• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.424-425
• /
• 2018

In the introduction, this paper introduces LS Industrial Systems' medium-voltage drive installed at Hyundai Green Power, an 800MW gas power plant. In the body, it explains the synchronous transfer technology and new speed search technology applied to Forced Draft(FD) Fan and Boiler Feed-water(BF) Pump, which are power generation facilities. Lastly, it shows the annual energy saving amount and operation status which are applied to each facility and proves that it is a successful application case.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.294-303
• /
• 2020

This study discusses data collection, calculation of wind and wave-induced resistance, and speed-power analysis of an 8,600 TEU container ship. Data acquisition system of the ship operator was improved to obtain the data necessary for the analysis, which was accomplished using SPA (Ship Performance Analysis, Park et al., 2019) in conformation with ISO15016:2015. From a previous operation profile of the container, the standard operating conditions of mean draft were 12.5 m and 13.6 m, which were defined with the mean stowage configuration of each condition. Model tests, including the load-variation test, were conducted to validate new ship performance and for the speed-power analysis. The major part of the added resistance of container ship is due to the wind. To check the reliability of wind-resistance calculation results, the resistance coefficients, added resistance, and speed-power analysis results using the Fujiwara regression formula (ISO15016:2015) and Computational fluid dynamics (Ryu et al., 2016; Jeon et al., 2017) analysis were compared. Wind speed and direction measured using an anemometer were used for wind-resistance calculation and the wave resistance was calculated using the wave-height and direction-data from weather information. Also, measured water temperature was used to calculate the increase in resistance owing to the deviation in water density. As a result, the SPA analysis using measured data and weather information was proved to be valid and able to identify the ship's resistance propulsion performance. Even with little difference in the air-resistance coefficient value, both methods provide sufficient accuracy for speed-power analysis. The differences were unnoticeable when the speed-power analysis results using each method were compared. Also, speed-power analysis results of the 8,600 TEU container ship in two draft conditions show acceptable trends when compared with the model test results and are also able to show power increase owing to hull fouling and aging. Thus, results of speed-power analysis of the existing 8,600 TEU container ship using the SPA program appropriately exhibit the characteristics of speed-power performance in deal conditions.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.36-41
• /
• 2014

The structure of a variable liquid column oscillator(a VLCO) is analogous to that of the tuned liquid column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. The VLCO is a system absorbing high kinetic energy of accelerated motions of the multiple floating bodies in the effect of air springs occurred by installation of inner air chambers. Thus, VLCO can improve the efficiency of energy than wave energy converters of the activating object type made in Pelamis Company. In this research, the experiment was performed in two models of same draft. The one is that weights were filled, and the other is that water was filled. The numerical results were estimated by assuming that do not exist internal flow, and the results were compared with the results of experiments.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.117-126
• /
• 2013

This paper is written for the development and application of boiler furnace pressure control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. The control algorithms were designed in the shape of cascade control for two parts of furnace pressure control and induced draft fan pitch blade by standard function blocks. This control algorithms were coded to the control programs of distributed control systems. The simulator for coal-fired power plant was used in the test step and automatic control, sequence control and emergency stop tests were performed successfully like the tests of the actual power plant. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.197-202
• /
• 2022

성 중립 징병제는 인구절벽 시대에서 군이 요구하는 인력 수준을 유지하고 양성평등의 개념을 확대할 수 있는 제도이다. 유럽 최초로 성 중립 징병제를 시행한 노르웨이의 사례를 통해 선택적 징병제 검토 필요성, 양성평등을 위한 군내 조직문화 개선 필요성 등 한국군에 주는 시사점을 도출해보았다. 여성의 사회참여 확대와 인권향상으로 전통적 남성의 영역이었던 군도 여성에게 개방되는 속도가 빨라지고 있다. 다만, 우리나라에 징병제를 여성까지 확대하기 위해서는 필요한 제반 시설, 복무기간, 급여수준, 전투력 유지 등에 대한 각종 우려를 극복해야 할 것이다. 국가가 처한 안보환경과 여성의 사회참여 정도, 국가내 소수자들의 처우 등이 모두 다르기에 우리도 성 중립 징병제를 시행하는 것이 옳다는 결론을 내리기는 어렵다. 그렇지만 미래를 대비하는 국가전략은 결론이 쉽게 나오지 않고 결론이 불편한 진실이라고 해서 멈출 수 없기에 이 논문을 시작으로 여성을 징병제에 포함하는 방안에 대한 건전한 담론이 형성되길 기대한다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.182-193
• /
• 2016

Introduction of intermittent electricity production systems like wind and solar power to electricity market together with the deregulation of electricity markets resulted in numerous start/stops, load variations and off-design operation of water turbines. Hydraulic turbines suffer from the varying loads exerted on their stationary and rotating parts during load variations since they are not designed for such operating conditions. Investigations on part load operation of single regulated turbines, i.e., Francis and propeller, proved the formation of a rotating vortex rope (RVR) in the draft tube. The RVR induces pressure pulsations in the axial and rotating directions called plunging and rotating modes, respectively. This results in oscillating forces with two different frequencies on the runner blades, bearings and other rotating parts of the turbine. This study investigates the effect of transient operations on the pressure fluctuations exerted on the runner and mechanism of the RVR formation/mitigation. Draft tube and runner blades of the Porjus U9 model, a Kaplan turbine, were equipped with pressure sensors for this purpose. The model was run in off-cam mode during different load variations. The results showed that the transients between the best efficiency point and the high load occurs in a smooth way. However, during transitions to the part load a RVR forms in the draft tube which induces high level of fluctuations with two frequencies on the runner; plunging and rotating mode. Formation of the RVR during the load rejections coincides with sudden pressure change on the runner while its mitigation occurs in a smooth way.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.292-303
• /
• 2011

This research suggested a draft proposal for a smart jacket design, which has applied wearable technologies to provide convenience in daily life. The smart jacket combined with a vest was the casual item for autumn and winter. The heating device was composed of the heating element, battery, controller, electric wire, connector, switch, and charger. A stable electronic conductor fiber of good heating effect with a flexible zigzag form has been selected for the heating element. The lighting device has been made in a way that attaches the LED and its power controller in the same mechanical device. As the result of the wearing test, the heating effect turned out to be effective in the order of: back, both the back and abdomen and only the abdomen. When wearing a smart jacket, the back and abdomen have been selected as favorable body parts for heating. Pockets and hems are selected as the adequate place to attach the LED lighting, and the brightness of LED lighting has turned out to be suitable and useful. Based on the test results, the first draft proposal has attached the heating element only in the back and its controller located in the inside pocket of the vest. In addition, the LED has been attached to the front pocket of the jacket. As to the second draft proposal, heating elements have been placed in the back and the abdomen. Each controller for the heating elements has been placed in the front and inside pocket of vest, and the LED lighting has been attached to the hem of the jacket. The smart jacket combined with a wearable device was assessed by functioning categories. The user showed a high satisfaction in the heating and illuminating function of a smart jacket.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.103-107
• /
• 2013

The structure of a variable liquid column oscillator(a VLCO) is analogous to that of the tuned liquid column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. The VLCO is a system absorbing high kinetic energy of accelerated motions of multiple floating bodies in the effect of air springs occurred by installation of inner air chambers. Thus, VLCO can improve the efficiency of energy than wave energy converters of the activating object type made in Pelamis Company. In this research, the experiment was performed that a simple floating body was filled with internal fluid of same draft. The characteristics of motions were evaluated in each case of the opening or closing of the upper valves.

• 융합보안논문지
• /
• 제12권3호
• /
• pp.27-34
• /
• 2012

본 논문에서는 IEEE와 ZigBee Alliance에서 제정한 국제 표준안과 호환성을 가지고, 저전력 저비용을 강점으로 하는 지그비를 이용하여 상대적으로 열악한 전송 환경을 갖지만 적용이 용이한 무선망과, 기존 무선 기반 센서 네트워크 단점을 극복하기 위해 이미 구축되어 있는 동축케이블을 이용한 유선망을 연동함에 있어서 RSSI 모니터링을 통한 출력파워 조절 알고리즘을 이용하여 저전력 소모를 특징으로 하는 지그비 장치의 새로운 저전력 소모 방안을 제시하였다. 보다 최적화된 저전력 소모를 가능하도록 실험을 통해 RSSI 모니터링을 통한 출력 파워 조절 알고리즘의 유효성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.359-361
• /
• 2005

It is essential for testing and model validations about generator and controls for stability analysis in power system. After two large disruptions, field testings were much more important and tested for all generators of greater than 10MW. It compared and reviewed about testing and modeling of WSCC, Powertech, and domestic's. This paper points out insufficient testing items and presents complementary testing draft considering domestic circumstance.