• The Journal of Korean Physical Therapy
• /
• 제25권4호
• /
• pp.210-216
• /
• 2013

Purpose: A cost effective tool for the clinical measurement of trunk reposition sense is clearly needed. This study was to analyze intrarater and interrater Reliability of trunk repositioning error (TRE) test which assesses trunk position sense using a portable digital inclinometer. Methods: Twenty four normal healthy subjects were recruited. TRE was measured using a portable digital inclinometer. A digital inclinometer (Acumar-ACU360; Lafayetter Instrument) with precision to $1^{\circ}$ was placed on skin over the spinous process from first to second thoracic vertebra (T1-T2) and secured with double-sided tape. TRE test during sitting forward and lateral flexion movement was assessed. When they reached a point approximately 50% of full trunk flexion range, the examiner instructed the subjects to stop and told them. This was the target position that they should try to reproduce exactly. Each subject performed six trials. Results: ICC (2,1) for intrarater reliability (with-day and between-day) of TRE test in sagittal and frontal plane of movement was 0.75 and 0.78 (excellent reliability). Interrater reliability was 0.66 in sagittal and 0.64, frontal plane (fair to good reliability). However, there were poor correlations between an average of TRE test in sagittal and frontal plane. Conclusion: TRE test using a portable digital inclinometer demonstrated good to excellent reliability. The device may be a cost effective clinical measurement for trunk reposition sense measurement.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.181-185
• /
• 2018

Objective: The purpose of this study was to investigate the effect of types of drive-in initial steps in basketball on technical factors, to provide basic information for the enhancement of basketball skill. Method: Ten men (age: $24.70{\pm}2.26years$; height: $181.00{\pm}5.72cm$; weight: $75.70{\pm}8.23kg$; career length: $10.00{\pm}3.59years$), each with a career length of over five years and no history of injury to the lower extremities within the prior six months, participated in this study. They were asked to perform four types of drive-in movements at $35{\sim}60^{\circ}$, wearing their own shoes, after running from a start line 5 m away and catching a basketball passed by an expert passer. The drive-in movements were measured by eight infrared cameras (Oqus 300, Qualisys, Sweden). Collected raw data were used to calculate total initial step time, displacement, velocity, center of mass (COM) height, and COM velocity. Results: Total initial step displacement and velocity of cross drive-ins (JC, SC) were greater than that of direct drive-ins (JD, SD; p < .05). COM velocity of cross drive-ins (JC, SC) was also greater than that of direct drive-ins (JD, SD; p < .05). Conclusion: Our results indicated that cross drive-ins, regardless of stop step type, are more effective than direct drive-ins. This is because cross drive-ins are technically bold due to less influence from walking violations and double dribble rules in basketball. However, using one-sided movement is too difficult to play in competitive game; therefore, basketball players should develop the ability to choose appropriate movement frequency.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.547-554
• /
• 2013

이 연구에서는 UHPFRC에 대해 강섬유의 인발실험을 수행하고, 그 결과로부터 매트릭스에 대한 강섬유의 부착강도를 정량적으로 평가하고자 하였다. 실험은 여러 개의 섬유를 이용한 양면 인발실험을 적용하였다. 섬유분포밀도에 따른 영향을 파악해 본 결과, 이 연구에서 고려한 섬유분포밀도의 범위는 섬유 간 상호간섭효과를 나타내지 않는 범위임을 확인하였다. 최대 인발하중 상태의 하중 또는 흡수에너지, 완전 뽑힘 상태의 흡수에너지를 고려한 몇 가지 방법들로 부착강도를 평가한 결과, 완전 뽑힘 상태의 흡수에너지로부터 구한 부착강도는 섬유의 묻힘길이에 영향을 받는 것으로 나타났다. 그리고 최대 인발하중 상태로부터 구한 부착강도는 평균적으로 약 6.64 MPa의 부착강도를 나타냈으며, 이 값은 최대 인발하중만으로 구한 부착강도 6.46 MPa와 비교했을 때 큰 차이가 없는 것으로 나타났다. 실험 및 평가의 용이성을 고려할 때 최대 인발하중만으로 부착강도를 평가해도 무방할 것으로 판단된다.

• 전자공학회논문지D
• /
• 제36D권12호
• /
• pp.11-20
• /
• 1999

직접 결합과 사이 결합을 이용하여 신호를 인가하는 두 가지 경우의 마이크로스트립 헤어핀 콤 여파기를 직경 50 mm, 두께 0.5 mm인 하나의 $LaAlO_3$ 기판 위에 양면 증착한 YBCO 박막을 이용하여 설계 제작하였다. 두 가지 헤어핀 콤 여파기 모두 중심 주파수가 1.773 GHz 이였고, 대역폭이 12 MHz 이었으며, 통과 대역에서 최소 삽입 손실이 0.5 dB 이었고, 저지 대역에서는 매우 강한 반사 손실 특성을 지니고 있었다. 직접 결합 헤어핀 콤 여파기는 통과 대역 아래쪽과 위쪽에 감쇠 폴이 생겼으나, 사이 결합 헤어핀 콤 여파기는 통과 대역 아래쪽에서만 감쇠 폴이 존재하였다. 따라서 직접 결합 헤어핀 콤 여파기가 사이 결합 헤어핀 콤 여파기에 비해서 더 좋은 스커트 특성을 보여주었다.

• 패션비즈니스
• /
• 제14권5호
• /
• pp.78-92
• /
• 2010

The culture phenomenon, which the desire of self expression is noticeable and the diversity of gender identity is widely accepted, simply makes a difference in the lifestyle of one human being rather than the dichotomous classification of male and female. Now, the delicate and aesthetic sensitivity classified as the feminine characteristics is no longer the exclusive property of female and this refers to substituting it as a social gender from the concept of biological sex. This phenomenon has influenced on the male culture and is creating various codes according to the cultural gender extended from the gender as a social role. Also, the transition into the western lifestyle has extended the aesthetic emotion to accommodate new codes from the diversification and globalization of lifestyle. The mansumer power, which does not care too much about the money for the emotionally attached items, has enabled various fashion styles. After analyzing the diversified clothing behavior conducted by these people in connection with the social phenomenon, First, this shows the phenomenon of emotional value pursuit that finds pleasure over the clothing as the item of augmented reality is added to the concept of play, in which the real space referred to as garment and virtual space of playing the rock, paper and scissors game meet together within the augmented reality. Second, the convergence concept has enabled the coordination of new style by obscuring the area of design concept and this refers to the changes in design from the development of new items and transformation into double-style details. Third, the divergence that intensively provides specific use/convenience and specialized value shows a change in the fashion market from the phenomenon that admits various gene rations of culture and specifically, takes differently about the recognition of middle-aged males. Fourth, the variety seeking tendency receives attention as the value of future design together with the phenomenon of discriminative value pursuit. In the male fashion, it is linked to the collaboration with the design area and this tells that the fashion with the narcissistic cross-dressing and motto of neutral gender without being sided to male/female is rising.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.84-90
• /
• 2015

복합자재(샌드위치패널)는 불연성재료인 양면 철판 또는 이와 유사한 재료와 불연성이 아닌 재료인 심재로 구성된다. 단열재를 가연성 재료로 사용하는 샌드위치패널은 화재 시 철판 내부로 화염이 확산되어 외부에서 진화가 어렵고 화염의 확산이 빠르게 진행되어 건물의 붕괴를 야기할 수 있다. 현행 건축법에 의해 샌드위치패널은 건축물의 용도 및 규모에 따라 난연성능을 확보하도록 하고 있다. 본 연구에서는 일부 외벽에 적용되는 화재확산방지구조를 복합자재에 적용하여 실제 규모의 화재시험을 통해 그 효과를 측정하였으며 향후 복합자재에서도 화재확산방지구조의 적용을 통해 복합자재 건축물의 화재안전 확보 가능성을 제시하였다.

• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• 복식
• /
• 제56권9호
• /
• pp.14-23
• /
• 2006

The purpose of this study is to identify the esthetic features of femme fatale character fashions, which are shown in Movie . The feature of evil femineity is the attribute of evil which brings men to ruin by the dangerous, cunning, and cruel trick, and is expressed in black color, red color, and slash fashion. This fashion shows the dark reverse side of women's sexual desire in relation to anxiety, evil, and death. The feature of sensuality evokes physical pleasures or desires, and maximizes the exposure of sexual regions by tightening or loosening women's body. In the fashion expressing this feature, the forms are fit or loose silhouette. and the colors are black and red. and the materials are soft. This fashion seems to deconstruct the past concept of sex consciousness and emphasize the independent and autonomous femineity. The feature of positiveness combines feminine elements with masculine elements in relation to power elements. This feature is expressed in tailored suit and trousers, with few patterns and details, and in black color and gray color. This fashion reflects the aggressive, challenging, and independent femineity, and expresses the potential defense for the weakness and danger of female body. The feature of purity expresses the earnest and truthful mind, and is expressed in the soft and light one-piece dress, the elegant suit, and the pink color and black color fashion. This fashion shows angel-like and reliable womanly beauty, but at the same time shows women's attribute which changes their behavior and thinking every moment, so that this fashion shows women's double-sided attribute which combines women's weakness and violence, or tenacity and conflict.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.380-387
• /
• 2015

A lead slowing-down spectrometer (LSDS) system is a promising nondestructive assay technique that enables a quantitative measurement of the isotopic contents of major fissile isotopes in spent nuclear fuel and its pyroprocessing counterparts, such as $^{235}U$, $^{239}Pu$, $^{241}Pu$, and, potentially, minor actinides. The LSDS system currently under development at the Korea Atomic Energy Research Institute (Daejeon, Korea) is planned to utilize a high-flux ($>10^{12}n/cm^2{\cdot}s$) neutron source comprised of a high-energy (30 MeV)/high-current (~2 A) electron beam and a heavy metal target, which results in a very intense and complex radiation field for the facility, thus demanding structural shielding to guarantee the safety. Optimization of the structural shielding design was conducted using MCNPX for neutron dose rate evaluation of several representative hypothetical designs. In order to satisfy the construction cost and neutron attenuation capability of the facility, while simultaneously achieving the aimed dose rate limit (< $0.06{\mu}Sv/h$), a few shielding materials [high-density polyethylene (HDPE)eBorax, $B_4C$, and $Li_2CO_3$] were considered for the main neutron absorber layer, which is encapsulated within the double-sided concrete wall. The MCNP simulation indicated that HDPE-Borax is the most efficient among the aforementioned candidate materials, and the combined thickness of the shielding layers should exceed 100 cm to satisfy the dose limit on the outside surface of the shielding wall of the facility when limiting the thickness of the HDPE-Borax intermediate layer to below 5 cm. However, the shielding wall must include the instrumentation and installation holes for the LSDS system. The radiation leakage through the holes was substantially mitigated by adopting a zigzag-shape with concrete covers on both sides. The suggested optimized design of the shielding structure satisfies the dose rate limit and can be used for the construction of a facility in the near future.

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.260-267
• /
• 2016

인터넷을 통해 많은 정보를 얻고 많은 정보를 타인에게 제공하면서 개인의 삶의 양식에 큰 변화를 가져다주었다. 모든 사회 현상에는 양면성이 있듯이 인터넷 익명성을 이용하여 명예훼손, 인신공격, 사생활 침해등과 같이 악의적으로 이용하여 사회적으로 심각한 문제를 양산하고 있다. 인터넷 게시판의 악성댓글은 인터넷에서 발생하는 불법적인 언사나 행위와 관련하여 가장 대두되고 있는 문제이다. 이러한 문제를 해결하기 위해 많은 연구가 진행되고 있지만 악성댓글에 사용된 단어들은 변형이 많이 나타나기 때문에 기존 연구들은 이러한 변형된 악성어휘를 인식하는데 한계점이 존재한다. 이에 본 연구에서는 기존 연구의 한계점을 개선하여 악성댓글을 탐지하는 기법을 제안한다. 실험결과 87.8%의 정확도를 나타냈으며, 이는 기존 연구들에 비해 상당히 발전된 결과로 볼 수 있다.