• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.100-106
• /
• 2006

A hypertonic solution of sorbitol was used to precondition Douglas-fir and Western hemlock plug seedlings to improve desiccation resistance. Seedlings were preconditioned by soaking their root balls in water, -0.75 or -1.50 MPa sorbitol solution for 22 hr, and then exposed to desiccation conditions for 8 days. During the desiccation period, a transpirational water loss was significantly reduced by the sorbitol preconditioning, with its effect positively depending on concentration. This preconditioning-induced reduction in water loss was mainly caused by the decline in needle stomatal conductance. Sorbitol-induced stomatal control was more closely associated with reduction in plant water potential, rather than increase in abscisic acid concentrations. After rehydration of stressed-plants, most of the preconditioned seedlings with sorbitol were survived, while only 35% of Douglas-fir and 28% of Western hemlock seedlings treated with water were alive. The post-growth was significantly greater in the preconditioned seedlings than only water-treated seedlings. These results suggested that the earlier stomatal control with sorbitol-facilitated preconditioning could play a role in improving desiccation resistance of evergreen woody plants at transplanting in the field where water supply is limited or dry conditions are prevailing.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.302-314
• /
• 2016

This study was carried out to confirm the effects of the knife-incising and kerfing pretreatment on the moisture content and surface check occurrence of Douglas-fir heavy timber. In the case of moisture content, the moisture gradient that formed in the inner part of the specimen was observed in all specimens. In addition, the moisture gradient was formed differently from the surface layer to 72 mm depending on the pretreatment conditions, and it was formed gradually in the kerfing than the knife-incising. In addition, it was found that the solid volume should be considered when measuring the average moisture content. In the case of surface check, the surface check occurrence was reduced in the knife-incising, kerfing, and the combination of knife-incising and kerfing than the control. In particular, the kerfing treatment was shown that the expansion of surface check width was effectively suppressed. In the case of knife-incising treatment, although the surface check was less than the control, the preventive effect on the surface check occurrence did not reach the level of the kerfing treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.576-582
• /
• 2013

To obtain the basic information on wood preservative process using copper, the penetration ACQ-2 preservative agent into Douglas fir wood and its degradational characteristics were investigated. Douglas fir is known to be difficult for preservative agent injection. To find the hindrance factor of the preservatives movement, the ray height, ray density, and length of tracheid were measured and observed by a stereoscopic microscope and scanning electron microscope. The results were compared in the well-penetrated parts of preservatives and insufficient parts. There were no significant differences in height, length, and density between both parts, except for the pits of the wood elements observed in SEM micrograph. More declosed pits were found in the well-penetrated parts of preservatives. Decay characteristics of wood specimen treated with various ACQ concentrations by brown-rot fungi was observed by an optical microscope. The decayed properties of tracheid, rays, and resin canals was found in the non-treated wood specimens and it was also found that some extent of preservatives concentration is necessary to protect the decay.

• Korean Journal of Agricultural Science
• /
• v.21 no.2
• /
• pp.103-110
• /
• 1994

Since the supply of the Southeast Asian tropical timber decreases and its price steeply increases in the international lumber market, door and window frame manufacturers in this country are eagerly searching for their substitutes. This is the first step to replace Southeast Asian tropical timber by low grade North American softwoods, whose reliable and steady supply is expected, but their appearances are not as good as the tropical timber. In this study, knot distribution on the softwood boards and their warp were examined The yield and production cost were also calculated. The average numbers of knots on a door frame were 7.2 for Douglas-fir and 3.4 for Western hemlock. Only 11% of the knots of Douglas-fir door frames are larger than 5cm in diameter, while are 35% of the knots of Western hemlock. The deformations of door frames, after 2 months air-drying, were measured with a warp table. The deformations of Western hemlock door frames were mostly less than 6mm, while those of Douglas-fir distributed in the range of 0.5 and 9.5mm. The yield of Western hemlock is higher than that of Douglas-fir. It can be concluded that the door frames made of the softwoods are compatible with those made of the tropical timber in most aspects except appearance.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.38-45
• /
• 2007

Flakeboards made from ring- and drum-cut flakes of Douglas-fir, hemlock, red lauan and kapur using two kinds of resin levels were evaluated for the selected properties according to flake thickness. The pH and buffering capacity of four species were determined. Those of kapur were extremely different from the other three species. These pH and buffering capacity values result in the poor internal bond strength of kapur flakeboard. The internal bond strength was affected significantly by flake thickness, resin content and species. MOR and MOE in bending strength were maximized at medium drum-cut flake thickness. Screw holding strength was not consistent for flake thickness, but it was influenced by species. Thickness swelling and water absorption of Douglas-fir and hemlock flakeboard were minimized at medium drum-cut flake thickness.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.1-6
• /
• 2007

Boiling-in-oil process was performed to investigate the high-temperature drying characteristics of 25, 50, and 70 mm-thick flat-sawn Douglas-fir lumber. Drying rates, moisture profiles and temperature profiles were monitored. Fully refined paraffin wax was used as drying agent and heated to $130^{\circ}C$. Average drying rates of 25, 50, and 70 mm-thick specimen were 11.6, 6.7, 5.0%/h, respectively. The moisture content differences between cores and ends were 1~2% in 25 mm-thick and 200 mm-long sample and over 10% in 50 mm-thick and 600 mm-long sample.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.8-11
• /
• 2014

In this study, we attempted to find substitute materials for bottle cultivation of Pleurotus ostreatus such as poplar sawdust. The chemical characters of mixture substrates with albasia, poplar and douglas fir sawdust were not different significantly. Incubation period was shorter in the albasia sawdust 50% treatment than in the albasia sawdust 100% treatment. The yield and bio-efficiency of fruit-body albasia sawdust 50% treatment, were similar to the poplar 100% and douglas fir 100% treatment. Therefore, it was suggested that albasia sawdust 50% treatment could be substituted for poplar and douglas fir sawdust for bottle cultivation of P. ostreatus.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.14-18
• /
• 2018

The earlier studies on the fire resistance performance of woods used as building materials have focused on confirming combustion characteristics of fire retardant or flame resistant treated wood. In this paper, to confirm internal temperature changes closely related to pyrolysis of woods exposed to the flame, heating experiments were conducted in a heating furnace according to the standard heating temperature curves after Douglas-fir, which is widely used as structural materials, was treated with a flame resistant solution and flame retardant paint. As a result of the experiment, it was confirmed that the thermal diffusion inside the wood has decreased when the wood was treated with the flame resistant solution. However, in high temperature, the flame resistant effect could not be expected due to the peeling of the coating in the case of the flame resistant paint treated wood. Therefore, it can be considered that it is more effective to use the flame resistant solution which penetrates in to the inside of the wood than flame resistant paint which forms the coating on the surface of the wood in order to enhance the flame resistance effect on the thick wood.

• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.161-165
• /
• 2011

Small scale mushroom growers take a lot of the costs in the bottle cultivation than the large scale growers. Therefore, they are not competitive in the market. Mushroom cultivation in small scale mushroom farm is labor-intensive and this experiment was carried out to establish the method for the cultivation of various kinds of mushrooms together under the similar conditions in the production system. As a result, the common medium were selected based on the growing conditions of Pleurotus eryngii and Agrocybe cylindracea, and the level of medium moisture content were studied. The results were shown below. When the medium in the input stage for bottle cultivation was filled by using automatic machine, the range of the three state rates in the bottle is different depending on ingredients and the mixing ratio. The optimum moisture content of the medium for some mushroom production was a different trend based on the medium cluster of the raw materials. The optimum moisture content for P. eryngii in the medium was 70% (douglas fir sawdust, rice bran or sawdust, dried bean curd refuse). In the medium containing douglas fir sawdust, wheat bran was 65%, and the medium including douglas fir sawdust, wheat bran, dried bean curd refuse was 67%. The optimum moisture content of the above three media for A. cylindracea was 70%. The suitable medium for the bottle cultivation of P. eryngii was selected as douglas fir sawdust 75%, wheat bran 20%, dried bean curd refuse 5%, and moisture content 67%. The medium of A. cylindracea was selected as douglas fir sawdust 75%, wheat bran 25%, and moisture content 70%. The suitable medium for bottle cultivation of P. eryngii and A. cylindracea was shown as douglas fir sawdust 75%, rice bran20%, dried bean curd refuse 5%, and 70% moisture content to be used as a common medium of the growing. The incubation period, primordial formation, and growth environment conditions of P. eryngii and A. cylindracea were a similar trend. Therefore, the small scale farmers of P. eryngii can cultivate A. cylindracea together with P. eryngii.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.