• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.723-724
• /
• 2008

The rotational loss is one of the most important problems for the practical applications of PM synchronous motor/generator. This rotational loss is divided as the mechanical loss by windage and bearing and iron loss by hysteresis loop and eddy current in the part of the magnetic field. So, In this paper, a double-sided PMSM/G without the iron loss is designed by analytical method of the magnetic field and estimation of the back-EMF constant represented as the design parameter. This design model consists of the double-sided PM rotor with Halbach magnetized array and coreless 3-phase winding stator. The results show that the double-sided PMSM/G without iron loss can be applicable to the required system without the rotational loss.

• 한국자기학회지
• /
• 제25권2호
• /
• pp.58-65
• /
• 2015

본 논문은 양측식 슬롯리스 고정자 할박 배열 영구자석 선형 발전기의 발전특성해석을 하였다. 자기 벡터자위와 맥스웰 방정식 이용하여 지배방정식을 도출하고, 특히 영구자석 자화와 고정자 권선의 전류밀도 분포는 무한 푸리에 급수을 이용하여 모델링 하였다. 도출된 지배방정식으로부터, 영구자석 및 고정자 권선에 의한 자계 특성식과 역기전력, 저항, 인덕턴스와 같은 회로정수를 도출 하였다. 발전 특성 해석 결과는 유한요소 해석법과 비교하여 매우 잘 부합함을 확인함으로 그 타당성이 검증되었다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.243-249
• /
• 2005

A mobile antenna for multimedia communications with Ku-band geostationary satellite KOREASAT-3 and JSAT-2A is presented. The forward link of the satellite communication is 11.7 to 12.75 GHz, and the return link is 14.0 to 14.5 GHz. The mobile antenna is designed to be a stair structure using 24 active phased array elements in order to provide a low profile, and to be at a non-periodic array distance using the genetic algorithm. Also, the designed antenna uses the double beam forming method for stable satellite tracking. The fabricated mobile antenna is examined using various experiments to confirm its capability for practical application. From the measured results, the fabricated mobile antenna system is confirmed to have a good performance.

• The Journal of the Acoustical Society of Korea
• /
• 제28권2E호
• /
• pp.51-59
• /
• 2009

Mutual radiation impedance becomes more important in the design and analysis of acoustic transducers for higher power, better beam pattern, and wider bandwidth at low frequency sonar systems. This review paper focused on literature survey about the researches of mutual radiation impedance in the acoustic transducer arrays over 60 years. The papers of mutual radiation impedance were summarized in terms of transducer array structures on various baffle geometries such as planar, cylindrical, spherical, conformal, spheroidal, and elliptic cylindrical arrays. Then the computation schemes of solving conventional quadruple integral in the definition of mutual radiation impedance were surveyed including spatial convolution method, which reduces the quadruple integral to a double integral for efficient computation.

• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1115-1124
• /
• 1988

A two-dimensional systolic array for fast Fourier transform, which has a regular and recursive VLSI architecture is presented. The array is constructed with identical processing elements (PE) in mesh type, and due to its modularity, it can be expanded to an arbitrary size. A processing element consists of two data routing units, a butterfly arithmetic unit and a simple control unit. The array computes FFT through three procedures` I/O pipelining, data shuffling and butterfly arithmetic. By utilizing parallelism, pipelining and local communication geometry during data movement, the two-dimensional systolic array eliminates global and irregular commutation problems, which have been a limiting factor in VLSI implementation of FFT processor. The systolic array executes a half butterfly arithmetic based on a distributed arithmetic that can carry out multiplication with only adders. Also, the systolic array provides 100% PE activity, i.e., none of the PEs are idle at any time. A chip for half butterfly arithmetic, which consists of two BLC adders and registers, has been fabricated using a 3-um single metal P-well CMOS technology. With the half butterfly arithmetic execution time of about 500 ns which has been obtained b critical path delay simulation, totla FFT execution time for 1024 points is estimated about 16.6 us at clock frequency of 20MHz. A one-PE chip expnsible to anly size of array is being fabricated using a 2-um, double metal, P-well CMOS process. The chip was layouted using standard cell library and macrocell of BLC adder with the aid of auto-routing software. It consists of around 6000 transistors and 68 I/O pads on 3.4x2.8mm\ulcornerarea. A built-i self-testing circuit, BILBO (Built-In Logic Block Observation), was employed at the expense of 3% hardware overhead.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.86-88
• /
• 2008

The rotational loss is one of the most important problems for the practical use of the high power Flywheel Energy Storage System (FESS). This rotational loss is divided as the mechanical loss by windage and bearing and iron loss by hysteresis loop and eddy current in the part of the magnetic field. So, In this paper, a double-sided PMSM/G without the iron loss is designed by analytical method of the magnetic field and estimation of the back-EMF constant represented as the design parameter. This design model consists of the double-sided PM rotor with Halbach magnetized any and coreless 3-phase winding stator. The results show that the double-sided PMSM/G without iron loss can be applicable to the high power FESS.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1027-1032
• /
• 2003

Thermo-mechanical behavior of flip-chip plastic ball grid array (FC-PBGA) packages are characterized by high sensitive $Moir{\acute{e}}$ interferometry. $Moir{\acute{e}}$ fringe patterns are recorded and analyzed for several temperatures. Deformation analysis of bending displacements of the packages and average strains in the solder balls for a single-sided package assembly and a double-sided package assembly are presented. The bending displacement of the double-sided package assembly is smaller than that of the single-sided one. The largest of effective strain occurred in the solder ball located at the edge of the chip and its magnitude of the double-sided package assembly is greater than that of single-sided one.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.559-566
• /
• 2016

Cables for Towed Array Sonar System(TASS) were developed. In order to verify the performance of cables, environmental and operational conditions as well as functional requirements were investigated during design stage. Double armored high and low voltage integrated cable for towed body and two kinds of cables, armored and light weight power and optic hybrid cables for towed array sensor system were developed by modeling and simulation. Customized manufacturing process and test method, such as foam extrusion and dynamic fatigue test were applied to this development. In conclusion, underwater towed hybrid cable with high tensile strength and compact structure were developed.

• 대한전자공학회논문지SD
• /
• 제44권2호
• /
• pp.55-60
• /
• 2007

본 논문에서는 1차원 CMOS 포토다이오드 픽셀 어레이를 이용한 광학 각도 센서에서, 해상도를 2배 향상시키는 인터폴레이션 방법을 제안한다. 제안된 구조는 인터폴레이션을 위하여 모든 픽셀을 짝수 픽셀 그룹과 홀수 픽셀 그룹으로 나누어, 각 그룹에서 가장 밝은 빛이 들어오는 픽셀(winner)을 winner take all 회로를 이용하여 찾아 이로부터 인터폴레이션을 수행하여 각도 센서의 해상도를 2배 향상시킨다. 제안된 인터폴레이션 방법은 픽셀이나 WTA 회로의 추가없이 간단히 하나의 XOR 게이트와 전압 비교기 회로를 이용하여 구현할 수 있다. $5.6{\mu}m$의 픽셀 피치를 가진 336개의 포토다이오드 픽셀 어레이를 $0.35{\mu}m$ CMOS 공정으로 구현한 후, 그 위에 $50{\mu}m$ 폭의 슬릿을 붙여서 광학 센서를 구성하여 실험하였다. 측정된 각도 해상도는 $0.1{\circ}$이며 35mW의 전력을 소모하고 최대 초당 8000번 각도를 측정할 수 있다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권3호
• /
• pp.174-181
• /
• 2014

선형발전기가 연결된 부이의 수직운동에 대한 시간영역 해석을 수행하여 얻은 시계열 자료를 가지고 선형발전기를 설계하고 전기에너지 출력특성 및 효율에 대해 살펴보았다. 1차 변환장치로 원통형 부이를 선택하였고, 2차 변환장치로 양측식 할박(Halbach) 배열 영구자석 가동자와 철심형 슬롯리스(Slotless) 고정자로 구성된 선형발전기를 사용하였다. 시간영역에서 부이의 수직운동 속도와 파랑하중을 입력자료로 직선형 영구자석 발전기가 설계되었고, 설계된 발전기는 규칙파 조건에서 유한요소 해석법을 적용하여 발전특성해석을 수행함으로써, 그 타당성이 입증되었다. 또한 불규칙파 조건에서 합리적이고 빠른 해석을 위해, 등가회로법을 적용하여 발전특성 해석을 수행하였는데, 그 결과 역시 매우 타당함을 확인하였다.