce has become a specimen legislation covering functional equivalents of paper-based writing and signature. For the credit enhancement exemplified by the Uniform Rules for Demand Guarantees (ICC Publication No.458), the UNCITRAL prepared the U.N. Convention on Independent Guarantees and Stand-by Letters of Credit, which was adopted by the U.N. General Assembly in 1995 but remains still not effective as only two countries have ratified this treaty so far. In this connection, two draft conventions underway at UNIDROIT and UNCITRAL deserve our attention as the probability of unification in the Korean Peninsula is mounting. They are to create security interests for commercial finance in moveable equipment and accounts receivable. The UCC-type security rights are regarded to be useful to enable the North Koreans with limited properties to borrow from the banks.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.66
• /
• pp.119-148
• /
• 2015

Generally, the liability for breach is defined as the civil liability that arises from the conduct of violation of a contract. There are two notable principles governing liability for breach that have fundamental impacts on the unified Contract Law of the People's Republic of China (hereinafter Chinese Contract Law) in the remedies. In China, during the drafting of the Contract Law, there was a great debate as to whether damages for breach of contract ought to follow the fault principle or to follow the strict liability principle. Ultimately the Chinese Contract Law follows the model of the CISG on this point, namely, it follows the strict liability principle (article 107) with an exemption cause of force majeure. Under Chinese Contract Law, it is interpreted as strict liability in principle. Strict Liability is a notion introduced into Chinese Contract Law from the Anglo-Saxon Law. The strict liability or no fault doctrine, on the contrary, allows a party to claim damages if the other party fails to fulfill his contractual obligations regardless of the fault of the failing party. Pursuant to the strict liability doctrine, if the performance of a contract is due, any non-performance will constitute a breach and the fault on the party in breach is irrelevant. This paper reviews problems of legal character or legal ground of contractual liability in Chinese contract law. Specifically, focusing on the interpretation of Chinese contract law sections and analysis of three cases related contractual liability in freight agency, the paper proposes some implications of structural features of Chinese contract law and international commercial transactions.